Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

B Muffler vs Hood

Welcome Guest, Log in or Register
Author 
patsdeere

01-05-2008 13:14:21




Report to Moderator

I was going to put on my hood today and ran into a small problem. It seems that the bends/fold overs in the muffler are too big to fit through the hood. It is a replacement muffler. Any ideas (short of replacing it) on how to get it on?

Thanks.




[Log in to Reply]   [No Email]
MLD

01-08-2008 09:09:46




Report to Moderator
 Re: B Muffler vs Hood in reply to patsdeere, 01-05-2008 13:14:21  
I can't believe you got one that the hood hasn't already been cut on. Every A, B, in my area are all chopped up.



[Log in to Reply]  [No Email]
machinery-man

01-06-2008 05:59:33




Report to Moderator
 Re: B Muffler vs Hood in reply to patsdeere, 01-05-2008 13:14:21  
you have the wrong muffler for tractor. This is a field or cheaper muffler. The correct muffler is same size as it goes through hood. Proper way to replace is remove the hood(bad John Deere ideal at the time) then install.



[Log in to Reply]  [No Email]
P Browning

01-05-2008 17:52:34




Report to Moderator
 Re: B Muffler vs Hood in reply to patsdeere, 01-05-2008 13:14:21  
Pat -- who did you purchase your muffler from? Is there a chance they filled your order incorrectly? Please call them and try to work it out. No matter what -- be patient. All will be jsut right in the end -- but you must work it.

This is such a common item to tractor restoration that some simple issue is in your way, and whatever you do DO NOT CUT SHEET METAL. That is such an abomination. We all want to save you from the sickness you will have in your gut if you did cut it! (PatB)

[Log in to Reply]  [No Email]
patsdeere

01-05-2008 18:38:33




Report to Moderator
 Re: B Muffler vs Hood in reply to P Browning, 01-05-2008 17:52:34  
I would go with no muffler before I would cut the sheetmetal since it is darn near perfect.

I figured I would call the guys I got it from and see what they have to say. I don't think it was a misship, but anything is possible.

Does anybody have an original that they could measure the overall diameter - highlighted in red - so I can figure out what it is supposed to be?

third party image
This isn't mine, but one I grabbed off the web.

Thanks.

[Log in to Reply]  [No Email]
aftermarket

01-05-2008 23:38:42




Report to Moderator
 Re: B Muffler vs Hood in reply to patsdeere, 01-05-2008 18:38:33  
Someone sold you a Stanley aftermarket fits all muffler if it looks like that. Originals are straight all one diameter.



[Log in to Reply]  [No Email]
Duane Larson

01-05-2008 17:39:57




Report to Moderator
 Re: B Muffler vs Hood in reply to patsdeere, 01-05-2008 13:14:21  
patsdeere,
Have you tried Detwiler - he sells a muffler for B's with s/n 60000 - 96000, and I think he makes a lot of his mufflers - you can likely get one without the baffles if you like the noise but want it to look original. 715-659-4252



[Log in to Reply]  [No Email]
Mike M

01-05-2008 16:39:38




Report to Moderator
 Re: B Muffler vs Hood in reply to patsdeere, 01-05-2008 13:14:21  
Get the right muffler from John Deere.



[Log in to Reply]  [No Email]
RayP(MI)

01-05-2008 15:36:52




Report to Moderator
 Re: B Muffler vs Hood in reply to patsdeere, 01-05-2008 13:14:21  
Well, you have two choices - neither one is easy. You can cut the hole larger and then patch it. They used to sell a patch that simply screwed down with sheet metal screws. Ugly!

Second choice is to remove the hood, install the muffler, and then reinstall the hood. Haven't done this for a while, and someone can probably give better infro. You'll need to remove steering wheel, open up steering gear and slide steering shaft thru the front of gearbox to clear the opening in hood. Then there's the hood, which carries the gas tank. So you'll need to lift hood and tank together. Seems like there's some linkage thru here that controls the shutters too. It will help to have a second person when you're doing all this. Been there - done it, cna be done, just time consuming.

[Log in to Reply]  [No Email]
patsdeere

01-05-2008 15:40:18




Report to Moderator
 Re: B Muffler vs Hood in reply to RayP(MI), 01-05-2008 15:36:52  
I have already done the second choice. I have everything off and ready to install the hood. The problem is that the top ring of the muffler doesn't pass through the hole on the hood. It seems that the reproduction muffler is just too big. I plan to have a talk with the people I got it from.



[Log in to Reply]  [No Email]
Gary from Muleshoe

01-05-2008 14:32:57




Report to Moderator
 Re: B Muffler vs Hood in reply to patsdeere, 01-05-2008 13:14:21  
You will most likely have to enlarge the hole a bit to get it on. I have a 1940 B and could not find a muffler to fit. Also getting the correct straight pipe is tricky also. The 3 bolt flange for the 39 & 40 year Bs are different than the unstyled. I had to make one using the old flange I had. I ordered one and it did not fit. The flange for unstyled is approximately a 1/4" longer than the early styled.

Also the club here restored a 1945 to give away last year and they had to enlarge the hole to get it over the muffler for the same problem you have.

[Log in to Reply]  [No Email]
Mike M

01-05-2008 16:41:52




Report to Moderator
 Re: B Muffler vs Hood in reply to Gary from Muleshoe, 01-05-2008 14:32:57  
I think John Deere still sells those for the 39-40 models yet. I have an NOS one laying around here somewhere. I first thought it would fit my unstyled,but the bolt holes were different and the pipe hole was too I think.



[Log in to Reply]  [No Email]
patsdeere

01-05-2008 14:38:32




Report to Moderator
 Re: B Muffler vs Hood in reply to Gary from Muleshoe, 01-05-2008 14:32:57  
Thanks.

I don't quite get why they can't make them the right size when they create the replacements. It isn't like they are all custom built.

What is the best way to enlarge the whole without screwing up the paint job and still having it look good?



[Log in to Reply]  [No Email]
THE SMOOTHED DEERES

01-05-2008 16:05:08




Report to Moderator
 Re: B Muffler vs Hood in reply to patsdeere, 01-05-2008 14:38:32  
It's already painted ... ewww . Better take some off that muffler if possible and repaint it rather than mess the hood up . How much do you need to remove to get it to fit ?



[Log in to Reply]  [No Email]
patsdeere

01-05-2008 16:28:29




Report to Moderator
 Re: B Muffler vs Hood in reply to THE SMOOTHED DEERES, 01-05-2008 16:05:08  
Not much, but way too much. Probably around 1/8"-3/16". I don't think I could take enough off and still have a muffler that looks good. The metal is probably 3/32 or so thick and if I tried grinding it off there would be no way to make a nice smooth roll like there is now.



[Log in to Reply]  [No Email]
B-maniac

01-05-2008 18:26:23




Report to Moderator
 Re: B Muffler vs Hood in reply to patsdeere, 01-05-2008 16:28:29  
Get a different muffler for sure. If these vendors don't even reallize what they are selling then don't do bussiness with them again. The reason they keep selling this junk is that most people will "improvise" instead of telling them to "stick it' like they should. Proves just how well they check out their merchandise. This kind of crap will only get worse if people don't start holding them accountable. They advertise it to "FIT"!! To me that means more than the fact that it will bolt on. Can't tell me they haven't been told by someone before about the problem. If they don't know of the problem , they are ignorant , if they do know and still sell them to fit then they are crooks!!

[Log in to Reply]  [No Email]
THE SMOOTHED DEERES

01-05-2008 16:42:30




Report to Moderator
 Re: B Muffler vs Hood in reply to patsdeere, 01-05-2008 16:28:29  
I always mock up a tractor before putting paint on to make sure there are no problems . Shop around for a different muffler . You hate to cut a hood if you don't have too! Fit taught me that one .lol



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy