Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

420w just found in Texas brush what to offer?

Welcome Guest, Log in or Register
Author 
rustworthy

01-12-2008 13:50:06




Report to Moderator

I am familiar with the 420's and really do not know what to offer its non running and i assume its stuck. The sheet metal looks good. what would you offer?




[Log in to Reply]   [No Email]
jd b puller

01-13-2008 05:22:43




Report to Moderator
 Re: 420w just found in Texas brush what to offer? in reply to Mike M, 01-12-2008 13:50:06  

rustworthy said: (quoted from post at 17:50:06 01/12/08) I am familiar with the 420's and really do not know what to offer its non running and i assume its stuck. The sheet metal looks good. what would you offer?


I sold a nice running one (original), for $3500. Ran good, 3pt, 5 speed, no smoke, ok tires, etc. Go backwards from there with the cost of repairs and see what it's "worth" to you.

[Log in to Reply]  [No Email]
buickanddeere

01-12-2008 18:22:23




Report to Moderator
 Re: 420w just found in Texas brush what to offer? in reply to rustworthy, 01-12-2008 13:50:06  
Any fenders, power steering, 4 or 5 speed, live pto, float ride seat, remote hydraulics, dual rockshaft, swept back front axle, spin out rear rims,etc? If optioned to the ears, a near basket case is worthwhile if you can find a donor tractor.



[Log in to Reply]  [No Email]
RobMD

01-12-2008 17:28:13




Report to Moderator
 Re: 420w just found in Texas brush what to offer? in reply to rustworthy, 01-12-2008 13:50:06  
shoot, that's a broad range, they can go from 600-1400 in rough shape but still complete. Absolute junkpiles with more than 25% of the parts missing will run less than 600.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy