Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

2040 question

Welcome Guest, Log in or Register
Author 
Le

11-12-2003 14:58:06




Report to Moderator

Does anyone know if a 2040 with a 145 loader can handle 5' round bales on both the front and rear?

Is 6895 a good price for one with loader?

Thanks
Le




[Log in to Reply]   [No Email]
blake

11-15-2003 21:41:40




Report to Moderator
 Re: 2040 question in reply to Le, 11-12-2003 14:58:06  
I gave $6600 dollars for my 1979 2040 it came with a 6ft bushhog, it really looked bad but as far as running it was in good shape, I have recently painted it and replaced all the lines and hoses, My rear main seal has recently started to leak so I am going to have to replace that eventually but I don't have equipment to split it with and the dealer said I was looking at about 500dollars for them to do it, so far I only use for cutting grass and using a box blade, but I am really happy with it, the lever you asked about on the left hand side is for locking the differential, when I bought mine I had no idea what it was so I pressed it down with my foot and then tried to steer, dont try that because it will not steer at all.

[Log in to Reply]  [No Email]
Le

11-16-2003 15:56:25




Report to Moderator
 Re: Re: 2040 question in reply to blake, 11-15-2003 21:41:40  
Well we went back today and got the tractor. The seller had a bunch of suitcase weights setting there so we loaded the bucket up with about 1300lbs and it lifted it with no problem. We did find out we needed to fill with ballast.

Got him down to $6500 for the tractor and 145 loader.

Le



[Log in to Reply]  [No Email]
RAR/IA

11-12-2003 18:28:48




Report to Moderator
 Re: 2040 question in reply to Le, 11-12-2003 14:58:06  
A full size(6'tall) 5'(wide) round bale is going to weigh (alfalfa) over 1000 pounds and is really too much for the front axle. The rear wheels will have no traction. Perhaps it can handle one on the rear, but as close to the tractor as possible and some weight on the front for ballast.

Early 2040's were closed center hydraulics (better for loader work),later ones are open center. Roger



[Log in to Reply]  [No Email]
Le

11-12-2003 18:56:51




Report to Moderator
 Re: Re: 2040 question in reply to RAR/IA, 11-12-2003 18:28:48  
The bales we get are closer to 4' in diameter 5' wide grass and clover. They will fit in the back of a pickup.

Le



[Log in to Reply]  [No Email]
RAR/IA

11-12-2003 20:28:31




Report to Moderator
 Re: Re: Re: 2040 question in reply to Le, 11-12-2003 18:56:51  
Wouldn't hurt to weigh a bale and see what the manuals say for tractor/loader capacity.

One other thing to watch for on the 2040's is the front axle. I believe some were available with a swept back axle. They do not help the situation with a loader.

RAR/IA



[Log in to Reply]  [No Email]
Indydirtfarmer

11-12-2003 15:49:06




Report to Moderator
 Re: 2040 question in reply to Le, 11-12-2003 14:58:06  
The pedal is a differential lock. The lever sounds like the load/draft/load and draft control. Get an owners manual, shop manual, and parts manual, if you buy it. It's a great little tractor. I've worked on a few. I have a 2440. The 2040 will handle a bale on the loader, if you move slowly, and are careful. It'll handle one on the rear easier. If you try to use the loader to move bales, make sure you have sufficient wieght on the rear. Fluid in the tires, cast wieghts, or a heavy impliment, to balance the wieght on the front end. That's a nice loader also. I have one I just recently purchased for the 2440. On the price, if you don't buy it, let me know where it's at. That is a GREAT price, if the tractor is in decent shape. I could turn it around, and make $1500 to $2000 off of it. Hope this helps, John

[Log in to Reply]  [No Email]
Indydirtfarmer

11-12-2003 15:53:31




Report to Moderator
 Re: Re: 2040 question in reply to Indydirtfarmer, 11-12-2003 15:49:06  
The post at the bottom struck a nerve. The lever might be part of the diff. lock. They have a foot petal, as well as a hand lever, cast together, as one piece. Besides, now that I think about it, the load and draft control is on the right side of the tranny. Thanks, John



[Log in to Reply]  [No Email]
Le

11-12-2003 16:58:40




Report to Moderator
 Re: Re: Re: 2040 question in reply to Indydirtfarmer, 11-12-2003 15:53:31  
Can someone tell me when it was made?

Serial #306100L made at the Mannheim plant in Germany.

Le



[Log in to Reply]  [No Email]
cannonball

11-13-2003 04:57:27




Report to Moderator
 Re: Re: Re: Re: 2040 question in reply to Le, 11-12-2003 16:58:40  
my book says its a 1979....have nice day may god bless



[Log in to Reply]  [No Email]
Le

11-13-2003 15:53:48




Report to Moderator
 Re: Re: Re: Re: Re: 2040 question in reply to cannonball, 11-13-2003 04:57:27  
Thanks.

Le



[Log in to Reply]  [No Email]
Mike

11-12-2003 15:19:57




Report to Moderator
 Re: 2040 question in reply to Le, 11-12-2003 14:58:06  
The price seems fair if the tractor is in good condition.But I don't think it's going to move 2 5' round bales. Most 5' bales are in the 1000-1500# range and that is at or beyond the safe capacity of the loader,especially if a spear is attached to the bucket and not the loader itself,add to that, wet muddy ground or snow/frozen and I think it is an accident waiting to happen. It could be done but I think you would be at or over the safe capacity of this tractor/loader combination.JMHO

[Log in to Reply]  [No Email]
Le

11-12-2003 15:25:00




Report to Moderator
 Re: Re: 2040 question in reply to Mike, 11-12-2003 15:19:57  
Woopse! I should have said 1 bale at a time. Either on front or back. Not 2 at once like my post read.

Le



[Log in to Reply]  [No Email]
Le

11-12-2003 15:07:04




Report to Moderator
 Re: 2040 question in reply to Le, 11-12-2003 14:58:06  
Forgot something. On the left side of the tractor below the seat, there is a foot pedal and lever. What is it for and should it move? I know it is not the PTO lever.

Le



[Log in to Reply]  [No Email]
Steve - IN

11-12-2003 15:32:55




Report to Moderator
 Re: Re: 2040 question in reply to Le, 11-12-2003 15:07:04  
Le,

The footpedal: Sounds like you're describing the rear end locker. Gives you "positraction". Just disengage it before you turn.

The lever: have you found any other lever that controls the rear hydraulic outlets? If not, bet that's it. Otherwise, does your 2040 have front and rear PTO? That makes two levers.



[Log in to Reply]  [No Email]
Le

11-12-2003 15:43:23




Report to Moderator
 Re: Re: Re: 2040 question in reply to Steve - IN, 11-12-2003 15:32:55  
No the rear hydraulic lever was elbow level on the right.

I figured the pedal was for a locker but wasn't sure if the tractor had one. It looked like there was a lever built onto the pedal. Shouldn't the pedal move?

It appeared to be stuck down and there was no problem steering the tractor.

Assuming the locker is busted how big of a PITA is it to repair it and how big of a hit in the wallet?

Le

[Log in to Reply]  [No Email]
Brokenwrench

11-12-2003 17:35:01




Report to Moderator
 Re: Re: Re: Re: 2040 question in reply to Le, 11-12-2003 15:43:23  
The diff. lock is not that big of a repair. It requires the removal of the left axle housing. The slider and hub are in the trans case behind the axle housing.Could be as simple as a sheared key on the lever or a broken fork. Worst case scenario is if the broken pieces have done other damage to bearings, or torn up the differential case. Then you will be into some more time and money but parts are easily available at salvage yards.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy