Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Running Without a Muffler

Welcome Guest, Log in or Register
Author 
patsdeere

01-08-2008 00:27:56




Report to Moderator

I was wondering how well a B would run without a muffler. I know there needs to be a certain amount of back pressure, but don't know if the exhaust pipe leading to the muffler would create enough.

Would I cause any damage by running it without a muffler? I wouldn't be running it to long - maybe an hour at most.

In advance, thanks for all the knowledge.




[Log in to Reply]   [No Email]
Hoss in Me.

01-08-2008 17:35:38




Report to Moderator
 Re: Running Without a Muffler in reply to patsdeere, 01-08-2008 00:27:56  
Yup,really bad for that engine.Thats why they runem on all those stock cars a drag cars and indy cars.And we cant forget all them nice quiet airplanes flying by way up overhead in the cold cold air. Still suffering from bad hearing,Hoss



[Log in to Reply]  [No Email]
B-maniac

01-08-2008 18:42:27




Report to Moderator
 Re: Running Without a Muffler in reply to Hoss in Me., 01-08-2008 17:35:38  
What isn't being splained here is that your carb is set with a muffler on which does create some back pressure and will require a leaner setting than if there is no muffler and no back pressure. HENCE , if you remove the muffler there is a chance that the resulting lower back pressure will create a too lean mixture unless you re-adjust the load mixture to the richer side. Even then you would only notice it when under heavy load for a length of time. The way it runs should tell you whether it leaned out too much. A lean mixture will run extra hot which could create a problem if run too long. Correctly tuned headers on a race engine will actually scavenge the exhaust out or create a negative pressure but you MUST add more fuel to take advantage of this to make more power. If you are just worried about puttin around for a while without a muffler , go for it , it won't hurt anything....

[Log in to Reply]  [No Email]
THE SMOOTHED DEERES

01-09-2008 15:24:51




Report to Moderator
 Re: Running Without a Muffler in reply to B-maniac, 01-08-2008 18:42:27  
Thank you B maniac that was the point of my post. You should'nt set a carb without the full exhaust system set up ,didn't know whether patsdeere was going to attempt to do this with his little hour run time.



[Log in to Reply]  [No Email]
gtx1967jewison

01-09-2008 07:38:20




Report to Moderator
 Re: Running Without a Muffler in reply to B-maniac, 01-08-2008 18:42:27  
my 48B got richer when i removed the muffler. less burned gasses in the cylinder means more unburned fuel. backpressure leans it out. second, high rpm race engines scavenging exhaust from the cylinder has nothing to do with these. race engines idle faster than this thing runs at full throtttle. never had to touch the carb. also with a carbureted engine increasing airflow into the cylinder by altering exhaust flow will add more fuel on its own- thats how carburetors work- airflow creates more fuel flow. adding headers for example to a v-8 pickup with a carburetor will add power with NO change to the carb settings. in fact so will an injected engine- the computer just adjusts the fuel rather than the carb. a carb adjusts fuel flow to match airflow on demand, varies with engine speed/airflow.

[Log in to Reply]  [No Email]
buickanddeere

01-08-2008 17:20:41




Report to Moderator
 Re: Running Without a Muffler in reply to patsdeere, 01-08-2008 00:27:56  
B.S. #1, an engine needs back pressure. B.S. #2, cold air is going to fall down the hot exhaust system and soak up enough btu's to shock cool the valves. Any air in the exhaust system is going to be hotter and less dense than the outside ambient air. And rise up the stack.



[Log in to Reply]  [No Email]
Kemper

01-08-2008 17:33:20




Report to Moderator
 Re: B.S.yourself Buick and Deere in reply to buickanddeere, 01-08-2008 17:20:41  
We are talking about running straight off the manifold without a stack,READ THE POST,what i said was if cold air would blow into the open manifold after the engine was shut down it can warp the valves, i have read about it in books before.



[Log in to Reply]  [No Email]
RobMD

01-08-2008 19:46:05




Report to Moderator
 Re: B.S.yourself Buick and Deere in reply to Kemper, 01-08-2008 17:33:20  
Maybe on the planet Pluto, where temperatures reach -450 C. Might wanna run a muffler and pipe there. :)



[Log in to Reply]  [No Email]
buickanddeere

01-08-2008 18:33:40




Report to Moderator
  B.S. filter and shield at work here, find some for yourself in reply to Kemper, 01-08-2008 17:33:20  
Cold air isn't going to get in there even with the manifold removed and the ports sitting wide open. What is causing the airflow "in" ? How much shock/stress the valves take getting slammed shut 10 times per second. With red hot combustion gases flowing over the valve. Then cool intake air with a fine mist of gasoline droplets and vapour hitting the exhaust valve during the intake stroke. The exhaust valve may even have some of this "cold air" drawn right over it during the intake & exhaust overlap. How many people here never passed basic high school physics and/or believe everything they are told without thinking the facts through.

[Log in to Reply]  [No Email]
old

01-08-2008 14:42:43




Report to Moderator
 Re: Running Without a Muffler in reply to patsdeere, 01-08-2008 00:27:56  
My 1935 B runs just fine with a straight pipe, but its not going to stay on it much longer since I just picked up a brand new muffler from Shapes in Fair grove MO today. I never have liked the way it looked with the straight pipe so when I found a place that had ones I jumped on it



[Log in to Reply]  [No Email]
RobMD

01-08-2008 14:07:36




Report to Moderator
 Re: Running Without a Muffler in reply to patsdeere, 01-08-2008 00:27:56  
The only thing that sounds good is a styled or unstyled "G" with a 5 inch striaght pipe. The styled "A" and unstyled "A" also sound good with a 5 inch straight stack.

A Late "B" or an "H" sound rather, obnoxious with a straight pipe. An unstyled "B" wiht a straight pipe at idle sounds kind of neat.

Diesels don't really capture my attention with a straight, they're rather obnoxious too.



[Log in to Reply]  [No Email]
Big G

01-08-2008 18:13:05




Report to Moderator
 Re: Running Without a Muffler in reply to RobMD, 01-08-2008 14:07:36  
I know just what you mean. My 50 G has a 5" thin wall pipe and my sons 35 A" has a 4" .25 wall. We like for our neighbors to know when we are working over here. I have not been told off about it yet, so I guess they like it.



[Log in to Reply]  [No Email]
BUTCH GA.

01-08-2008 16:09:41




Report to Moderator
 Re: Running Without a Muffler in reply to RobMD, 01-08-2008 14:07:36  
Rob I have a 1948 "M" with a 3 inch chrome stack that sounds AWSOME at low idle. been on there for years.



[Log in to Reply]  [No Email]
Kemper

01-08-2008 10:10:48




Report to Moderator
 Re: Running Without a Muffler in reply to patsdeere, 01-08-2008 00:27:56  
It will run just fine off the manifold,but don't shut it off outside and then let cold air blow into the manifold,it will warp the valves because of cooling them too fast.



[Log in to Reply]  [No Email]
Maark

01-08-2008 09:44:21




Report to Moderator
 Re: Running Without a Muffler in reply to patsdeere, 01-08-2008 00:27:56  
I've got a 29D and 29GP neither tractor ever had a muffler on them. Elbow straight out from the manifold since new.



[Log in to Reply]  [No Email]
THE SMOOTHED DEERES

01-08-2008 08:46:33




Report to Moderator
 Re: Running Without a Muffler in reply to patsdeere, 01-08-2008 00:27:56  
They run better with backpressure . Run it straight from the manifold and u'll find out .



[Log in to Reply]  [No Email]
Bob

01-08-2008 09:14:14




Report to Moderator
 Scavenging in reply to THE SMOOTHED DEERES, 01-08-2008 08:46:33  
I think the effect you are TRYING to describe is the SCAVENGING efect of a length of pipe, NOT backpressure, which only "kills" HP on a 4-cycle engine.

What GOOD do you THINK backpressure would do???



[Log in to Reply]  [No Email]
THE SMOOTHED DEERES

01-08-2008 09:36:32




Report to Moderator
 Re: Scavenging in reply to Bob, 01-08-2008 09:14:14  
So your saying you can properly adjust idle settings running straight from a manifold ?



[Log in to Reply]  [No Email]
Bob

01-08-2008 09:56:10




Report to Moderator
 Re: Scavenging in reply to THE SMOOTHED DEERES, 01-08-2008 09:36:32  
My point was, I believe the issue here is SCAVENGING, rather than backpressure.

I'll leave setting the idle to you!



[Log in to Reply]  [No Email]
THE SMOOTHED DEERES

01-08-2008 10:05:39




Report to Moderator
 Re: Scavenging in reply to Bob, 01-08-2008 09:56:10  
Thanks bob for clearing up the differences there . I should have said they will run better if the have some scavenging going on ! My fault.



[Log in to Reply]  [No Email]
gtx1967jewison

01-09-2008 07:15:09




Report to Moderator
 Re: Scavenging in reply to THE SMOOTHED DEERES, 01-08-2008 10:05:39  
warp your brain maybee but not the valves from cold air! also they run fine off the manifold, no effect on idle settings at all- its a 4-stroke engine! what are the valves for? what happens when we use camshafts with more overlap, different lobe separation etc to get more power at different rpms? go back to highschool- read a book. some of u seem to be giving advice with absolutely no knowledge or understanding of the situation at all. if u dont know, dont tell. nobody wants wrong or false info when they ask for help. old spoker D's ran straight off the head since new, with only an elbow maybee 4" long to direct the flames out! guess what? somebody ground feed withit at 30 below zero & it still ran the next day after they shut it off or it died & never covered the "elbow" with an asbestos quilt!

[Log in to Reply]  [No Email]
THE SMOOTHED DEERES

01-08-2008 11:42:38




Report to Moderator
 Re: Scavenging in reply to THE SMOOTHED DEERES, 01-08-2008 10:05:39  
Maybe this effect is more noticable in a HIGH compression tractor like mine :) ?



[Log in to Reply]  [No Email]
gtx1967jewison

01-08-2008 07:43:50




Report to Moderator
 Re: Running Without a Muffler in reply to patsdeere, 01-08-2008 00:27:56  
its a 4 stroke engine- it dont need any backpressure, & no u wont hurt anything. mowed 4 acres all summer with my 48 B with just a manifold.



[Log in to Reply]  [No Email]
patsdeere

01-08-2008 06:56:07




Report to Moderator
 Re: Running Without a Muffler in reply to patsdeere, 01-08-2008 00:27:56  
Oh boy. Thats great. I guess I will just throw some ear muffs on and get a rollin. :)))



[Log in to Reply]  [No Email]
jd40an

01-08-2008 03:58:59




Report to Moderator
 Re: Running Without a Muffler in reply to patsdeere, 01-08-2008 00:27:56  
The only damage would be to your hearing.



[Log in to Reply]  [No Email]
WeirdDeere

01-08-2008 00:41:03




Report to Moderator
 Re: Running Without a Muffler in reply to patsdeere, 01-08-2008 00:27:56  
No damage possible to the engine that I know about. Just noisy.

I'd almost bet that you could run an open manifold with no problems.

Brandon



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy