Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Difference between Partial Powershift and Quadrange

Welcome Guest, Log in or Register
Author 
BobinIL

01-28-2008 05:36:54




Report to Moderator

I was looking at a 4430 this weekend that was advertised as having a partial powershift. but the shifter looked to me like a Quadrange. It had two shifters one for the 4 ranges A,B,C,D and one for the gears (1,2) (3,4) (R1,R2) Is this just a difference in teminology or what?




[Log in to Reply]   [No Email]
Mike Aylward

01-28-2008 10:18:28




Report to Moderator
 Re: Difference between Partial Powershift and Quadrange in reply to BobinIL, 01-28-2008 05:36:54  
Bob, that is just a generic term that is often used with all brands anymore. "Full" powershift means all the speed selections are done with a powershift. "Partial" means just that. Only some of the shifts are done with a powershift while others are done with a clutch. Websites such as Machine Finder and Tractor House use these terms which is probably where this came from. HTH, Mike



[Log in to Reply]  [No Email]
John Jenkins

01-28-2008 09:04:54




Report to Moderator
 Re: Difference between Partial Powershift and Quadrange in reply to BobinIL, 01-28-2008 05:36:54  
It�s a Quad-Range. Some people call them partial powershifts.



[Log in to Reply]  [No Email]
onefarmer

01-28-2008 06:30:22




Report to Moderator
 Re: Difference between Partial Powershift and Quadrange in reply to BobinIL, 01-28-2008 05:36:54  
Sounds like a standard quadrange to me. The only powershift part of it is the shift between 1 and 2, and 3 and 4.



[Log in to Reply]  [No Email]
John51

01-28-2008 06:27:55




Report to Moderator
 Re: Difference between Partial Powershift and Quadrange in reply to BobinIL, 01-28-2008 05:36:54  
Has to be a quadrange. By partial powershift I assume he meant that you have the powershift between 1 & 2, 3 & 4, etc.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy