Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

hood removal

Welcome Guest, Log in or Register
Author 
Big Bug Creek

03-06-2008 09:30:28




Report to Moderator

have a 1945 john deere model b. what is the best way to remove hood with steering column running thru the hood?




[Log in to Reply]   [No Email]
DickD

03-06-2008 18:22:18




Report to Moderator
 Re: hood removal in reply to Big Bug Creek, 03-06-2008 09:30:28  
Andy pretty much told you the straight of it. The only thing I would add is, I always take the tank off with the hood as those darn tank brackets can be a b---- to get back on and tight.



[Log in to Reply]  [No Email]
Andy Motteberg

03-06-2008 12:55:11




Report to Moderator
 Re: hood removal in reply to Big Bug Creek, 03-06-2008 09:30:28  
You cannot remove the hood with the steering shaft in the hood. The shaft must be removed. Remove the steering wheel, front medallion, the and the steering shaft bearing cap. Be sure to catch the bearings and turn the shaft out. Then unbolt all the hood mounting bolts and anything that is in the way to remove the hood and pull it off.



[Log in to Reply]  [No Email]
PBrowning

03-06-2008 09:49:04




Report to Moderator
 Re: hood removal in reply to Big Bug Creek, 03-06-2008 09:30:28  
It can't be done!

You must first remove the steering worm shaft. If you are new to Deere tractors, or if (at least) this tractor is new to you, I strongly urge you acquire the operators manual, parts catalog and a service manual before tearing into the tractor. You will definitely be on firmer ground all the way.

To determine what Deere publications are available for yor tractor, go to the JD-H Restoration Site (below), scan across to ARTICLES 1. From the drop-downs, select DEERE PUBS. Once there, page two will reveal the manual part numbers, and at the bottom of page 1 are instructions for obtaining them. Be sure to check out all four pages -- great information there as relates to tractor manuals you will need.

Once again, if you are new to Deere -- Welcome aboard to Green Land! (PatB)

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy