Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

What have you guys been tinkering with ?

Welcome Guest, Log in or Register
Author 
THE SMOOTHED DE

02-21-2008 15:58:46




Report to Moderator

What other projects is everyone doing this late winter ? We have done alot of interior work on our house . My visits to the garage come with glances over at Deere's patiently awaiting to be cranked up and driven. Come on warmer weather so we can get the antique tractor season going ! Anybody working on a tractor thats not a John Deere ? Variety pack collectors ?




[Log in to Reply]   [No Email]
Roy Lemmond

02-29-2008 18:38:32




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
I have been trying to adjust the clutch on my JD B 49 model. I am sure that I put the shifting fork in the correct slot, but it won't release the gears. Any help will be appreciated.



[Log in to Reply]  [No Email]
Pitalplace

02-26-2008 15:34:14




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to TylerARK, 02-21-2008 15:58:46  
My prayer is that I will have enough projects to make it to dead. That way I should never be bored. :lol:



[Log in to Reply]  [No Email]
Tom New Jersey

02-26-2008 15:03:14




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
1936 unstyled A, but I had to quit my feet won't stand the cold. Hope spring gets here early....



[Log in to Reply]  [No Email]
Matt L

02-26-2008 14:40:06




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
Im still working on my ferguson To30.... been 2 years and like 5k later but im working on it again. :lol:
I should be spending time on my jd 50 - but is under 3 feet of snow yet ( tarped)

Then theres the '37 B needs head work that I know of and a carb job

The '48 A high crop - needs who knows what to run again



projects - to many..... lol



I should Work on the moline uts instead of the ferg i think

[Log in to Reply]  [No Email]
Sorno

02-25-2008 08:27:18




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
My father and I are working on a 70G with a stuck engine. We picked it up for a song and the sheet metal was in great shape. It also has a factory JD wide front and the 800 hitch on it complete. We have both messed with a few tractors but this is by far the furthest we have been into one. We ended up taking the block out with the pistons still stuck. After a month of sitting with different penetration fluids on the holes It still didn't come loose. We has to you the old oak 4x4 and BFH method. :lol:

[Log in to Reply]  [No Email]
Damp;Dservice

02-24-2008 17:54:58




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
finished the 49 LA, working on a farmall H and this JD R, Need the R for pulling in June, never have pulled a tractor before so looking forward to starting out with this R, after its done of course!

[IMG]httpimg142.imageshack.us/img142/3603/002vm7.jpg[/IMG]

third party image

third party image

[Log in to Reply]  [No Email]
greenmisterg

02-24-2008 14:21:46




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
Trying to finish my 1951 G...hope to have a few pictures of it..waited 50 years to get it!!



[Log in to Reply]  [No Email]
jd b puller

02-23-2008 10:21:53




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
[quote="Mike M"](reply to post at 08:43:35 02/22/08) [/My replacement is a metal gear. I don't know what they could of been thinking when they made them with plastic ? Trying to build it defects ??? GM tried it on cars years back with the same BAD results !quote]

Mike, people complained about the noise. The plastic cam gear made them quieter. In your case it made them REAL quiet.



[Log in to Reply]  [No Email]
Pitalplace

02-23-2008 06:06:13




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to Scott's B haven, 02-21-2008 15:58:46  
The 4B is a cylinder sheller I believe and I am looking for a spring sheller. It's like the number one's and two's only much bigger. It would look like this:

third party image



[Log in to Reply]  [No Email]
RLA

02-22-2008 14:10:56




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
Re ringing a 1960 630 , man is this metal Cold!

Replacing some gauges & Power steering hose, & muffler bracket on a 530. Once this is done will be time to focus on all over paint. Most everything is ready for paint, the except weather...



[Log in to Reply]  [No Email]
Geoff Mathews

02-22-2008 11:09:38




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
The bleed screw on the injector pump of my 1952 Fowler bull dozer fitted with Marshall single cylider 2 cycle diesel is buat. I am trying to fix it. My JD stuff does not need fixing.



[Log in to Reply]  [No Email]
donwisc

02-22-2008 09:47:03




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
Just bought a JD 290 corn planter. Good shape but needs the Fertilizer hoppers and feeder. Any body have 2 let me know. Will also consider rebuildable ones too. Will use it for food plots for Deer up in northern wisc.



[Log in to Reply]  [No Email]
jjas

02-22-2008 09:37:04




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
Pulling an 18hp wisconsin off a heckendorn mower and replacing it with a 27hp liquid cooled kawasaki. zoom zoom. Then start on making a buzz saw to fit the front of my wd6 that will work as a chop saw instead of a moving table type saw.



[Log in to Reply]  [No Email]
Pitalplace

02-22-2008 09:07:36




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
I have found another John Deere sheller. It is a D400 a #4 spring sheller and now I am trying to locate another machine for parts. Haven't been in the shop much due to the cold weather but do have the bug. Anyone with a old John Deere sheller in the weeds please contact me. :D



[Log in to Reply]  [No Email]
JD sheller

02-23-2008 05:46:46




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to Pitalplace, 02-22-2008 09:07:36  
i have a 4-B sheller is that what you are looking for?



[Log in to Reply]  [No Email]
John Jenkins

02-22-2008 09:08:06




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
Not tractors but I just put a new piston, rings, stainless valves, keepers and springs in my �05 Honda CRF250R. Very simple to work on and it now runs like a scalded ape. On deck: my 4020, 4010, 4430 and 4440 need paint, TLC, etc. I�m considering letting go of my two 6030s and they could use a little cleaning up. That should keep me out of trouble for a bit!



[Log in to Reply]  [No Email]
CarlF

02-22-2008 08:56:10




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
working on a 64 1010 special. when it gets warm i plan on finishing the paint and then it should be done.



[Log in to Reply]  [No Email]
Jim in Ma.

02-22-2008 06:53:55




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
Considering that my "3 season Shop" is closed, I have been stocking up on parts for my 41 JD B. I also picked up another Farmall Cub w/parts missing and trying to decide if I should rebuild it or save it for parts. Oh-ya trying to keep warm, have burned about 5 cords of wood.



[Log in to Reply]  [No Email]
Regan

02-22-2008 06:39:25




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
My 3010 has been waiting patiently since last year to get put back together. Finished the front end last fall. New front rims and tires, rad repaired front axle overhauled, hyd pump,24-12v conversion,pump coupler, etc. etc. Got all the parts needed - new fenders,side panels,3pt. lift arms, pto cover,all gauges,steering wheel, etc. Going to order an inframe kit yet. Hopefully I"ll get at it and finish it before spring. Had lots of fun so far. I used to work for a JD dealer years ago in the seventys. Just like old home week!

[Log in to Reply]  [No Email]
wijim

02-22-2008 06:33:17




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
im working on a 46A. the oil pump drive coupler broke and my dad kept on runing her you now the rest of the story!



[Log in to Reply]  [No Email]
n29we

02-22-2008 04:11:05




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
Just finished my 43 LI project and just started a 31 GPWT project. The GPWT is loose, just waiting for the carb and mag to be redone and I'll try an fire her up. That will keep me busy for most of the remaining winter. JimO



[Log in to Reply]  [No Email]
ram ranch

02-21-2008 20:48:39




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
Working on a 41 D for a customers, just got back from the blaster, my 35 unstyled A, getting the front end done and ready to paint, a B that�s taking up shop space( a friends project) also an H with a bad head, I�m waiting on the machine shop. And a 430 tricycle that is a customers. And a 4430 waiting for an engine transplant before the first pull of this year. Also a B and a 60 the next town over for a customer�s (I have torn apart in their shop) did I mention I also milk cows twice a day? Hey it�s only February. I haven�t even thought about spring yet!!!

[Log in to Reply]  [No Email]
Mike M

02-21-2008 18:18:04




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
Picked up a JD 445 garden tractor with mower and loader that had a cam gear gone bad. Working on putting it back together. $345.00 in Kawasaki Engine parts so far. Will likely sell it in the spring. Or try to ? LOL



[Log in to Reply]  [No Email]
wilamayb

02-21-2008 19:05:58




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to Mike M, 02-21-2008 18:18:04  
Those Kawasaki's with the plastic cam gear were good until the plastic gear went. LOL! I guess it seems that most of the replacement gears are metal, although some are still that silly plastic.



[Log in to Reply]  [No Email]
Mike M

02-22-2008 04:43:35




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to wilamayb, 02-21-2008 19:05:58  
My replacement is a metal gear. I don't know what they could of been thinking when they made them with plastic ? Trying to build it defects ??? GM tried it on cars years back with the same BAD results !



[Log in to Reply]  [No Email]
jdal

02-21-2008 17:39:21




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
Working on '29 GP that my brother found for me last year. She'll run but I had to belt crank using my '43 LA. Will need to free up governor as she wants to run wide open. Going to leave rear on steel but undecided on front as it has cut-offs but the rims are poor. Need fuel tank if anyone has one.



[Log in to Reply]  [No Email]
Wayne_H

02-21-2008 16:30:07




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to THE SMOOTHED DEERES, 02-21-2008 15:58:46  
third party image

Actually, my 48 B project is coming along well. Although.... while chasing some thread holes with my tap, I ran into a blocked hole.... after inspection I found a very old tap broken off in it... I bent my wilton tap extractors about five times and no progress, then I ended up grinding the broken tap out with my dremel tool (and 8 grinding tips later) and finally installing a helicoil to make it better than new. Wow, that was a lot of work for one hole!

Wayne

[Log in to Reply]  [No Email]
almrm

02-22-2008 05:46:12




Report to Moderator
 Re: What have you guys been tinkering with ? in reply to Wayne_H, 02-21-2008 16:30:07  
Wayne,

That is a nice looking repair. Is thread lock or anything required on the outside of the heli coil? Will it stay in place when you remove the bolt down the road? I foolishly drilled my 5/16 sheet metal fastener holes to 3/8 back in the early 80s. They work fine but I cannot ust the original clutch head type fasteners. A repair like yours would work great. BTW I see replacement clutch head fasteners that also have hex heads and some that have just a smooth button head. The remaining originals on my tractor were smooth. Did they use clutch type hex heads in production on the A and B models? Later models? Just curious.

I am working on a 50 A that was very weathered and picked apart when I started. It also had a John Deere LP conversion on it. It will be reincarnated as an all gas model as it was originally. I am buying parts on ebay for it. Two complete late A tractors were recently parted out. Either one of them were far better than mine when I started. One of them was running and the parts look very good. No issues, this is part of what supports our hobby. At least they did not get melted to make KIAs.

Mark

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy