Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

265 Clutch Removal

Welcome Guest, Log in or Register
Author 
Mike

11-03-2003 07:57:55




Report to Moderator

I am putting on a new drive belt on my Model 265 and have to remove the clutch to do so. Does any one have experience doing this? It seems to me that there is just one bolt holding it on but I cannot turn it without turning everything inside the engine. Is it standard right hand threads? Any suggestions? I don't want to mess everything up doing this. Thanks.




[Log in to Reply]   [No Email]
AJI

09-21-2004 15:12:42




Report to Moderator
 Re: 265 Clutch Removal in reply to Mike, 11-03-2003 07:57:55  
Mike;

I noticed that you were removing a clutch from a 265 John Deere. How did it go? I"m about to replace my belt am I"m told I have to remove the clutch to do so. I have the bolt off but don"t want to break anything at this point. Any help would be appreciated.

Thanks



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy