Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

3020 parking cog

Welcome Guest, Log in or Register
Author 
PapaJohn

06-22-2007 19:19:35




Report to Moderator

The parking cog on my 3020 powershift won't hold on a hill. What's involved in the repair?




[Log in to Reply]   [No Email]
Mike M

06-23-2007 04:01:12




Report to Moderator
 Re: 3020 parking cog in reply to PapaJohn, 06-22-2007 19:19:35  
That is my main complaint about the power shift tranny. If you are pointing one way on a hill it goes in and locks tight you can't get it out the other way it may not go in all the way and slip out.

Free up all the linkage/cable and adjust it and replace any worn parts like pins and bushings and see if you can help it.



[Log in to Reply]  [No Email]
Gerald J.

06-22-2007 19:34:54




Report to Moderator
 Re: 3020 parking cog in reply to PapaJohn, 06-22-2007 19:19:35  
Its not so much of a cog as putting the transmission into two gears simultaneously with the cams.

Check the linkage between the dash and the transmission to be sure its getting into each of the gears all the way as well as into park.

Gerald J.



[Log in to Reply]  [No Email]
Bob

06-22-2007 21:09:21




Report to Moderator
 Gerald J.... in reply to Gerald J., 06-22-2007 19:34:54  
Actually, the powershifts DO use a parking pawl, Key # 7, in the drawing.

Third Party Image

You are thinking of the Scynchro Range tranny park mechaism that "catches" two ranges at once to lock the tranny when in park.

PapaJohn,

The cable that operates the cam can get out of adjustment, or sticky, as well as the pawl getting damaged.

There are a couple of changes that were made with the lever, and a couple of internal parts.

IIRC, there are some updates. You MIGHT find something in the archives (IF this site had a consistently-working search function), or, perhaps someone who remembers the details of the updates will jump in here.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy