Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Exhaust man.

Welcome Guest, Log in or Register
Author 
MSS3020

06-04-2007 08:31:16




Report to Moderator

Replacing the exhaust Man on my 3020 john deere. THere is what i call the intake that bolts on to the head and has a couple of blocks that you turn 90 degrees to get heat to the carb in the winter or turn back for summer. The new one I just got doesnt have a piece of steel welded on the top to help support the intake. Is this something that needs to be grinded off and braissed bach on the new one or can the intake support itself without this. I dont kknow if this is clear enough or not. I hope so.

Scott

[Log in to Reply]   [No Email]
HTR

06-04-2007 18:56:47




Report to Moderator
 Re: Exhaust man. in reply to MSS3020, 06-04-2007 08:31:16  
I've installed a couple of those after market manifolds. The intake is plenty strong enough to support its self without the top bolts. I did have to grind some of one ear, where it bolts to the head, as it was not properly cast.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy