Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

830 Has lost its prime.

Welcome Guest, Log in or Register
Author 
Jeff in TX

05-05-2008 08:40:29




Report to Moderator

I have a 1974 830 with a 3-cyl diesel. Most of the time it turns about 3 times and starts right up. Here lately it will not start on less than 40 turns. I have had to pull start it a couple of times to get it going. It acts like it has lost its prime. What is the problem and what do I do to fix it. Thanks, Jeff




[Log in to Reply]   [No Email]
buickanddeere

05-09-2008 18:38:30




Report to Moderator
 Re: don't need to play it safe on this one in reply to Jeff in TX, 05-05-2008 08:40:29  
Thanks Tx Jim
It's a lesson I learned, better late than never to learn how to save a few tail feathers than loose them all.



[Log in to Reply]  [No Email]
buickanddeere

05-08-2008 06:06:16




Report to Moderator
 Re: don't need to play it safe on this one in reply to Jeff in TX, 05-05-2008 08:40:29  
I checked the JD parts site and you are correct the 830 versions of the utility tractors were never offered with the hydraulic high/low, rabbit/turtle, 16 speed.
Not that there has ever been any shortage of farmers dragging around a tractor with hydraulic clutch packs or requiring an engine driven lube pump. Until the transmission is ruined.
I should have checked instead of trusting my memory about the 830's with extra transmission speeds. There were Mannheim built 830's with a creeper range transmission. The hydraulic part was the independent pto.
It's a safe bet that there are people reading this who had no clue previously about pull starting and transmission damage.
The owner still needs a operators and service manual for this 830.

[Log in to Reply]  [No Email]
Tx Jim

05-09-2008 09:13:44




Report to Moderator
 Re: don't need to play it safe on this one in reply to buickanddeere, 05-08-2008 06:06:16  
buickandeere I never stated that an operators manual or tech manual was not needed. But every time I disagree with a statement made by you, somehow you always manage to divert to something else such as the manuals in this thread.

Have a nice day,Jim



[Log in to Reply]  [No Email]
Tx Jim

05-08-2008 05:05:20




Report to Moderator
 Re: don't need to play it safe on this one in reply to M w J, 05-05-2008 08:40:29  
buckanddeere
You asked if it had hyd. hi-lo! Jeff stated it had hi-lo which is actually range 1 and range 2 and nothing close to hydraulically operated and can be pulled started if need be. I stand on my statement that non of these model tractors came from factory with a HYD HI-LO. Tx Jim



[Log in to Reply]  [No Email]
Tx Jim

05-07-2008 03:27:42




Report to Moderator
 Re: 830 Has lost its prime. in reply to dubuqueJD, 05-05-2008 08:40:29  
Buickanddeere
Hyd hi-lo was not offered on a JD 3 cyl tractor so I think Jeff will be fine pull starting the tractor.



[Log in to Reply]  [No Email]
Jeff in TX

05-07-2008 04:50:58




Report to Moderator
 Re: 830 Has lost its prime. in reply to Tx Jim, 05-07-2008 03:27:42  

Tx Jim said: (quoted from post at 03:27:42 05/07/08) Buickanddeere
Hyd hi-lo was not offered on a JD 3 cyl tractor so I think Jeff will be fine pull starting the tractor.


Thats what I was thinking. I asked the guy that usually does all the work for me that I cant figure out, and he said it would be fine to pull start, just to be careful. I am going to get him to look at it as soon as he has a chance. Is there anything else I can do in the meantime to solve the problem? Thanks, Jeff

[Log in to Reply]  [No Email]
buickanddeere

05-06-2008 16:40:29




Report to Moderator
 Re: 830 Has lost its prime. in reply to Jeff in TX, 05-05-2008 08:40:29  
1-800-522-7448 quick and read it. You will be investing in a rebuilt high/low clutch pack very soon.



[Log in to Reply]  [No Email]
Jeff in TX

05-06-2008 19:48:50




Report to Moderator
 Re: 830 Has lost its prime. in reply to buickanddeere, 05-06-2008 16:40:29  
What the hell does the clutch have to do with it starting. I had a brand new clutch put in it when I bought it. It is working as it should and is still in new condition. The clutch has nothing to do with it. When you figure out what you are talking about, let me know.



[Log in to Reply]  [No Email]
buickanddeere

05-07-2008 06:01:05




Report to Moderator
 Re: 830 Has lost its prime. in reply to Jeff in TX, 05-06-2008 19:48:50  
Question :Does the tractor have the rabbit/turtle high/low hydraulic shift?

Answer: It does have high and low range gears.

Now after getting that reply for an answer. Wouldn't you play it safe and figure the tractor has the rabbit/turtle lever?

If he did have a tractor with the rabbit/turtle, he would have gone ahead and attempted to pull start it, not knowing any better.

If you want the correct answer you are going to have to give correct info.

Of course the dry drive clutch doesn't care about pull starts..... .....

[Log in to Reply]  [No Email]
Jeff in TX

05-07-2008 17:53:37




Report to Moderator
 Re: 830 Has lost its prime. in reply to buickanddeere, 05-07-2008 06:01:05  

buickanddeere said: (quoted from post at 06:01:05 05/07/08) Question :Does the tractor have the rabbit/turtle high/low hydraulic shift?
Answer: It does have high and low range gears.

Now after getting that reply for an answer. Wouldn't you play it safe and figure the tractor has the rabbit/turtle lever?

If he did have a tractor with the rabbit/turtle, he would have gone ahead and attempted to pull start it, not knowing any better.

If you want the correct answer you are going to have to give correct info.

Of course the dry drive clutch doesn't care about pull starts..... .....


Anyway, do you know how to fix the problem? I started it today several times with no problem. And no, it is not hydro shift/clutch. It is a regular 2 stage dry clutch.

[Log in to Reply]  [No Email]
Jeff in TX

05-06-2008 15:48:04




Report to Moderator
 Re: 830 Has lost its prime. in reply to Jeff in TX, 05-05-2008 08:40:29  
I have not changed the fuel filter yet. I have no idea how many hours are on the tractor. Most of the time it will start, but it take 4 or 5 tries letting it turn over several times each try. If I pull start it, I put it in 8th gear and pull it about 20 feet and it starts right up. Will start right up the rest if the day after that. If I let it sit overnight or a couple of days it acts like it doesnt want to start. It does have high and low range gears. I dont want to burn the starter up trying to get it to start. Other than that is runs very good and everything works as it should. I have had this tractor a little over a year and not had a problem until now. Thanks for the help. Any other ideas please let me know. Jeff

[Log in to Reply]  [No Email]
buickanddeere

05-06-2008 05:29:54




Report to Moderator
 Re: 830 Has lost its prime. in reply to Jeff in TX, 05-05-2008 08:40:29  
How far does the tractor have to be pulled before it starts?
Does the tractor have the rabbit/turtle high/low hydraulic shift?
That starter is going to fail soon if it's doing 40 engine rotations per try.



[Log in to Reply]  [No Email]
RobMD

05-05-2008 16:06:20




Report to Moderator
 Re: 830 Has lost its prime. in reply to Jeff in TX, 05-05-2008 08:40:29  
How many hours? Have you done any fuel filter replacement?



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy