Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

80/820 Shifter Quadrant

Welcome Guest, Log in or Register
Author 
toolz

02-15-2008 23:12:41




Report to Moderator

I need a shifter quadrant for my 820. I am hopefully buying one off an 80 from a gentleman here on the board, and am wondering if it will fit. The part number is different, but all related parts are the same. I'm going to try it, but does anyone know the difference? Thanks- toolz




[Log in to Reply]   [No Email]
toolz

02-17-2008 11:25:25




Report to Moderator
 Re: 80/820 Shifter Quadrant in reply to toolz, 02-15-2008 23:12:41  
What possible reason would you have for wasting your time posting a comment like that? The tractor is already parted, and I would like to buy that part. You have a problem with that? If you are not interested in helping, please stay away from my posts.



[Log in to Reply]  [No Email]
buickanddeere

02-17-2008 18:32:12




Report to Moderator
 Re: 80/820 Shifter Quadrant in reply to toolz, 02-17-2008 11:25:25  
Why so touchy? You were not being insulted. Although after your response I'm getting tempted.



[Log in to Reply]  [No Email]
toolz

02-17-2008 21:10:12




Report to Moderator
 Re: 80/820 Shifter Quadrant in reply to buickanddeere, 02-17-2008 18:32:12  
Bring it on, Moron.



[Log in to Reply]  [No Email]
buickanddeere

02-18-2008 09:28:49




Report to Moderator
 Re: 80/820 Shifter Quadrant in reply to toolz, 02-17-2008 21:10:12  
Judging by your defense reflex, the practiced response and vigor with which it's delivered. You have been scolded for being foolish most of your youth by a frustrated parent. Now the in adulthood when you have control of those weaker than yourself in person. Or when protected by the anonymity of the internet. You lash out with a defensive blast of wrath to both protect yourself. And to vent those years of suppressed anger. The good news is there is help available for you at low cost to no cost from public mental health offices of your locate, state or federal government. Please for the sake of your family and yourself ,its a small price to pay for many years of happier living. Best of all this syndrome won't be passed onto the generation. Please for the sake of your children, grandchildren etc. If you would take notice. Quote " Parting out a semi rare 80 for a dime a dozen 820?" Unquote. There is no mention of your being foolish because Quote. " from an 80 from a gentleman here on the board". Unquote. Where pray tell is there a message saying you are a dolt?

[Log in to Reply]  [No Email]
toolz

02-19-2008 00:06:38




Report to Moderator
 Re: 80/820 Shifter Quadrant in reply to buickanddeere, 02-18-2008 09:28:49  
Wow! All that from my few words here. You are not only a brilliant psyco-analyst, but a psychic also! I'm not quite that good (who is?) or quite that smart (who could be?), but I do have a few observations about you.

1) You're retired
2) You have too much time on your hands
3) You have no friends
4) You have no life
5) You have to put down other's possesions to make yourself feel more substantial

Your many unavoidable responses to questions on this forum have proven to me that you have no real knowledge of anything, but you are a master of the obvious.

This forum exists for enthusiasts to exchange helpful information to further the hobby. This is something you apparently don't or can't understand. There is no need here for your smart-a$$ comments, putdowns, and generally worthless replys. You have done this more than once to me, and countless times to others. If you do not have a constructive comment, please do everyone a favor, and shut off your computer.

By the way- the relative rarity of my 820 is of no concern to me. I have a number of tractors, some rare, some not. I buy what I like, not what someone else likes or thinks I should have. The aformentioned gentleman who parted his 80 did not do it to make my 820 live. I know that's hard for you to understand, but if none ever get parted, then many will never run again. Deal with it.

Sorry my response wasn't as eloquent as yours- I just don't have all day to lurk on this board.

Grow up. Get a life. Have a nice day.

[Log in to Reply]  [No Email]
buickanddeere

02-20-2008 07:19:16




Report to Moderator
 Re: 80/820 Shifter Quadrant in reply to toolz, 02-19-2008 00:06:38  
As for the cliche " dime a dozen". After re-reading the response.That was not the best term to have used. And for that I apologize. The phrase could possibly infer that your 820 was of little consequence.Not my intention. The green dash is a 80 by another name. And the 820 blackdash is a fine beast indeed. An 830 without the high price tag or rarer sheet metal. The intention was only that "that the 80 was less common than the 820". Not to belittle your 820.I would go so far as to state that for myself. I would prefer a black dash 820 to an 830. I happen to be in the market of a tired but mechanically complete 820 blackdash. I need more parts to continue the restoration of both my 1960 840 prototype and the 1961 model 840. I read here on ytmag one time of some old coot that parted a 330 to repair his M. One has to cringe at the thought. As per Mother Deere's CD DB1293, section PC0766. Parts manual for the 80,820,830 & 830Industrial. Page #103/45-2 item #20, Arm Gear Shifter, part number R512R pre serial number 8199999. Changes to part# R1955R at serial number 8200000. Page 104/45-3 with all the shifter rails, pawls, rails,plates, yokes, shafts, retainers etc. Are all identical from the earliest 80 to the latest 830/830I.So swap away at your heart's content. So yes the 80 donor has everything you need to restore your 820. I'm not retired but sometimes during assignment coordination. There are hours of time to kill while at work on the computer. As for some of the responses. Some questions here are of the most dopey brain dead variety. Those questions that could be answered with a high school education of math/physics/basic chemistry. Or with a parts manual that costs about the same a couple bottles of good booze or a few cartions of smokes. They will continue to get snide replies. "here's your sign" for another cliche. As for being nasty. If someone proves themselves to be an idiot with not intention of bettering them self. I have no problem with giving them a good swift kick in the backside. For those of use who know they have all fallen short of the mark and try to improve. No shortage of forgiveness for those persons. I do still believe you are scarred from some unfortunate childhood experiences and are still with holding "pressure".

[Log in to Reply]  [No Email]
buickanddeere

02-17-2008 07:02:22




Report to Moderator
 Re: 80/820 Shifter Quadrant in reply to toolz, 02-15-2008 23:12:41  
Parting out a semi rare 80 for a dime a dozen 820?



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy