Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Easy D question (maybe)

Welcome Guest, Log in or Register
Author 
Farmboy169

11-25-2007 14:40:06




Report to Moderator

Had the ol '46D out today for a few more hours of break-in time. Question is, when it gets warmed up to operating temp. (150-180) it starts to miss under load and a little extra "poppy" when siting idling. When it's cold it runs just fine. I was thinking the valves. I adjusted them to the book "cold" but have not adjusted them "hot" yet. Is this a good place to start? I'm almost positive it's not the carb. Any other suggestions? Thanks guys.

[Log in to Reply]   [No Email]
G Rainey

11-26-2007 15:39:53




Report to Moderator
 Re: Easy D question (maybe) in reply to Farmboy169, 11-25-2007 14:40:06  
Farmboy did you magnaflux head when you had the head off,sounds like you might have a crack opening up when the temp. comes up. A reminder don't install new seats in the untake valves,you can put them in the exh. but not the intake,on the D and W head there isn't enogh meat arond the intake valve . Gman



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy