Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Deere H baler options

Welcome Guest, Log in or Register
Author 
farmerwannabe

07-28-2007 13:15:17




Report to Moderator

Hi all..just wondering what square balers a Deere H could handle? I"m looking at buying an H locally because our little Allis B is just too small to try and hook a baler to, even for the small acreage we have.

Thanks!




[Log in to Reply]   [No Email]
Bob in NH

08-01-2007 21:50:11




Report to Moderator
 Re: Deere H baler options in reply to farmerwannabe, 07-28-2007 13:15:17  
We have a 42H that has lived her on the farm since new. It was the only tractor my dad had when he farmed. We never had a baler until after he died and I moved back. On more than one occasion, my wife and kids were picking up hay with the 8N that we normally baled with, a storm was coming up, and I hitched the Ford 250 PTO baler to the H and baled a decent amount of hay.

It all depends on baler size. The Ford 250 is small and was designed to run with an 8N or 600 Ford. The H is marginal at best, but will do it.

My advice - get a bigger tractor with live PTO - I now have a 2010D - what a difference. I still hook up the 44A regularly because I like it, BUT!!

Just my 2 cents.

[Log in to Reply]  [No Email]
farmerwannabe

07-29-2007 10:29:10




Report to Moderator
 Re: Deere H baler options in reply to farmerwannabe, 07-28-2007 13:15:17  
Thanks for the replies...and the advice. I"ll stay clear of trying my luck with the H and a baler. Now to find a bit larger antique to bale with. I REALLY enjoy these older tractors...and the great people I meet with them.



[Log in to Reply]  [No Email]
pawel

07-29-2007 06:56:00




Report to Moderator
 Re: Deere H baler options in reply to farmerwannabe, 07-28-2007 13:15:17  
You want about 40 horse to square bale, possibly 30 if you treat it right and don't try to pound the bales through it. Personally if you have real farm work to do, buy a utility JD for the farm work and use your antiques for light jobs like pulling wagons etc.



[Log in to Reply]  [No Email]
ET

07-29-2007 04:06:21




Report to Moderator
 Re: Deere H baler options in reply to farmerwannabe, 07-28-2007 13:15:17  
The only way is to find a baler with its own engine.



[Log in to Reply]  [No Email]
dan hill

08-07-2007 03:04:50




Report to Moderator
 Re: Deere H baler options in reply to ET, 07-29-2007 04:06:21  
I have a photo of a farmall cub pulling a n engine powered baler.Find a JD B or 50.A farmall H makes a good baling tractor.



[Log in to Reply]  [No Email]
dan_41jdh

07-28-2007 19:32:20




Report to Moderator
 Re: Deere H baler options in reply to farmerwannabe, 07-28-2007 13:15:17  
I completely agree with Mike M.

Just for fun, I once hitched my H to my neighbor's New Holland hayliner (pto powered), and baled up an acre of first-cutting alfalfa.

Never again.

The poor little H didn't give up, but it struggled terribly. There were a couple of especially heavy areas - the baler handled it fine, and could have handled more, but even in 1st gear, the H was losing ground - and without live power, it was in deep trouble. Didn't dare pull the clutch with the feeder full, because the H would never be able to get the baler started again without digging all the hay out of the feeder. Fortunately, the H pulled through, but it was totally out of its class for this type of work. And, the hay field was dead level, so the drawbar load very almost nil.

So, although the H is OK for mowing, cultivating, and moving empty wagons around, it just doesn't have what it takes to run a baler. And without live power, the performance is just that much more dismal.

[Log in to Reply]  [No Email]
Mike M

07-28-2007 15:53:41




Report to Moderator
 Re: Deere H baler options in reply to farmerwannabe, 07-28-2007 13:15:17  
I'm thinking that JD H is smaller and less HP than that Allis B ???? You better look for something bigger and with live pto like a model 50 or 60 !



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy