Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Contacting John Deere

Welcome Guest, Log in or Register
Author 
Tommy Boy 2

03-24-2008 12:41:17




Report to Moderator

Does anyone know if i can send John Deere the serial number off of my tractor and they can give me some history. The tractor was bought from another state, I"m just looking for some info.




[Log in to Reply]   [No Email]
d. coleman

03-29-2008 09:53:32




Report to Moderator
 Re: Contacting John Deere in reply to Tommy Boy 2, 03-24-2008 12:41:17  
i thought there was a question fron tommy boy 2, but it looks like it was turned into a battle zone for fuedding responders.



[Log in to Reply]  [No Email]
Skyhawk Greg

03-27-2008 13:54:35




Report to Moderator
 Re: Contacting John Deere in reply to Tommy Boy 2, 03-24-2008 12:41:17  
You used to be able to send your tractor serial number to the JD Archive department, up until somewhere around mid year in 2000. They would then send to you, on John Deere letterhead, all the build date, ship date, destination, etc. information that they had on the machine. This was a completely free service. Shortly after this time, they stopped doing this. I never did figure out if Two Cylinder was the bad guy, in that they figured out a way to charge for what was free, or if Two Cylinder was the good guy for taking over where Deere left off.

[Log in to Reply]  [No Email]
jd b puller

03-26-2008 05:18:10




Report to Moderator
 Re: Contacting John Deere in reply to Gerald J., 03-24-2008 12:41:17  
Amen brother... :lol:



[Log in to Reply]  [No Email]
Alan Williamson

03-25-2008 07:08:13




Report to Moderator
 Re: Contacting John Deere in reply to Tommy Boy 2, 03-24-2008 12:41:17  
Go the internet and type in twocylinderclub. They can get you some information like several people had mentioned. There will be a charge for this and it will take 4 to 6 weeks.



[Log in to Reply]  [No Email]
jd b puller

03-24-2008 18:38:33




Report to Moderator
 Re: Contacting John Deere in reply to gumba, 03-24-2008 12:41:17  
Try posting your complete serial number.



[Log in to Reply]  [No Email]
J.R. Hobbs

03-25-2008 11:00:21




Report to Moderator
 Re: Contacting John Deere in reply to jd b puller, 03-24-2008 18:38:33  
Why would he want to post his complete serial number on a public website with all the stuff that goes on? A JD dealer may be able to trace a 4640, but if not, the Two-Cylinder Club can do a serial number search on it and provide build date, ship date,original shipping destination, and some other information. Please tell me how you think posting his complete serial number here could be of help to him, I would really like to know.

[Log in to Reply]  [No Email]
jd b puller

03-25-2008 18:04:25




Report to Moderator
 Re: Contacting John Deere in reply to J.R. Hobbs, 03-25-2008 11:00:21  
JR, Glad to see your pi$$poor attitude is back. I used to think the bad attitude of "Mr. Thinker" section in the Green Magazine was just a gimmick, but over the past few weeks I've seen what a true arse you really are. I don't play on the bashing boards but I've seen some of your posts, and frankly even I am appalled.

Anyway, getting to the point of posting the Serial number, which was beaten to death several months ago. It's not his SS #.

There are several members of this forum who work for JD dealers who can look the thing up for him. In some cases, they can even tell you machine history including previous and original owners.

Please go back wherever you came from unless you can contribute something worthwhile - That inlcudes Raddlechain, 45EB, 4020LP, and Mr. Thinker. I know there's a lot of knowledge in that thick skull of yours, now if you could just find a friendly way to release it we'd all have a lot to learn.

[Log in to Reply]  [No Email]
J.R. Hobbs

03-25-2008 21:14:39




Report to Moderator
 Re: Contacting John Deere in reply to jd b puller, 03-25-2008 18:04:25  
My concern is that given the number of scam artists that infest the internet these days, posting a complete serial number of a tractor is a somewhat risky business. If you choose to believe that I was being sarcastic, I can't help if that's how you perceive it, but it's not how it was meant. I've never seen a JD dealer or employee come on here and give out the history of any machine. I'm sorry if you don't like my presence here, you can always contact the moderator and see if you can have me removed, if you believe that should happen.

[Log in to Reply]  [No Email]
jd b puller

03-25-2008 22:00:45




Report to Moderator
 Re: Contacting John Deere in reply to J.R. Hobbs, 03-25-2008 21:14:39  
JR, Yes, you did appear to be sarcastic to me. I like your knowledge and would hate to see you leave or be removed, You could be one of the most popular and respected guys on here if you just treated people with a little respect. I do commend you on explaining your position though (I don't agree with you, but that's fine). Thanks,



[Log in to Reply]  [No Email]
J.R. Hobbs

03-26-2008 05:11:20




Report to Moderator
 Re: Contacting John Deere in reply to jd b puller, 03-25-2008 22:00:45  
That's one of the problems with this form of communication---what the poster says and how he says it are subject to interpretation, and so much of that depends on mood, whether you like someone or not, a whole bunch of factors. I'll leave it this way---if I intended to to be sarcastic, NOBODY would have any doubts as to my intentions. As it was, I was merely trying to protect someone from being rooked by a scam artist, because if you have a serial number----you can do a lot of things. I'm sorry that you misinterpreted my intent, but I'm not angry about it, those things happen. No harm, no foul, let's move on.

[Log in to Reply]  [No Email]
buickanddeere

03-26-2008 03:26:15




Report to Moderator
 calling a spade a spade Contacting John Deere in reply to jd b puller, 03-25-2008 22:00:45  
Pbbrowning & jd b puller. When it comes to the statement "there are no stupid questions". I believed that until reading some of the asinine questions and wild hare statements on this board. Some of the miss-spelled inquiries must be from redneck inbred back woods near illiterates. Who don't have a clue about the basic laws of physics, metallurgy or chemistry. They have money for smokes, beer and big tires for their 4X4 to park nest to their trailer. Why can't they find money for a service manual that has the answers and specs? Why do they feel entitled for endless free advice that would cost hundreds of $$$ per hour from engineers in the business world. These drooling buck toothed mouth breathers also hold fast to some 90% untrue "old wives tale" that their dear old Pappy told them. No matter what the facts actually are. Well yes I do believe that "Mr Thinker/J.R. is allowed to give some dolt's "chain a yank" from time to time. For wasting his and everybody else's time. Some people can calmly and politely suffer fools for years. Even the patient and brilliant Clonney was finally worn down by the untiring forces of endless fools. A terrible loss for this and other site(s). Clooney's gone but we still have JR. Even think JR and some others have lasted because they do "vent pressure" every now and again?

[Log in to Reply]  [No Email]
PBrowning

03-25-2008 16:35:48




Report to Moderator
 Re: Contacting John Deere in reply to J.R. Hobbs, 03-25-2008 11:00:21  
I see you are back -- with the same scarcasm as before. Your post serves no one but you. (PatB)



[Log in to Reply]  [No Email]
J.R. Hobbs

03-25-2008 21:08:41




Report to Moderator
 Re: Contacting John Deere in reply to PBrowning, 03-25-2008 16:35:48  
Tell me, Mr. Browning, what was sarcastic about asking someone what the point would be about posting a complete serial number? Given the number of scam artists that abound on the Internet these days, posting a complete serial number seems to me to be a not very bright thing to do, but I guess we disagree about that. You're seeing something that wasn't intended to be, but that's your problem, not mine.

[Log in to Reply]  [No Email]
the real thing?

03-25-2008 16:53:07




Report to Moderator
 Re: Contacting John Deere in reply to PBrowning, 03-25-2008 16:35:48  
are you sure it's the "real" Hobbs? No password is used.



[Log in to Reply]  [No Email]
PBrowning

03-25-2008 17:27:09




Report to Moderator
 Re: Contacting John Deere in reply to the real thing?, 03-25-2008 16:53:07  
Oh it the real one -- ISP 12.216.219.16 -- formerly "4020LP" and "raddlechain" after that! (PatB)



[Log in to Reply]  [No Email]
The JD Workmen

03-24-2008 13:14:27




Report to Moderator
 Re: Contacting John Deere in reply to Tommy Boy 2, 03-24-2008 12:41:17  
The Two Cylinder Club Can do Tractor Serial Number Researches for you on most older tractors.



[Log in to Reply]  [No Email]
Mike M

03-24-2008 13:12:39




Report to Moderator
 Re: Contacting John Deere in reply to Tommy Boy 2, 03-24-2008 12:41:17  
WHAT TRACTOR model ? On some of the newer stuff any dealer can pull it up on a computer.

On the old stuff you have to go through the 2 cyl. club and then about all you get is a build or ship date.



[Log in to Reply]  [No Email]
J.R. Hobbs

03-24-2008 14:01:29




Report to Moderator
 Re: Contacting John Deere in reply to Mike M, 03-24-2008 13:12:39  
You're being more than a little misleading with that statement. Yes, beginning in May, 1950, on Waterloo-built models, all that is recorded is build date, ship date, chassis/fuel type, and destination. Prior to that, there is quite a bit of information available. Most of the Dubuque tractors that there are records for give a complete list of the equipment the tractor was built with, but no shipping destinations were recorded. Beginning with the New Generation Tractors, the only information available is ship date, fuel/chassis type, and shipping destination. Which is a lot more information that you can get, say, from any other tractor company.

[Log in to Reply]  [No Email]
PBrowning

03-25-2008 16:41:42




Report to Moderator
 Re: Contacting John Deere in reply to J.R. Hobbs, 03-24-2008 14:01:29  
Before you down-talk other tractor makers, you should be informed that JD-M records at the Dubuque plant were far from perfect! One fellow I know sought a Production Record for his 1948 "M" and was informed by Two-Cylinder that they did not have that data on his tractor. (PatB)



[Log in to Reply]  [No Email]
J.R. Hobbs

03-25-2008 21:18:03




Report to Moderator
 Re: Contacting John Deere in reply to PBrowning, 03-25-2008 16:41:42  
Yes, Pat, I am acutely aware that the serial number records for the Model "M" do not exist from 1947 until early 1952. I admitted I made a mistake, and apologized for it. I'm sorry you don't like my presence here, but unlike yourself, I'm not posting a link to a commercial website with every post I make, so be careful about the pot calling the kettle black.



[Log in to Reply]  [No Email]
Handsome Jim

03-25-2008 19:06:05




Report to Moderator
 Re: Contacting John Deere in reply to PBrowning, 03-25-2008 16:41:42  
I've seen you put guys down worse than that for a lot less Pat.



[Log in to Reply]  [No Email]
PBrowning

03-25-2008 21:01:12




Report to Moderator
 Re: Contacting John Deere in reply to Handsome Jim, 03-25-2008 19:06:05  
I know -- I just feel a man should keep his word, especially after making such a big deal of signing off, and getting everyone irritated about it -- but as you imply -- it IS a free world. Thanks (PatB)



[Log in to Reply]  [No Email]
J.R. Hobbs

03-26-2008 05:16:19




Report to Moderator
 Re: Contacting John Deere in reply to PBrowning, 03-25-2008 21:01:12  
Pat, if you don't like my presence here, then complain to Kim, and see if you can have me removed. I changed my mind after quite a number of people contacted me in hopes that I would. Changing one's mind is permissible, last time I checked. I'll be using my own name, so you'll not have to wonder who it is. And, I won't be posting a link to a commercial website, such as you do with almost every post you make, in an effort to sell your wares without spending any money. So, don't even think about lecturing me concerning ethics.

[Log in to Reply]  [No Email]
jdputtputt

03-25-2008 13:49:46




Report to Moderator
 Re: Contacting John Deere in reply to J.R. Hobbs, 03-24-2008 14:01:29  
You need to collect other brands before you make a statement about what is available...on MM and Oliver stuff I can get the actual build cards which I have done and it is very complete right down to hitch type, tires, shipping destination....Thank You VERY much !



[Log in to Reply]  [No Email]
buickanddeere

03-25-2008 16:56:57




Report to Moderator
 Re: Contacting John Deere in reply to jdputtputt, 03-25-2008 13:49:46  
Hart Parr, Minnie, Oliver, Cockshutt and White were/are all the one and same company. How about all the others such as Case, IH, Massey, Ford, Harris, Ferguson, Leland, Same, Duetz, Yanmar, David Brown etc?



[Log in to Reply]  [No Email]
WeirdDeere

03-25-2008 23:58:53




Report to Moderator
 Re: Contacting John Deere in reply to buickanddeere, 03-25-2008 16:56:57  
Case also had build cards for all their tractors. Some have been lost, but I think most of the antique ones are in the hands of one or two collectors. Look around on the Case board and you might see it mentioned once and a while.

Note, I said Case, and not Case/IH. I don't know about after the merger.

Brandon



[Log in to Reply]  [No Email]
J.R. Hobbs

03-25-2008 15:16:43




Report to Moderator
 Re: Contacting John Deere in reply to jdputtputt, 03-25-2008 13:49:46  
My bad, I stand corrected. Learn something new every day.



[Log in to Reply]  [No Email]
Tommy Boy 2

03-24-2008 13:45:49




Report to Moderator
 Re: Contacting John Deere in reply to Mike M, 03-24-2008 13:12:39  
It is a John Deere 4640



[Log in to Reply]  [No Email]
patsdeere

03-24-2008 13:09:36




Report to Moderator
 Re: Contacting John Deere in reply to Tommy Boy 2, 03-24-2008 12:41:17  
I know that a club (don't remember which one, but you can search the archives) can look up the number and tell you about it. I don't know what models they cover, but I know they have a bunch of the old ones.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy