Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

1945 JD Power Lift

Welcome Guest, Log in or Register
Author 
JDRestorer

05-06-2008 13:26:17




Report to Moderator

Owners/Operators manual doesn't go into enough detail about the operating characteristics of the power lift on my 45 B. There are two pedals, located under and behind the seat, one left and one right. They both serve the same function as they are connected to the same rod. Two for operators preference I'm sure. Up is up. Question: Does down require the weight of an implement(I think yes) and does the lift have to go all the way down before in will come up again?

[Log in to Reply]   [No Email]
alabamafrog

05-07-2008 06:57:16




Report to Moderator
 Re: 1945 JD Power Lift in reply to JDRestorer, 05-06-2008 13:26:17  
On my 47 A there is one pedal and the pto has to be running for it to work, hit the pedal one time and it goes down, hit the pedal again and it goes up, it goes full stroke and will not stop in between. Its been a while but it does seem like it has to go full stroke before it will go the other way. We had a homemade 3pt hitch and a hay spear on it, used it for years to feed round hay in the winter.

[Log in to Reply]  [No Email]
RobMD

05-06-2008 13:41:05




Report to Moderator
 Re: 1945 JD Power Lift in reply to JDRestorer, 05-06-2008 13:26:17  
Q: does down require the weight of an implement?

A: Not really, there is an internal spring which is supposed to return the rockshaft to the down position. If it's sluggish going down, you can always use a crescent wrench and pull it down. There is a small arrow on the end of the rockshaft that will tell you whether it's up or down.

Q2: does lift have to go all the way down before it will come up again?

A2: Well, there's really no reason to ask this question since there is NO DOWN PRESSURE, but yes, I believe the pedal can be stomped at any time.

Keep in mind that both pedals are the same function, and that each stomp on the pedal will alternate back and forth between down and up.

[Log in to Reply]  [No Email]
45 JDB

05-07-2008 04:50:32




Report to Moderator
 John Deere Power Lift in reply to RobMD, 05-06-2008 13:41:05  
Do the pedals that operate the Power lift on an old B ALTERNATE between up and down each time you press them? Thanks in advance.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy