Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

John Deere 1020 Orchard Fenders what do they also fit?

Welcome Guest, Log in or Register
Author 
big Ted

02-16-2008 13:31:55




Report to Moderator

Hello I just picked up a very nice set of rear John Deere 1020 Orchard Fenders and I was wondering what other model JD tractors would they fit. these cover the rear tire only.they were taken off of the tractor many years ago and placed in a shed. what value are the too? Thanks




[Log in to Reply]   [No Email]
duffer

02-17-2008 07:38:36




Report to Moderator
 Re: John Deere 1020 Orchard Fenders what do they also fit? in reply to big Ted, 02-16-2008 13:31:55  
I just wanted to add a reply. I also have a 1020 tractor like Bob has pictured. I was lucky enough to get a parts catalog and teck manual off ebay. The fenders on Bob's and my tractor appear
to be called low profile fenders. The fenders that big Ted has shown are very close to the orchard fenders in my book, but the parts book shows the outside skirt as a separate part held on by 4 bolts. The bracket that bolts to the axle is also a separate part. There could also be a rear guard bracket on each fender for the rear light. Ted's fender looks like it could be one piece. As much as I know . Thanks

[Log in to Reply]  [No Email]
Bob Gauntt

02-16-2008 15:26:21




Report to Moderator
 Re: John Deere 1020 Orchard Fenders what do they also fit? in reply to big Ted, 02-16-2008 13:31:55  
third party image

The article I read on the JD 1020 Orchard stated that the fenders were also used on some of the JD 2020 models. I posted a picture of my JD 1020 Orchard in the photo section so you can see the fenders.



[Log in to Reply]  [No Email]
big Ted

02-16-2008 20:36:57




Report to Moderator
 Re: John Deere 1020 Orchard Fenders what do they also fit? in reply to Bob Gauntt, 02-16-2008 15:26:21  
third party image

here is whaat i have. hope the picture comes though.



[Log in to Reply]  [No Email]
Rome

02-17-2008 09:19:11




Report to Moderator
 Re: John Deere 1020 Orchard Fenders what do they also fit? in reply to big Ted, 02-16-2008 20:36:57  
I have a J.D. 1010 grove and orchard tractor, and the fenders in your photos look alot like mine. Not many around and hard to find. What width are they, as there were two widths available according to sales brochures ? No information that I have shows that J.D. ever built a 2010 orchard, so these may be exclusive to the 1010. Not to say they would not fit something else, though.



[Log in to Reply]  [No Email]
big Ted

02-17-2008 12:03:21




Report to Moderator
 Re: John Deere 1020 Orchard Fenders what do they also fit? in reply to Rome, 02-17-2008 09:19:11  
Hello

I went out and measured them and they are about 23 inches wide to the outsides. I checked the 1010 parts book, in the front they show a picture of two sides of the tractor, one has the bolt on outer sides and the other are like these one piece fenders.. then i went to the back and all they showed is a break down on the one with removeable sides...Thanks for all your help guys!!!



[Log in to Reply]  [No Email]
Rome

02-17-2008 15:31:02




Report to Moderator
 Re: John Deere 1020 Orchard Fenders what do they also fit? in reply to big Ted, 02-17-2008 12:03:21  
My fenders have removable fender skirts and I'll have to measure the width, but it seems like they are about the same as yours. Havn't been able to find out what the other width dimension was. I have also seen aftermarket fenders available that look alot like mine and will fit other models, also. You should be able to find a home for these pretty easily.



[Log in to Reply]  [No Email]
big Ted

02-17-2008 15:58:44




Report to Moderator
 Re: John Deere 1020 Orchard Fenders what do they also fit? in reply to Rome, 02-17-2008 15:31:02  
Thanks there are other picture of the fenders on E-bay item 200200795496 Thanks Ted



[Log in to Reply]  [No Email]
raddlechain

02-17-2008 16:04:05




Report to Moderator
 Re: John Deere 1020 Orchard Fenders what do they also fit? in reply to big Ted, 02-17-2008 15:58:44  
I'm sorry that you picked such a poor place such as flea-bay to sell them, whatever they fit. You'd have done far better in one of the JD magazines, these are rare pieces.



[Log in to Reply]  [No Email]
big Ted

02-17-2008 18:24:13




Report to Moderator
 Re: John Deere 1020 Orchard Fenders what do they also fit? in reply to raddlechain, 02-17-2008 16:04:05  
I believe that there are lots of good quality people on the internet, wether it is E-bay or on this fine site. and I don't mind the auction part of it. the people will determine the price of the item. kind of hard to find market price of an item through a magazine. are they worth $50.00 or $500.00 if you set the price too low you'll have a hundred calls and would be kicking yourself for selling too cheap.. anyway thanks for your input

[Log in to Reply]  [No Email]
Bob Gauntt

02-16-2008 21:02:56




Report to Moderator
 Re: John Deere 1020 Orchard Fenders what do they also fit? in reply to big Ted, 02-16-2008 20:36:57  
They are definitely JD 1010 Orchard fenders, could also possibly fit the 2010 Orchard



[Log in to Reply]  [No Email]
raddlechain

02-16-2008 23:01:00




Report to Moderator
 Re: John Deere 1020 Orchard Fenders what do they also fit? in reply to Bob Gauntt, 02-16-2008 21:02:56  
Are you sure? Not saying you are wrong because you could well be right, but there were a type of 1020/2020 Orchard fenders before the style that is on the 1020 that is pictured. I'm without my parts catalogs, but while these could be the 1010 Orchard fenders, these could be also the first-design 1020/2020 Orchard fenders. Please, can someone with a 1020 Parts Catalog take a look? Whichever they are, they are rare parts.

[Log in to Reply]  [No Email]
Ten-Twenty

02-17-2008 05:15:35




Report to Moderator
 Re: John Deere 1020 Orchard Fenders what do they also fit? in reply to raddlechain, 02-16-2008 23:01:00  
If the illustration in my 1020 parts catalog is accurate, these do not appear to be the early 1020 Orchard fenders.



[Log in to Reply]  [No Email]
big Ted

02-16-2008 20:42:28




Report to Moderator
 Re: John Deere 1020 Orchard Fenders what do they also fit? in reply to big Ted, 02-16-2008 20:36:57  
third party image

i



[Log in to Reply]  [No Email]
raddlechain

02-16-2008 14:20:01




Report to Moderator
 Re: John Deere 1020 Orchard Fenders what do they also fit? in reply to big Ted, 02-16-2008 13:31:55  
Without looking it up, they should also fit the 1520 and 2020 Tractors. Run an ad in the tractor magazines, you won't have them long, people are looking for these. Can't say as to price, as they change hands so seldom that no price has really been established, but you have VERY good property there. Do yourself a favor and don't screw around with putting them on flea-bay or the internet sites---either one of the two JD magazines is the way to go, because the really serious collectors read them.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy