Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

2130 hydraulics question

Welcome Guest, Log in or Register
Author 
Shelby

09-11-2007 19:42:14




Report to Moderator

I recently purchased a 2130 for my son. It is in quite good condition. It has the 146 loader on it with the two factory lever mounted on the loader post pillar. My question is that the loader does not have a float position for the loader arm. What does one have to do to change it so it has float operation? Can the lines for the loader be unplugged and plugged into the 2 sets of hydraulics at the back of the tractor? The levers for the rear hydraulics seem to have a float position.
Thank you for any responses, I am rather new to tractor ownership.

[Log in to Reply]   [No Email]
Tx Jim

09-15-2007 04:25:24




Report to Moderator
 Re: 2130 hydraulics question in reply to Handsome Jim, 09-11-2007 19:42:14  
I agree with all Charlie stated about valve. Tx Jim



[Log in to Reply]  [No Email]
CharlieMc

09-14-2007 08:42:48




Report to Moderator
 Re: 2130 hydraulics question in reply to Shelby, 09-11-2007 19:42:14  
Hi, I have a float position on my JD1530's loader. It is part of the hydraulic valve. So I think you would need to a valve that includes the float position. Be sure the valve is for a closed-center system.

Hope this helps.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy