|
rancher1
08-29-2007 15:43:04
|
I was mowing with a double 7' Kosch, and it suddenly stopped, wasn't mowing hard, and it wasn't making any funny noises at all. The pto clutch slipped right away (the engine is 80+ hp, checked pto HP and it slipped at 65HP back when engine was put in, never used it for anything near that so figured it was good enough, nothing wrong with it then, few hundred hours ago). The shaft can be rocked back and forth now, less than a quarter turn both ways, then it just hits something solid, sounds like it's toward the middle of the tractor where it's hitting. Anyway, a few things I'll mention, the 540 shaft is the only one that's been used, I don't think the 1000 has ever been put in. The pto lever doesn't exactly feel right now either, used to feel smooth putting it in gear (tractor off), now it sort of feels like it might not be hitting gears right, a little metallic sound. Very barely pushing it ahead, tractor running, not engaging it, the shaft still turns until it hits the stop. I know the tractor needs split, I was thinking possibly a gear broke or something, but wondered if anyone had any other ideas. Thanks.
|
|
|
|