Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

pistons

Welcome Guest, Log in or Register
Author 
bigblock

05-31-2007 19:24:15




Report to Moderator

Why ,on the 730 gas,do they skip the .090 overbore? You can only buy std,.045,and .125 ,unless it's a diesel.




[Log in to Reply]   [No Email]
Earl-IL

06-01-2007 18:50:12




Report to Moderator
 Re: pistons in reply to bigblock, 05-31-2007 19:24:15  
I called Jerry Hinrichs today & asked him what he had available for the 730 gas . He said he had .045,.090 &.125 in stock. $545.00 for piston,pins & rings.His pistons are Made In The USA He said 5 yrs ago everybody wanted a little higher comp piston. His pistons are flat top . He is not going to change his patterns and go back to the "D" cup piston. He has had a lot of calls on the eyebrowed LP piston.His phone # 815-778-1900 Illinois. Earl

[Log in to Reply]  [No Email]
F-I-T

06-01-2007 03:24:34




Report to Moderator
 Re: pistons in reply to bigblock, 05-31-2007 19:24:15  
My guess is that over the years, people ran bores too long between ring jobs, deforming the bores so much that they had to skip to the .125" over so often that the demand for after-market pistons just wasn't there for the .090" size now in the later years. I'm pretty sure JD itself only ever offered .045", suggesting that you replace the block when it was worn beyond a .045" re-bore. The old rule of thumb was standard bore, one ring and hone, re-bore, one ring and hone. So that covered many thousands of hours before a block replacement should have been needed.

Frank

[Log in to Reply]  [No Email]
Mike M

06-01-2007 09:42:47




Report to Moderator
 Re: pistons in reply to F-I-T, 06-01-2007 03:24:34  
Frank; I'm thinking that the model D was Deere's one exception ( Deere always seems to have at least one )in that they did offer some larger than .045 I'd have to check to parts book to see which sizes .



[Log in to Reply]  [No Email]
WeirdDeere

06-01-2007 10:40:03




Report to Moderator
 Re: pistons in reply to Mike M, 06-01-2007 09:42:47  
There were .045, .090, and .125 oversize pistons available from Deere for the D. Even .003 and .005 oversize piston pins. I seem to also remember kits to replace the early rear wheels when the splines got wore out! I think they knew they'd get the guts worked out of them OVER and OVER!

Brandon



[Log in to Reply]  [No Email]
EXCEPTION TO THE EXCEPTIO

06-01-2007 10:05:08




Report to Moderator
 Re: pistons in reply to Mike M, 06-01-2007 09:42:47  
I just remembered the model H oversize was only in .030 Mike M



[Log in to Reply]  [No Email]
F-I-T

06-01-2007 11:29:15




Report to Moderator
 Re: pistons in reply to EXCEPTION TO THE EXCEPTIO, 06-01-2007 10:05:08  
If you dig deeeper, you'll find the "D" offered STD/045/090 when the bore was 6 1/2", then they offered STD/045/090/125 when the bore was increased to 6 3/4". The GP first offered STD/045/090 until they increased the bore to 6", when they dropped back to STD/045 only. So, with the exception of the "D" and the early GP, all Waterloo models, including the diesels, had only one overbore size provided for as factory replacement parts, that being .045", excepting the "H" which had one overbore at .030", and only the "D" after '38 (I think it was), ever offered a .125" overbore. Any other sizes installed over the years came from an aftermarket provider and not the factory.

My original point was that Deere "generally" offered only one shot at a rebore before you had to buy a replacement block. The fact that users thought there was a lot of meat left in the bores and a reluctance to toss a block formed the demand that drove the after market to provide the larger (090/125) sizes that are taken today as having come from Deere, and that is not true. Then there was the further option of installing a Power Block from TSC, and a lot of people did just that. My uncle used a Power Block '49 "A" for many years for his major load tasks on his farm in Ohio, and with a turned out load screw it did a lot of work, but it sure liked its gas. He was embarassed when I worked our 70 Diesel beside it all day and still went home with fuel in the tank, and he had refueled three times.

[Log in to Reply]  [No Email]
buickanddeere

05-31-2007 22:18:14




Report to Moderator
 Re: pistons in reply to bigblock, 05-31-2007 19:24:15  
Link



[Log in to Reply]  [No Email]
Earl-IL

05-31-2007 19:55:18




Report to Moderator
 Re: pistons in reply to bigblock, 05-31-2007 19:24:15  
I didn't know they did .Did you try other suppliers?? Earl



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy