Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

B hood removal

Welcome Guest, Log in or Register
Author 
codie

12-08-2007 07:41:02




Report to Moderator

I can't figure out how the hood comes off my styled B. I have all of the bolts out but don' know how to get the hood over the steering shaft or the steering shaft off the tractor. Could someone please tell me how to do this?




[Log in to Reply]   [No Email]
DickD

12-10-2007 09:00:07




Report to Moderator
 Re: B hood removal in reply to codie, 12-08-2007 07:41:02  
While we are on the subject of hood removal, is there some particular reason why Deere waited 15 years to move muffler up to where you can remove it without taking the hood off?



[Log in to Reply]  [No Email]
ramtuff

12-10-2007 11:13:43




Report to Moderator
 Re: B hood removal an other repairs in reply to DickD, 12-10-2007 09:00:07  
I was mechanic at a john deere dealership.Bad engineering,always has been an still is in most cases.John Deere worked hard atit to make anything hard as he** to work on,for instance A 4020,3020,to 4960's.To design a tractor to have to pull the axle out from under it to takr the hyd pump off,is poor as well as many others.I have 3 old 2cyls to goof around with.But had to do any farming with them.I would'nt give a H or M Farmall for all 3 of them.Like comparing ice creme to shi***

[Log in to Reply]  [No Email]
DickD

12-09-2007 00:32:00




Report to Moderator
 Re: B hood removal in reply to codie, 12-08-2007 07:41:02  
Codie; After you complete this job once, you will better understand why so many of the hoods have been cut out so the muffler could be replaced without removing the hood.



[Log in to Reply]  [No Email]
codie

12-08-2007 11:44:30




Report to Moderator
 Re: B hood removal in reply to codie, 12-08-2007 07:41:02  
Thanks for the help everyone but now I have another problem. I have removed the steering wheel and turned the shaft, once the front wheels have turned all the way it binds up and will not move in either direction even with the steering wheel. Now what have I done wrong?



[Log in to Reply]  [No Email]
P Browning

12-08-2007 13:16:39




Report to Moderator
 Re: B hood removal in reply to codie, 12-08-2007 11:44:30  
Grab the wheels -- turn them back straight, and then attempt to remove the steering shaft by turning it in the opposite direction.

Take the small cover off the top of the pedestal where the two gears (steering worm gear and sector gear) meet (4 small screws). Then you will better be able to see what is happening. (PatB)



[Log in to Reply]  [No Email]
codie

12-08-2007 13:22:14




Report to Moderator
 Re: B hood removal in reply to P Browning, 12-08-2007 13:16:39  
I have removed the top cover and tried turning the wheels straight and going the opposite way, this does not seem to help.



[Log in to Reply]  [No Email]
Andy Motteberg

12-08-2007 21:11:32




Report to Moderator
 Re: B hood removal in reply to codie, 12-08-2007 13:22:14  
Try tapping the shaft out with a hammer. Hammer with the nut on so you don't damage the steering shaft threads.



[Log in to Reply]  [No Email]
P Browning

12-08-2007 13:46:04




Report to Moderator
 Re: B hood removal in reply to codie, 12-08-2007 13:22:14  
One more time -- be sure you have the end bearing cap for the steering shaft removed (front of the tractor), then slide the steering wheel back onto the shaft with the key in place and turn to the right. The wheels may turn also but there is a stop, and once the stop is reached, continuing to turn the wheel RIGHT should break it loose and the shaft begin to emerge to the front. Call me if this don't work (830) 627-0430 (Pat)

[Log in to Reply]  [No Email]
codie

12-09-2007 13:32:00




Report to Moderator
 Re: B hood removal in reply to P Browning, 12-08-2007 13:46:04  
Any ideas why the wheel would turn all the way to the right and then lock up? The front wheel will not turn and the steering wheel, shaft will not turn now.



[Log in to Reply]  [No Email]
Andy Motteberg

12-08-2007 11:42:32




Report to Moderator
 Re: B hood removal in reply to codie, 12-08-2007 07:41:02  
You need to remove the steering shaft. Remove the steering wheel and key, remove the medallion off the front of the tractor, remove the bearing cap, the cap has two bolts. Catch the bearing and be careful not to damage it. There is another bearing behind it. Slowly turn the steering shaft in the direction it starts to come out. When the worm gear is off the sector gear, pull the shaft straight out.

[Log in to Reply]  [No Email]
P Browning

12-08-2007 08:04:11




Report to Moderator
 Re: B hood removal in reply to codie, 12-08-2007 07:41:02  
No problem -- you must remove the steering shaft. First, remove the steering wheel. Then remove the medallion (nose cone). This gives you access to the steering shaft bearing cover. Remove the cover, catch the bearing, and then turn the shaft so that it moves forward enough to disengage from the sector (the other) gear. Then carefully slide the shaft forward to remove it.

You need to acquire the books for your tractor. Begin by learning which ones Deere has for you, and then by shopping. And to this end, go to the JD-H Restoration Site (below); scan across to ARTICLES 1, and of the drop-downs, select DEERE PUBS. Page 2 of the piece tells you which pubs are for your tractor, and page 1 tells you how to get them. Enjoy! (PatB)

[Log in to Reply]  [No Email]
B_Bob

12-08-2007 08:02:09




Report to Moderator
 Re: B hood removal in reply to codie, 12-08-2007 07:41:02  
Remove the shaft from the pedestal at the front and pull it out towards the back; lift the hood and tank together up over the muffler and air stack. Having two people makes it easier.



[Log in to Reply]  [No Email]
B_Bob

12-08-2007 08:08:14




Report to Moderator
 Re: B hood removal in reply to B_Bob, 12-08-2007 08:02:09  
I stand corrected....remove shaft out the FRONT.



[Log in to Reply]  [No Email]
Bob Collins

12-08-2007 07:58:57




Report to Moderator
 Re: B hood removal in reply to codie, 12-08-2007 07:41:02  
This is not the most fun job, it just takes a bit of prep work. Remove the steering wheel and the 2 bolts holding the cap on the front end of the steering shaft. retain the shims/gasket and bearing and "screw" the shaft forward and out the front. Now with all the wires and fuel lines and shutter linkage disconnected and with a helper the hood and tank can be lifted off. It helps to have the tank empty too.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy