Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Can I disable my MT hydraulic pump?

Welcome Guest, Log in or Register
Author 
RonWind10

07-29-2007 19:20:28




Report to Moderator

I'd like to take the hydraulic lines off my MT and just keep the pump connected. Can I simply remove the lines and seal the holes with an appropriate plug and not damage the pump?

Thanks!




[Log in to Reply]   [No Email]
RonWind10

07-31-2007 20:58:59




Report to Moderator
 Re: Can I disable my MT hydraulic pump? in reply to RonWind10, 07-29-2007 19:20:28  
Thanks for all the responses!
As for why I want to disable, or rather,
by-pass, my hydraulic pump is to remove those big lines from front to back. Mostly for aesthetic reasons. I"m not planning on using my MT for work. Just ride around fun and such with maybe the occasional antique pull. Would I be able to put a jumper hose to let the fluid still circulate between the high and low pressure sides?

[Log in to Reply]  [No Email]
tstex

07-30-2007 05:59:31




Report to Moderator
 Re: Can I disable my MT hydraulic pump? in reply to RonWind10, 07-29-2007 19:20:28  
Gentlemen,

Wilamayb brought-up an excellent point to ask "how the pumps gets it pressure"?

When i rebuilt my MT TOM unit, i removed the pump and split it...there is a gear in there that works with the camshaft. If you did remove the pump, would removing that gear play into the rest of the engine's timing or dynamics? That pumps is always producing about 150-200psi in the "rest mode" That is why the arms always go up even when the control arms are down. Any thoughts?

However, if you did remove the pump, you would need to get a whole new set of bolts with different length shafts to secure the plate. [the current ones consider the pump thickness] Next, i would also cut a gasket with "the plate" too. I do not think deere has the part number.

Finally, as asked before, why do you want to remove the pump? I restored all 4 parts of my MT with a total of about 150 buck and it works like brand new...it is also a great way to get on the tractor! ;-)

Regards,
tstex

[Log in to Reply]  [No Email]
wilamayb

07-30-2007 05:31:55




Report to Moderator
 Re: Can I disable my MT hydraulic pump? in reply to RonWind10, 07-29-2007 19:20:28  
No, I wouldnt think that would be a good idea for the following reasons:

As Mike said it wont have any oil coming in for cooling and lubrication.

Second that pump is designed for "open Center" hydraulics which means that it pumps oil all of the time and does not have the ability to sense load. I'm certain that you would blow the seal out the front of the pump as the oil would have nowhere to releif. The pressure in the pump would be at much higher pressures than normal.

I'm not really a Dubuque man, but I'm not sure if you can run your tractor after you remove the pump or not. Is there not a gear pressed on the front of the pump? If so is it necessary for engine timing? I dont have a parts book for any Dubuque tractors so you might consult the parts book to check for which gears are necessary before starting the engine after you remove the pump.

So I just gotta ask. Why are you wanting to rid yourself of hydraulics?

[Log in to Reply]  [No Email]
Mike M

07-30-2007 04:48:45




Report to Moderator
 Re: Can I disable my MT hydraulic pump? in reply to RonWind10, 07-29-2007 19:20:28  
I would not run that pump with the lines unhooked and blocked off. How will get get lubed ? Just pull the whole pump off and make a flat steel plate to cover the hole in the timing cover.



[Log in to Reply]  [No Email]
ram ranch

07-29-2007 20:57:07




Report to Moderator
 Re: Can I disable my MT hydraulic pump? in reply to RonWind10, 07-29-2007 19:20:28  
Yes you can.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy