Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

A little JD related humor

Welcome Guest, Log in or Register
Author 
WeirdDeere

08-05-2007 17:42:51




Report to Moderator

I've finally figured out how to drive/operate my 70D without any problems

Brandon




[Log in to Reply]   [No Email]
Tyler-MO

08-08-2007 19:35:48




Report to Moderator
 Re: A little JD related humor in reply to WeirdDeere, 08-05-2007 17:42:51  
Brandon,
If I were you I"d submit that photo into Richard Hain at the Green Magazine. I"m sure that there are some folks out there who aren"t internet savvy that would enjoy your creativity.

Tyler in IL (used to be MO but I"ve moved)



[Log in to Reply]  [No Email]
DickD

08-07-2007 17:03:16




Report to Moderator
 Re: A little JD related humor in reply to WeirdDeere, 08-05-2007 17:42:51  
WD You would also be in high demand to drive the old B model Mack trucks with a duplex, triplex or quadraplex transmission. Neat picture!! DickD



[Log in to Reply]  [No Email]
Bill(Wis)

08-06-2007 20:45:23




Report to Moderator
 Re: A little JD related humor in reply to WeirdDeere, 08-05-2007 17:42:51  
Now that is really funny. And for something to be really funny it has to have some truth to it. Thanx. (:>))



[Log in to Reply]  [No Email]
njs

08-06-2007 09:03:33




Report to Moderator
 Re: A little JD related humor in reply to WeirdDeere, 08-05-2007 17:42:51  
No one mentioned how well you did adding your two other arms. Good Job!!



[Log in to Reply]  [No Email]
Mike M

08-06-2007 09:30:10




Report to Moderator
 Re: A little JD related humor in reply to njs, 08-06-2007 09:03:33  
You mean he wasn't born that way ? I thought maybe he lived up close to the Perry neucular power plant ? I didn't want to pick on him. Got to be PC these days ya know.



[Log in to Reply]  [No Email]
WeirdDeere

08-06-2007 11:12:23




Report to Moderator
 Re: A little JD related humor in reply to Mike M, 08-06-2007 09:30:10  
Thanks for trying to be nice, but I'm used to being picked on...it's alright.

But somehow, it's usually pretty easy to win fights when someone goes too far?

Brandon (Powered by Perry)



[Log in to Reply]  [No Email]
buickanddeere

08-06-2007 13:48:35




Report to Moderator
 Re: A little JD related humor in reply to WeirdDeere, 08-06-2007 11:12:23  
Ask Ol John T or myself. Brandon really does look that way. We seen him at NY Expo.



[Log in to Reply]  [No Email]
buickanddeere

08-05-2007 20:23:14




Report to Moderator
 Re: A little JD related humor in reply to WeirdDeere, 08-05-2007 17:42:51  
Instead of wasting talent,shouldn't you be holding a beer with the spare hand?



[Log in to Reply]  [No Email]
WeirdDeere

08-05-2007 20:56:37




Report to Moderator
 Re: A little JD related humor in reply to buickanddeere, 08-05-2007 20:23:14  
Nah, I'm gonna get one of those hats that holds the beverages on the side, with tubes for easy delivery to the mouth.

Brandon



[Log in to Reply]  [No Email]
Duane Larson

08-05-2007 19:44:20




Report to Moderator
 Re: A little JD related humor in reply to WeirdDeere, 08-05-2007 17:42:51  
Hi Brandon,
Your pix reminded me of my days as a kid driving Werner Dahlberg's WC Allis Chalmers on the threshing run. You get the picture - heading up a Wisconsin hill pulling a load of bundles one had to stop on demand by the next set of shocks to be loaded and that meant pushing in a STIFF clutch, flipping it out of gear as an 8 year old's leg was not strong enough to hold the clutch in during the shock loading, and grabbing the HAND brakes and holding on for dear life, all at the same time. Finally I figured out that just before stopping I would cramp the wheels and turn the tractor about sideways - then I only had to hold one brake. The WC had a long, floppy gearshift lever and only God knew what gear it was going in. As I recall we always pushed the lever down as reverse was up and hitting that gear would have been trouble. Then simultaneously pushing the clutch in while holding a brake, trying for a low gear, letting the clutch out and releasing the brake just as the clutch engaged and hoping it was in a gear that would pull the load..... - oh yes, did I mention having to steer also?
THAT was a rig that really required the extra arms!!

[Log in to Reply]  [No Email]
low budget

08-05-2007 18:42:41




Report to Moderator
 Re: A little JD related humor in reply to WeirdDeere, 08-05-2007 17:42:51  
Used to have a 60 with a 45 loader, required one more arm than you have to operate the trip bucket. Oh yeah, it was manual steering, better have two more arms. You needed two to steer when you had a load in the bucket not just one.



[Log in to Reply]  [No Email]
flying belgian

08-05-2007 19:21:18




Report to Moderator
 Re: A little JD related humor in reply to low budget, 08-05-2007 18:42:41  
I know what you mean. started cultivating as a kid with a 60 and front mount 4 row. Stop on end, raise cult., ride clutch ahead a wee bit, stand up and turn steering wheel a little, sit down and ride clutch ahead a little more. repeat process 15 more times then let cult. down and drive to other end. But before you get to other end you get drowsey and thinking you may have covered some corn you turn around to see if you did at which time you covered some more.

[Log in to Reply]  [No Email]
two cylinders saves gas

08-05-2007 17:46:44




Report to Moderator
 Re: A little JD related humor in reply to WeirdDeere, 08-05-2007 17:42:51  
I bet u can back right up to a wagon with that set-up .



[Log in to Reply]  [No Email]
two cylinders saves gas

08-05-2007 17:57:17




Report to Moderator
 Re: A little JD related humor in reply to two cylinders saves gas, 08-05-2007 17:46:44  
When are u going to paint that thing brandon ? It's begging for a new shiny coat of paint. Sheetmetal looks very straight on it from what i see.



[Log in to Reply]  [No Email]
WeirdDeere

08-05-2007 18:02:03




Report to Moderator
 Re: A little JD related humor in reply to two cylinders saves gas, 08-05-2007 17:57:17  
The sheetmetal is in great shape (only one SMALL ding in the grill screen). Too good to paint in my opinion...it has the original paint/decals, and I hate to cover it up. I have repainted a few underhood things (that were being repaired), but I really hate to touch the sheetmetal. I will have to eventually I guess...this is Ohio...and not a great climate for preservation.

Brandon



[Log in to Reply]  [No Email]
two cylinders saves gas

08-05-2007 18:07:33




Report to Moderator
 Re: A little JD related humor in reply to WeirdDeere, 08-05-2007 18:02:03  
We are close to a small town west liberty ohio but i work in dayton . You?



[Log in to Reply]  [No Email]
Christos

08-05-2007 18:47:21




Report to Moderator
 Re: A little JD related humor in reply to two cylinders saves gas, 08-05-2007 18:07:33  
I'm in fairborn next to the base, but I'm from Columbus - you're about 30 mins south of me.

Christos



[Log in to Reply]  [No Email]
WeirdDeere

08-05-2007 18:15:17




Report to Moderator
 Re: A little JD related humor in reply to two cylinders saves gas, 08-05-2007 18:07:33  
I live in Wellington, OH or thereabouts. Closer to the lake than you.

Brandon



[Log in to Reply]  [No Email]
Mike M

08-06-2007 04:53:34




Report to Moderator
 Re: A little JD related humor in reply to WeirdDeere, 08-05-2007 18:15:17  
Not to far away I'm down here in Jeromesville Ohio.



[Log in to Reply]  [No Email]
GPWT

08-07-2007 09:26:00




Report to Moderator
 Re: A little JD related humor in reply to Mike M, 08-06-2007 04:53:34  
Where in Jeromesville? I'm about 3 miles from there.



[Log in to Reply]  [No Email]
Larry806

08-06-2007 07:25:17




Report to Moderator
 Re: A little JD related humor in reply to Mike M, 08-06-2007 04:53:34  
Kenton Ohio



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy