Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

John Deere Model D's

Welcome Guest, Log in or Register
Author 
Greg H.

06-06-2000 13:06:39




Report to Moderator

Does anyone out there have experience with the Model D tractors. I understand that they were primarily tillage tractors, but what type of options did they have? Besides the draw bar, and PTO shaft? Can a standard size PTO shaft be put in a late model D? I am interested in the later D's like those made in the 40's. Also, has anyone ever used one to tractor pull with? I emagine the large cubic inch motor would realy be strong and alot of fun to play with. Finally what can one expect to pay for a good late model D? Any help or suggestions will be apprechiated. Thank you, Greg H.

[Log in to Reply]   [No Email]
Bob

06-10-2000 21:10:34




Report to Moderator
 Re: John Deere Model D's in reply to Greg H., 06-06-2000 13:06:39  
Well we some great comments on the D, it is my favorite trator,I pull a 29 and 38, want to hear music, listen to a twin stacker pulling, can't get over all the smiles when I look over at the grandstand. Had a inside pull in Ogalla, Nebr last Dec the metal roof was about 4 feet above the stacks, well just had to idle out to the 50 foot mark and then jam the throttle wide open, yep think every one for 2 blocks new the old 39 D was rnning.(love it) As for pulling Greg you just can't get the power to the ground and keep the front end down due to there short wheel base, so have to run front weights. I pull in Div 3 and 4, 6500 and 7500# classes, they are tough but its all fun, even only lacked 3/4" of beating my buddies hopped up G once. so get a D, have fun and don't expect to much, you will do all right, I have a few 1 2& 3 place wins, also some 13 and 14 place at the nationals with the only D there. Got a 1st and 3rd the other day. Just watch out for those tough pulling G's, but boy does it feel good if you can beat one. Best of luck, Bob

[Log in to Reply]  [No Email]
bill

06-14-2000 18:19:04




Report to Moderator
 Re: Re: John Deere Model D's in reply to Bob, 06-10-2000 21:10:34  
what do you mean about a twin stacker ?how can i get one for my model D 35



[Log in to Reply]  [No Email]
Gator

06-10-2000 18:56:04




Report to Moderator
 Re: John Deere Model D's in reply to Greg H., 06-06-2000 13:06:39  
I have been pulling a '38 G for a few years with some success and have only had the chance of meeting up with a couple D's. On the old stone boat they were a joy to watch, listen to, and almost unbeatable. On a weight transfer sled up here they are too slow to compete against the "newer" tractors. The Two Cylinders up here have some chance of being competitive if the sleds are run at less than 4 mph otherwise we just donate. Still the sound is like music under a load.

[Log in to Reply]  [No Email]
BigJ

06-08-2000 08:21:54




Report to Moderator
 Re: John Deere Model D's in reply to Greg H., 06-06-2000 13:06:39  
I don't know what weight class it was in,but I saw a D last year at a pull in Crockett Mills TN that was going so fast with the sled they was blowing horns like crazy,so he had to slow down.I have never heard a 2 cylinder turn that many rpm's,and I have been around a lot of them.I wished he could have went back and pulled again wide open without the horns and brakes just to see what it would really do.P.S.The D is the only other tractor that sounds as good as a G to me.Just my two cents worth,Jack(TN).

[Log in to Reply]  [No Email]
RonMC

06-07-2000 18:24:06




Report to Moderator
 Re: John Deere Model D's in reply to Greg H., 06-06-2000 13:06:39  
third party image

I'm really enjoying these D comments. I have been given a D from my cousin's farm, and have to go bring it home - 1200 miles- this summer or fall. How are they to trailer ? I know the weight is around 5200 lb, so it will make the truck snort a little going over the mountains to B.C. Have (hopefully) set up the best photo I have to this point - it looks like a pretty good starting point to me. Am looking forward to making it run, and getting it shiny - it must be the beefy look or something, but I love the look of these machines. More D stories, please !

[Log in to Reply]  [No Email]
Greg H.

06-08-2000 08:06:57




Report to Moderator
 Re: Re: John Deere Model D's in reply to RonMC, 06-07-2000 18:24:06  
Make sure you post a picture after you get the old girl restored. Greg H.



[Log in to Reply]  [No Email]
Wind

06-07-2000 10:33:13




Report to Moderator
 Re: John Deere Model D's in reply to Greg H., 06-06-2000 13:06:39  
Haven't seen that many D's pulling in competition. I think they are pretty heavy and have trouble getting into the lower classes. In the heavier classes, you are not able to add the weight where you really need it for traction. The old girls can really pull though!



[Log in to Reply]  [No Email]
Paul from Michigan

06-06-2000 20:57:54




Report to Moderator
 Re: John Deere Model D's in reply to Greg H., 06-06-2000 13:06:39  
I'm still farming my few acres with a 1948 D. There was a hydraulic kit from Deere that could be installed by the dealer, maybe also could be ordered from the factory with it. It's the same Power Trol unit as the styled AR tractor with a pump mounted between the governor and the magneto. I have a similar setup on mine using a JD pump and aftermarket valve and reservoir. These seem to have been pretty popular, I see them on a lot of unrestored tractors. PTO shaft for a styled D is standard 1-3/8" 540 RPM shaft. Of course it's not live. Keep exercising your forearms over the winter, they don't steer real easy and take a little room to turn at the end of the field. Other than that great fun to drive. There's nothing quite like plowing or discing at night & watching 8" of blue flame out of a 4" stack on the upgrade when she's pulling good. I don't seem to do real good at pulling, but I still have fun and have not been totally embarassed. Hope this helps, Paul

[Log in to Reply]  [No Email]
Paul from Michigan

06-06-2000 20:57:11




Report to Moderator
 Re: John Deere Model D's in reply to Greg H., 06-06-2000 13:06:39  
I'm still farming my few acres with a 1948 D. There was a hydraulic kit from Deere that could be installed by the dealer, maybe also could be ordered from the factory with it. It's the same Power Trol unit as the styled AR tractor with a pump mounted between the governor and the magneto. I have a similar setup on mine using a JD pump and aftermarket valve and reservoir. These seem to have been pretty popular, I see them on a lot of unrestored tractors. PTO shaft for a styled D is standard 1-3/8" 540 RPM shaft. Of course it's not live. Keep exercising your forearms over the winter, they don't steer real easy and take a little room to turn at the end of the field. Other than that great fun to drive. There's nothing quite like plowing or discing at night & watching 8" of blue flame out of a 4" stack on the upgrade when she's pulling good. I don't seem to do real good at pulling, but I still have fun and have not been totally embarassed. Hope this helps, Paul

[Log in to Reply]  [No Email]
Don Foster

06-06-2000 15:59:43




Report to Moderator
 Re: John Deere Model D's in reply to Greg H., 06-06-2000 13:06:39  
They were originally designed as wheatland tractors. I just acquired a dandy restored '29 model. Now I know why those old guys that drove them always say, Huh?" when you talk to them!!!! No muffler. But they made great improvements on them up until '54. Guess I'd rather have the age than the improvements.

PS: Electric start sure would be nice!!!!! !!!!



[Log in to Reply]  [No Email]
Greg H.

06-07-2000 05:40:52




Report to Moderator
 Re: Re: John Deere Model D's in reply to Don Foster, 06-06-2000 15:59:43  
Thanks for the input fellas. I don't know what it is about the Model D, I just think they are neat, and I hope to find a good one. Greg H.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy