Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

FFA class restored a 7520

Welcome Guest, Log in or Register
Author 
Gary from Mules

06-16-2007 04:38:09




Report to Moderator

I notice an ad for a 7520 in the photo ads and it made me think of the FFA class in the local area that restored an 8640 as a class project. These kids done a great job on this tractor. They had to rebuild the engine and trans. as well as put some new gears in the rear end. Then they repainted the entire tractor, if my memory serves me correctly this was a cab off repaint. Looked sharp at the Texas Plains Two Cylinder show this past March. Just wanted to share that with ya. It's good to see our youth taking an interest in these type of projects.

[Log in to Reply]   [No Email]
CRUSADER

06-16-2007 11:10:09




Report to Moderator
 Re: FFA class restored a 7520 in reply to Gary from Muleshoe, 06-16-2007 04:38:09  
Howdy Gary,

Where is/was that show at? Living here in Abilene it wouldn't be that far of a drive for me, plus I make regular trips through the Panhandle on my way to Clovis to visit the wife. Seems I've missed the few shows I've known of because of one thing or another, but hopefully one of these days I'll make one of them. I wanted to go to the one in New Mexico last May but the wife had other plans.

How's the MM project coming? Have you got it out of the silage pit yet? Let me know if you need a hand, I've got the GMC sitting in the shed in Clovis and it probably could use a little exercise if you need help pulling it out of there or hauling it (I don't have a trailer yet but it does have the tow package) we could hitch a trailer and see how it handles. LOL, it seems that the old Corsica can save me about $35-$40 on a trip by driving it instead of the 3/4 ton 4WD GMC diesel and at the price of fuel and number of miles I'm driving that really adds up and quick. I'll keep the pickup for use as needed and drive the car for commuting.

[Log in to Reply]  [No Email]
Gary from Muleshoe

06-16-2007 12:27:20




Report to Moderator
 Re: FFA class restored a 7520 in reply to CRUSADER, 06-16-2007 11:10:09  
The show was in Plainview, they have every year at that time. Sponsored by the Texas Plains Two Cylinder Club. These FFA kids also had a JD LA that they had put a 283 ci Chevy engine in it. Said it got a bit squirrely at high speeds.

Don't have the MM U home yet but getting ready to in July I think. A buddy of mine here in Muleshoe is going to take his M Farmall over and yank up on the road so we can load. I let you know we may need all the help we can get. Might need someone to run the rattlesnakes off for us. (LOL) Gas is going back down here again a bit anyway, Muleshoe is $2.96 and I heard Lubbock is at $2.89. When I go to Dallas it is usually cheapest there in Abilene. Speaking of Dallas I may be going there in July for some training for my job. I give you a call if I do and we can get glass of ice tea somewhere. Don't blame you for keeping the GMC man needs a truck when you are playing old tractors. Take care
Gary

[Log in to Reply]  [No Email]
CRUSADER

06-16-2007 14:03:23




Report to Moderator
 Re: FFA class restored a 7520 in reply to Gary from Muleshoe, 06-16-2007 12:27:20  
Howdy Gary,
Glad to hear back from you. Let me know and I'll try to give you hand with it, although I am not found any snakes much less rattlers. With me it's shoot first and ask questions later to find out if they are freindly or not. Plus I'll start doing undershirt duty starting July 9 for six months (or until they get another shirt) and we both know what kind of free time a person can have doing that job. As far as keeping the GMC, I have no plans of selling it and if I did sell would probably take a very bad beating. It's an 07 model that I bought brand new last October. It's got 9900 miles on it so it's basicly a new truck that would sell at a used truck price. Plus I really like it a lot. I wanted a used one, but the boss lady wouldn't even look at what I liked much less go for a ride in it. Found a new one like I wanted (reg cab with long bed) and she still didn't like it. Sat her in this on the lot with the ext. cab, long bed and power seat and she seamed okay with it. According to her "it's my pickup" but it's got all the fancy stuff I didn't really want and seemed to have to have even if she won't drive it. Plus that 92 Corsica doesn't cost much to operate and couldn't sell it for very much if we were to try to sell it.

Anyway that MM U may be an interesting project to play with. When looking for parts you may try Marc Johnson over at Gap Tractor Salvage in Cranfill Gap, Texas. Haven't spoke with them, dealt with them, or been there in many years, but do know that they do or did have serveral MM's on the yard (I hauled a few of them in there when I was working at one of the garages in Waco) and they were always more than fair to deal with. Have never heard or heard of anyone saying they got a bad deal from them.

Gas prices here in Abilene are starting to go down also and are a lot cheaper than in Clovis. If possible I try to make it to at least Muleshoe if not Lubbock before buying fuel. Have seen them at 2.89 a gal. at many places and on base. Diesel just hit the 2.79 a gal accross the street here at Skinny's which is the cheapest I have seen it in a long time and if you buy over at the Flying J on I-20 it sells for 2.66 cash price. If you stop by and have time or I am not sleeping or at work (these 4 on / 3 off 12-hour shifts can cause you to sleep most of the day), maybe I can get you a tour of the load barn. LOL, it's a little different than the 111's or the 16. They have a trainer set up. Also that bay is a ways up there...glad my loading days are over sometimes when I look at it. But would still like to give some of these young 'uns a run for their money.

Take care and stay in touch.
Jim

[Log in to Reply]  [No Email]
Gary from Muleshoe

06-16-2007 04:39:47




Report to Moderator
 Re: FFA class restored a 8640 in reply to Gary from Muleshoe, 06-16-2007 04:38:09  
It's early am here, brain is not running at 100% just yet. Sorry about the title on first post.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy