Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

4010 hydraulics weak when hot?

Welcome Guest, Log in or Register
Author 
TimS in Mo

07-12-2007 10:17:28




Report to Moderator

The hydraulics on our 1963 4010 lose power once the tractor is up to normal temperature...

The steering and brakes are fine, the 3ph still functions but slows down quite a bit, a cylinder hooked to one of the scv's that raises the cutter bar on our disc mower can't lift the bar by itself, I have to go give it a hand.

I can still run the baler, as it doesn't take that much hydraulic force to run the twine arm or open and close the tail gate...but it all operates slowly....

The fluid is fresh, the filter is fairly new, and the screen I just cleaned yesterday....

The brakes are needing replacing on this tractor, so I have to keep cleaning the screen, I wonder if some particles small enough to get thru the screen have plugged the trans filter..

[Log in to Reply]   [No Email]
TimS in Mo

07-12-2007 10:53:12




Report to Moderator
 Re: 4010 hydraulics weak when hot? in reply to TimS in Mo, 07-12-2007 10:17:28  
Thanks G/Man...

I plan on replacing the brakes as soon as I get a chance....until then I guess I will keep cleaning the screen and maybe try a new filter.



[Log in to Reply]  [No Email]
G/MAN

07-12-2007 10:50:07




Report to Moderator
 Re: 4010 hydraulics weak when hot? in reply to TimS in Mo, 07-12-2007 10:17:28  
That's possible, and it's also possible that small particles have made their way into the transmission pump and caused wear there. The tranny pump is the first stage in the hydraulic system, and supplies the charge oil to the main pump. If the tranny pump flow isn't up to spec, the rest of the system will suffer. Trans pump flow can be checked by tapping into the main pump supply line on the LH side of the tractor with a flowmeter. Also possible is an internal leak at the rockshaft valve, an SCV box, the plate on the bottom of the rockshaft housing, etc that's dumping a lot of oil out of the system. Get the oil good and hot, remove the round plug on the rear of the differential housing to the right of the center-link bracket, and look in there with a flashlight. Some oil leakage is normal, gushing waterfalls of oil are not. And yes, if the screen is continually plugging, try a new filter. The screen will let through a lot of small particles that the filter will catch.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy