Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

'36B Bore and Sleeve

Welcome Guest, Log in or Register
Author 
Kris A NC

01-28-2008 14:11:38




Report to Moderator

Another question on my '36B. I want to bore and sleeve to standard as I have a crack in the lower "skirt" of the cylinder that resides in the main case. I am just looking for a ball park on what I could expect to pay for sleeveing. I just want to know what I need to save up. I know geographics and different companies will matter, but just a ball park. Thanks

Kris A NC




[Log in to Reply]   [No Email]
Maark

01-29-2008 12:43:13




Report to Moderator
 Re: '36B Bore and Sleeve in reply to Kris A NC, 01-28-2008 14:11:38  
If the crack is just in the skirt and not into the water jacket, you should get by with drilling a hole at the end of the crack to keep it from growing longer and forget about it.



[Log in to Reply]  [No Email]
jd b puller

01-29-2008 05:31:38




Report to Moderator
 Re: '36B Bore and Sleeve in reply to Kris A NC, 01-28-2008 14:11:38  
Kris, I'd budget at least $500 - don't forget about gaskets, rings, oil, then the "under $10 items" like filter, lead washers, transport/shipping, etc.



[Log in to Reply]  [No Email]
Kris A NC

01-29-2008 10:09:14




Report to Moderator
 Re: '36B Bore and Sleeve in reply to jd b puller, 01-29-2008 05:31:38  
thanks JD B Puller. All my gaskets and everything to get it back together are on the way. So I have that covered, just curious about the sleeve since I have never done that before.

Kris A NC



[Log in to Reply]  [No Email]
sgt bull

01-28-2008 18:30:09




Report to Moderator
 Re: '36B Bore and Sleeve in reply to Kris A NC, 01-28-2008 14:11:38  
around here, (s. Illinois.) boring alone is about $100 a hole on a deere.. probably double that for boring AND sleeving.



[Log in to Reply]  [No Email]
Kris A NC

01-28-2008 18:57:19




Report to Moderator
 Re: '36B Bore and Sleeve in reply to sgt bull, 01-28-2008 18:30:09  
Thanks Sgt. Bull. I appreciate the info. Just wanting to get a ballpark. Have a great night.

Kris A NC



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy