Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Findings on 52 G with DLTX 71 carb

Welcome Guest, Log in or Register
Author 
Indiana Boy

01-18-2008 16:28:24




Report to Moderator

From what you guys have said and some other research of mine, I have come to the conclusion that the DLTX 51 on my G was replaced with a DLTX 71 for fuel economy when fitted with gas pistons. I have gotten the tractor running and it runs fine with the 71. I have a couple of questions about this setup: (1)Will it hurt the power to have an A carb on a G? (2)Is this an acceptable field update when I restore the tractor or should I put it back to a DLTX 51? Thanks, Jeff

[Log in to Reply]   [No Email]
430WLPG

01-19-2008 17:33:57




Report to Moderator
 Re: Findings on 52 G with DLTX 71 carb in reply to Indiana Boy, 01-18-2008 16:28:24  
I have a original SM2024 service manual dated 1959 and it states that the DLTX51 AF731R is a gasoline carb for G13000-up and the DLTX24 & DLTX38 were allfuel carbs for G1001-G12999, This is a neat book it shows what carb fits everything at that time



[Log in to Reply]  [No Email]
The Dukester

01-19-2008 10:01:24




Report to Moderator
 Re: Findings on 52 G with DLTX 71 carb in reply to Indiana Boy, 01-18-2008 16:28:24  
About 2 years ago I read on the tractor pulling site about using DLTX 71's on G's. The claim was that it made the gas fueled high compression G's lug a little better because at reduced RPM's it was a more efficient carburetor due to the reduced flow area/venturi and resulting in better emulsion of the gas. The big nut 51 was designed with low grade fuel in mind...whether that would make a defineable difference in a gas fueled higher compression tractor I don't know. It does seem like the increased airflow of the bigger 51 carburetor would be beneficial at higher RPM...especially in overbored or stroked engines. I've got a low compression (65-70 lbs. compression) GW, and a "perked up" higher compression (gas pistons and a little off the head-120-125 lbs. compression) G. The G has considerably more power...53-55 h.p. on the belt dyno as opposed to the GW's 40-41. Both tractors have the stock big nut DLTX carburetors, but the G's has been "streamlined" a little (smoothed out inside). The G has battery/distributor ignition and the GW has the stock mag. Both tractors are timed "just short of pinging" on regular gas.

[Log in to Reply]  [No Email]
Mike M

01-19-2008 05:38:57




Report to Moderator
 Re: Findings on 52 G with DLTX 71 carb in reply to Indiana Boy, 01-18-2008 16:28:24  
Like I said before the 51 has an extra hole in the stem to let more fuel to get in. About the only way to tell if your 71 is working right is to run it under a load on a dyno and observe HP and see if you can overfuel it with the load adjustment screw otherwise it may be too lean running which can lock up a fresh engine.



[Log in to Reply]  [No Email]
jd40an

01-19-2008 05:08:44




Report to Moderator
 Re: Findings on 52 G with DLTX 71 carb in reply to Indiana Boy, 01-18-2008 16:28:24  
I started farming in '59, with a "G".One day, while I was talking with the parts man at my local dealership, I mentioned that I thought the "G" used quite a bit of fuel. His comment was that they had sold several "Model A gas" carbs to owners of "high compression" Gs to try to make them use a little less fuel. The reasoning was that a gas carb would work better than an "all fuel 51" when burning gasoline only. I can't remember if there was any comment as to power output between the different carbs. This conversation probably took place in 1960 or '61.

[Log in to Reply]  [No Email]
730-LP

01-18-2008 20:54:04




Report to Moderator
 Re: Findings on 52 G with DLTX 71 carb in reply to Indiana Boy, 01-18-2008 16:28:24  
If you have access to a dyno.Dyno the tractor with the 71 and then put a 51 on and see if there is a difference.I have an A with a power block,with G pistons in it and a 71 won't feed it but runs great with a 51.



[Log in to Reply]  [No Email]
Duane Larson

01-18-2008 18:24:33




Report to Moderator
 Re: Findings on 52 G with DLTX 71 carb in reply to Indiana Boy, 01-18-2008 16:28:24  
Jeff,
If you have any concrete info that Deere recommended switching to the DLTX71 when their gasoline conversion kit was installed on a G, I would appreciate the reference. I'm giving the carburetor talk at the Gathering of the Green this year, and this subject seems to come up. I've worried about this in the past but have never been able to document this "rumor"? Thanks.



[Log in to Reply]  [No Email]
Indiana Boy

01-18-2008 19:20:16




Report to Moderator
 Re: Findings on 52 G with DLTX 71 carb in reply to Duane Larson, 01-18-2008 18:24:33  
I am just beginning my research into this and I haven't been able to confirm anything through any reputable sources. I did some research on the computer(for what that's worth) by Googling different things about the G and noticed that on several different sites they talked about running 71's on G's and a couple talked about fuel economy. I am planning on talking to a friend who worked as a John Deere mechanic and started his career when the 2 cylinders were in production to find out what he knows. If I find out anything interesting I'll keep you posted. Gathering of the Green sounds interesting-- please email me some info. Thanks, Jeff

[Log in to Reply]  [No Email]
Duane Larson

01-18-2008 20:57:44




Report to Moderator
 Re: Findings on 52 G with DLTX 71 carb in reply to Indiana Boy, 01-18-2008 19:20:16  
Jeff,
www.gatheringofthegreen.com - it's all there, but if you decide to go you better round up a room as they apparently are going fast. I've been to them all and wouldn't miss one!



[Log in to Reply]  [No Email]
NE IA

01-18-2008 18:21:16




Report to Moderator
 Re: Findings on 52 G with DLTX 71 carb in reply to Indiana Boy, 01-18-2008 16:28:24  
I have seen alot of B carbs on A's and probably there had to be some differance in preformance, but the farmers could not be convinced it made any differance. Try it and see if it causes a problem before you fix it.



[Log in to Reply]  [No Email]
Buck eye al

01-21-2008 15:23:10




Report to Moderator
 Re: Findings on 52 G with DLTX 71 carb in reply to NE IA, 01-18-2008 18:21:16  
I have one of those A's you mention with a B carb on it. Granted everybody's talking about later tractors than mine which are early styled but..... My '44 A hand start which should have the DLTX 53 on it has a DLTX 34. The '47 long hood has the DLTX 53. Both are one bore over standard with cast iron all fuel pistons installed in the early 90's. They're about as similar as can be though the hand start has not seen a paint shop since '44 while the '47 has a new coat & decals!

I can only see a difference on my dyno. The '47 leans into the load a bit quicker than the '44 and the '44 tops out about 3 HP less than the '47. If I tweak the goveror for better response on the '44, he gets jumpy actually breaking into severe oscillations. The governor is not the problem!

For giggles I once switched the carbs between the tractors. The differences followed the carbs!

Both start easy though the one with the X series mag usually starts the easiest, rarely taking a second compression stroke. I run a mix of #2 & gasoline in both, I use Champion D21 or D23 plugs. I don't have troubles with them fouling. Just last year I took the 1989 vintage D23's out of the '47. Both tractors have fully operating shutters.

Actually using them in the field.... I can't tell the difference.

Later.

[Log in to Reply]  [No Email]
Indiana Boy

01-18-2008 18:04:02




Report to Moderator
 Re: Findings on 52 G with DLTX 71 carb in reply to Indiana Boy, 01-18-2008 16:28:24  
I am planning on using the tractor mainly for parades or light work around the farm, but also plan on pulling 3-14's at our local plow day.



[Log in to Reply]  [No Email]
RobMD

01-18-2008 22:09:15




Report to Moderator
 Re: Findings on 52 G with DLTX 71 carb in reply to Indiana Boy, 01-18-2008 18:04:02  
I believe the 71 was introduced to the G's as a method of leaning them out. Perhaps it may have been the fuel economy issue, but I think it was more intended to give MORE horsepower with GASOLINE- whereas the 51 was better suited with distillate.



[Log in to Reply]  [No Email]
GeorgiaHayFarmer

01-18-2008 16:53:26




Report to Moderator
 Re: Findings on 52 G with DLTX 71 carb in reply to Indiana Boy, 01-18-2008 16:28:24  
If you are going to work it in the field then you might notice a difference. If you are going to use it in a parade or the yard then you may never notice the dltx 71 carb.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy