Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Tractors to shiny ?

Welcome Guest, Log in or Register
Author 
two cylinders s

10-01-2007 07:37:32




Report to Moderator

Has anyone saw an old john deere where all the cast has been smoothed ? Link




[Log in to Reply]   [No Email]
CalJim

10-01-2007 20:38:51




Report to Moderator
 Re: Tractors to shiny ? in reply to two cylinders saves gas, 10-01-2007 07:37:32  
I can appreciate all that hard work, most have no idea what it took to do that. I did see the 6030 at the Expo,it was definitely one of a kind. Just another example of how we all have different conceptions about these machines. I myself would never smooth out cast, I think the texture and imperfections are original and should remain. That certainly doesn't make anybody right or wrong, this is what makes it all interesting. CalJim

[Log in to Reply]  [No Email]
two cylinders saves gas

10-02-2007 17:46:22




Report to Moderator
 Re: Tractors to shiny ? in reply to CalJim, 10-01-2007 20:38:51  
I'm tired of going to shows and seeing the same kind of tractors part of my reason for doing it . There was 240 tractors at our local show this year maybe 15 of them you could really tell someone spent some time on the paint in detail. Not one near as shiny as the b i got on the way .I realize alot of these tractors are used and pulled and left outside to rust and people bring them to the SHOW ? I'm tryin to display for the people what a brand new Old deere would look like after it rolled of the assembly line only smoother lol. Dont worry i get the old fellows saying thats to shiny ,those tractors are supposed to be worked , but i bet they would take my tractors off my hands in a second if i offered. Praise for my paint jobs have far outweighed the negative comments.

[Log in to Reply]  [No Email]
Mike M

10-02-2007 18:08:40




Report to Moderator
 Re: Tractors to shiny ? in reply to two cylinders saves gas, 10-02-2007 17:46:22  
I was thinking that maybe your tractor is how JD would of set one up for it's introduction at some big show ?

I wonder if anyone is still around that remembers these premiers and if they did indeed have them done up alot better than the ones off the line.



[Log in to Reply]  [No Email]
sodly

10-03-2007 07:31:56




Report to Moderator
 Re: Tractors to shiny ? in reply to Mike M, 10-02-2007 18:08:40  
I'm told that back in the 50s and 60s Deere would send its show tractors to local body shops for a more professional paint job. These tractors were finished much more carefully than the tractors coming off the line at the factory.



[Log in to Reply]  [No Email]
two cylinders saves gas

10-02-2007 19:37:38




Report to Moderator
 Re: Tractors to shiny ? in reply to Mike M, 10-02-2007 18:08:40  
I would guess they wouldnt worry to much about making them great looking paint wise .I'm sure they displayed the newest attachments and gismo's to attract the farmers . Maybe some x models were used at shows ?



[Log in to Reply]  [No Email]
JDBert

10-01-2007 17:25:02




Report to Moderator
 Re: Tractors to shiny ? in reply to two cylinders saves gas, 10-01-2007 07:37:32  
Been there done that got the T-shirt!
Dont think I would do it again though- took me 8 hours to do the main case and 4 to do the frame and I have NO idea how much time it took to do all the other parts- this was a 70 gas so I did the dash and everything. Lots of time lots of grinding stones and ALOT of face mask filters!

third party image

third party image

[Log in to Reply]  [No Email]
P Browning

10-01-2007 18:09:11




Report to Moderator
 Re: Tractors to shiny ? in reply to JDBert, 10-01-2007 17:25:02  
You may feel that too much time was spent on those things -- but I salute your effort -- Great job!! Well Done. If you are going at something, do it to the fullest. (PatB)



[Log in to Reply]  [No Email]
Dave H

10-01-2007 15:07:40




Report to Moderator
 Mike M's comment in reply to two cylinders saves gas, 10-01-2007 07:37:32  
I ran into the same thing on "think you could paint my tractor when we have time, how much?"

If it is a good friend of mine that we trade work on I tell them, the only way I would paint a tractor or tractor parts is for free.

If i am not in the mood i say that I just cannot work painting into my schedule.

Man I hope this social security never runs out lol.



[Log in to Reply]  [No Email]
PeterE

10-01-2007 11:19:52




Report to Moderator
 Re: Tractors to shiny ? in reply to two cylinders saves gas, 10-01-2007 07:37:32  
Did you see the 6030 at this year's Expo? Every inch of cast iron on that machine was smooth as glass. Engine, tranny, wheels, axles, drawbar... everything.



[Log in to Reply]  [No Email]
mjbrown

10-01-2007 10:42:16




Report to Moderator
 Re: Tractors to shiny ? in reply to two cylinders saves gas, 10-01-2007 07:37:32  
They probably used a high fill primer.



[Log in to Reply]  [No Email]
Mike M

10-01-2007 08:15:02




Report to Moderator
 Re: Tractors to shiny ? in reply to two cylinders saves gas, 10-01-2007 07:37:32  
Someone has wayyyyy yyyyy yy too much spare time.

It sure does shine.



[Log in to Reply]  [No Email]
two cylinders saves gas

10-01-2007 11:05:24




Report to Moderator
 Re: Tractors to shiny ? in reply to Mike M, 10-01-2007 08:15:02  
Guess im the only one smoothing out old deere's ! lol A complete picture of tractor coming soon . Thks mike and many others on here for the mechanical advice ,you all have a small hand in on this tractor.



[Log in to Reply]  [No Email]
Mike M

10-01-2007 11:25:47




Report to Moderator
 Re: Tractors to shiny ? in reply to two cylinders saves gas, 10-01-2007 11:05:24  
So that is yours ? so how did you do it ?

I tend to leave my castings with all the character and imperfections JD gave them. LOL ( mother nature too )



[Log in to Reply]  [No Email]
two cylinders saves gas

10-01-2007 12:15:44




Report to Moderator
 Re: Tractors to shiny ? in reply to Mike M, 10-01-2007 11:25:47  
Well my mt i painted 5 years ago was my first attempt at an all smooth tractor and it turned out good . Link It gets many compliments and i got requests to paint others tractors for them ,little do they realize the thousands of hours of sanding it takes. I felt i could do better on the paint and i always wanted a horizontal two cylinder well a freind of mine had a 48 b he pulls with at shows he said one day he wanted to sell for 1700.00 This tractor had some of the straightest sheetmetal ive seen ,cut hood of coarse,but only a couple dings.He just resleeved motor with big pistons so it was sound in that department. I also know im the fourth owner of tractor and it was cared for all its life which is always important when selecting something to restore .It came to our household over two years ago and now is almost done. How do you smooth cast ? Alot of grinding sanding and painting ALOT! I am a painter by trade so im used to the prep work which is the most important part. You just cant smooth one part it would look dumb so once u start everything needs to be smooth ,my pressed steel frame helped me on this one it helps with the effect. Everything down to the rod on my acc. air tire pump which i plan to display on the tractor . Basically i consider my tractors retired and now they are art pieces more or less for people to appreciate . They dont like dirt anymore lol

[Log in to Reply]  [No Email]
Gary from Muleshoe

10-01-2007 15:44:33




Report to Moderator
 Re: Tractors to shiny ? in reply to two cylinders saves gas, 10-01-2007 12:15:44  
third party image

Here you go



[Log in to Reply]  [No Email]
Mike M

10-01-2007 12:45:24




Report to Moderator
 Re: Tractors to shiny ? in reply to two cylinders saves gas, 10-01-2007 12:15:44  
A painter by trade. Well that does explain it better right there. My hats off to you as I would never do all that work.

I by no means call myself a painter. But I do pretty good. I always get a kick out of it when people see my tractors and want me to paint theirs. They think you will do it for $300-$500 They have no idea how much time I even spend to get them like I do yet alone to get them to YOUR level. I can't even imagine that !

[Log in to Reply]  [No Email]
P Browning

10-01-2007 13:17:57




Report to Moderator
 Re: Tractors to shiny ? in reply to Mike M, 10-01-2007 12:45:24  
Mike -- I finally managed to get my new tractor's Story Boards up over the weekend. During first download, they may come in slow -- depending on you Internet D/L rate. But the story is told in two division, one 7 parts the other 8. I have posted nearly 200 pictures, many of them at 500KB of data -- very clear! Enjoy! (PatB)

[Log in to Reply]  [No Email]
two cylinders saves gas

10-01-2007 13:06:38




Report to Moderator
 Re: Tractors to shiny ? in reply to Mike M, 10-01-2007 12:45:24  
Hopefully you could see it in person sometime i think you said your in southern ohio? I plan on taking it to a few shows next year . I'll post pictures soon only have hood and grill left to spray .



[Log in to Reply]  [No Email]
Mike M

10-02-2007 05:13:38




Report to Moderator
 Re: Tractors to shiny ? in reply to two cylinders saves gas, 10-01-2007 13:06:38  
I'm about 70 + miles north of Columbus Ohio.



[Log in to Reply]  [No Email]
B-maniac

10-02-2007 19:05:14




Report to Moderator
 Re: Tractors to shiny ? in reply to Mike M, 10-02-2007 05:13:38  
I am also a painter by trade (35 yrs). Each to his own,but I prefer a mix of both cast look and smooth. To me they contrast and compliment each other. Believe me the thought has crossed my mind and my labor is free to me , but the contrast between the two different looks (shiny/cast) still looks a lot better to me. I do prefer though, to smooth out spot welds etc like on the bat. boxes and fenders etc. Also the stamping stretch lines on the flywheel covers. They need smoothed because once you get really shiny paint on them they really look bad. Just another opinion.

[Log in to Reply]  [No Email]
two cylinders saves gas

10-07-2007 11:25:42




Report to Moderator
 Re: Tractors to shiny ? in reply to B-maniac, 10-02-2007 19:05:14  
It is only natural for a painter to want a prep area that is smooth so that the finished product looks better . Iv'e found it good in grinding the cast to get more rust off easier by getting down to shiny metal , this is not easy , but can be done. Helps with waxing and buffing final tractor no coarse cast to fight just smooth surfaces. WARNING The results of not having cast to contrast your sheetmetal may cause people to talk about and look at your tractor more .lol

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy