Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

3point hitch for late Model 50

Welcome Guest, Log in or Register
Author 
gitrib

11-10-2007 19:36:20




Report to Moderator

Can anyone tell me if JD had there own 3point hitch for rhe Model 50.




[Log in to Reply]   [No Email]
buickanddeere

11-12-2007 04:03:58




Report to Moderator
 Re: 3point hitch for late Model 50 in reply to gitrib, 11-10-2007 19:36:20  
Here are some links for other 3 point hitch outfits for the pre 20 series two cylinders. >Link
Link href="http://www.hoxeyhitch.com/">Link
http://www.angelfire.com/biz/Ironwood/3point.html



[Log in to Reply]  [No Email]
machinery-man

11-11-2007 06:38:47




Report to Moderator
 Re: 3point hitch for late Model 50 in reply to gitrib, 11-10-2007 19:36:20  
John Deere referred to their arrangement as lift/lift kit or other names but not 3 point to avoid encroachment on the Ferguson patent. That is why they may the confluted top attaching setup both on Yakima ane the 800-801. If you noticed they stayed away from side stabilizing bars and the chains(hard to use, shifty) were used. Anything so it didn't exactly looking like the Ferguson ideal. In 56 they couldn't get away from the old ideal fast enough with the 20 series and added a good hydraulic lift. The capacity is comparable with today's tractors.

[Log in to Reply]  [No Email]
wilamayb

11-11-2007 07:46:07




Report to Moderator
 Re: 3point hitch for late Model 50 in reply to machinery-man, 11-11-2007 06:38:47  
Actually Deere did call it three point. The top of the parts catalog says "hitches, 3-point, 800, 800A, 801.



[Log in to Reply]  [No Email]
buickanddeere

11-10-2007 20:43:15




Report to Moderator
 Re: 3point hitch for late Model 50 in reply to gitrib, 11-10-2007 19:36:20  
There is an aftermarket bracket that allows an ordinary top link to be use don a 50,60 or 70. Saginaw Hitch is one. There is another manufacture in Michigan however the name escapes me.



[Log in to Reply]  [No Email]
wilamayb

11-10-2007 20:02:27




Report to Moderator
 Re: 3point hitch for late Model 50 in reply to gitrib, 11-10-2007 19:36:20  
Here is an even better link to some photos showing the differences between the three types of Deere hitches.



[Log in to Reply]  [No Email]
RobMD

11-10-2007 19:46:22




Report to Moderator
 Re: 3point hitch for late Model 50 in reply to gitrib, 11-10-2007 19:36:20  
John Deere had the Yakima 800 series hitches which are very similar to 3 points, but with a few minor differences. The draft links are comparable to a regular three point but the 'top link' in this case are two arms with a cross piece.

Do a search for 801 hitch on this site, perhaps in the photo ads or tractor photos, to see what one looks like. You may find them on ebay often for 500 bucks.

[Log in to Reply]  [No Email]
4020LP

11-10-2007 20:10:36




Report to Moderator
 Re: 3point hitch for late Model 50 in reply to RobMD, 11-10-2007 19:46:22  
The 800 Series Hitches were built by the Plow Works, not the Yakima Works. The Yakima Works built the ABG-1000, ABG-2000, and No. 2100 Tool Carriers. Big differences.



[Log in to Reply]  [No Email]
wilamayb

11-10-2007 19:59:09




Report to Moderator
 Re: 3point hitch for late Model 50 in reply to RobMD, 11-10-2007 19:46:22  
Actually the Yakima hitch was not manufactured by Deere an Company. They were manufactured by Yakima to fit letter series Deeres. Most of these hitches are not coplete. They do not seem to be as saught after as the real Deere hitch.

Deere did manufacture a lift hitch starting with the first numbered series tractors. The hitches included the 800, 800A, and 801 lift hitches. These hitches were discontinued with the production of the 20 series two cylinders. Deere went to a certified/standardized three point hitch.

[Log in to Reply]  [No Email]
4020LP

11-11-2007 04:29:09




Report to Moderator
 Re: 3point hitch for late Model 50 in reply to wilamayb, 11-10-2007 19:59:09  
I got news for you, beginnning in 1947, the Lindeman Company of Yakima, Washington, became a part of Deere & Company! I have Operator's Manuals for the Yakima Hitches printed by Deere.



[Log in to Reply]  [No Email]
wilamayb

11-11-2007 05:20:27




Report to Moderator
 Re: 3point hitch for late Model 50 in reply to 4020LP, 11-11-2007 04:29:09  
Acutally I didnt know that Yakima was owned by Deere, but still not manufactured, engineered or sold under the Deere name.

Lets think about it like this... A&I parts is owned by Deere and Company. The parts are sold by Deere dealerships, but we would never call them Deere parts would we? They are A&I parts.



[Log in to Reply]  [No Email]
4020LP

11-11-2007 09:00:55




Report to Moderator
 Re: 3point hitch for late Model 50 in reply to wilamayb, 11-11-2007 05:20:27  
Well, since on January 1, 1947, Deere bought the physical property, machinery, patents and other assests of the Lindeman Power Equipment Company of Yakima, WA, I'd say every complete machine and part built at Yakima thereafter until the plant closed in 1954 was manufactured, engineered, and sold under the John Deere name. Personally, I'd call them John Deere machines and parts.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy