Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Dumb question on epoxy primer

Welcome Guest, Log in or Register
Author 
Nylon

05-23-2007 20:51:15




Report to Moderator

I have seen posts on epoxy primer. Wondering how tough that stuff is to work with. Does it gum up a cupgun? Regular laquer thinner able to clean up? Is it the right way to go?




[Log in to Reply]   [No Email]
F-I-T

05-24-2007 04:19:28




Report to Moderator
 Re: Dumb question on epoxy primer in reply to Nylon, 05-23-2007 20:51:15  
third party image

I use PPG DP90/40 or Transtar epoxy primers, easiest to work with that I have found, I use'm both a gravity or cup gun, cleans up with lacquer thinner, and I would not use anything else. My 70D has epoxy primer, and PPG green and DuPont yellow acrylic enamel, with a clear coat after color sanding.

[Log in to Reply]  [No Email]
B-maniac

05-25-2007 19:04:57




Report to Moderator
 Re: Dumb question on epoxy primer in reply to F-I-T, 05-24-2007 04:19:28  
Nice job , Frank! I get a lot of flak on the paint forum for recommending the very system and brand you used. Glad to see at least some use the best ,on the best.



[Log in to Reply]  [No Email]
F-I-T

05-26-2007 03:38:20




Report to Moderator
 Re: Dumb question on epoxy primer in reply to B-maniac, 05-25-2007 19:04:57  
Well, I can't take all that much credit. I started on here about 7 or 8 years ago asking questions. I had sprayed old synthol as we all did years back, but I wanted something that might last better in the UV of Florida. My brother-in-law has painted for years and he gave me some pointers, helped me set things up for safety, and then encouraged me to practice. My local paint supply has a couple of good guys who were happy to answer my questions, not to mention sell me tons of stuff!

I know from experience, that paint is a system, and it doesn't make much sense to try to mix a primer with a finish that two different companies developed, because between the two of them they have a lot more chenistry know-how than I do.

I haven't used a BC/CC, but I think that wouldn't be too hard to adapt to, just haven't had any object to paint. I'm still working on my buffing skills, but all in all, I feel I could paint just about anything. Folks don't want to hear it, but it's all in the prep. The bodywork is tough, the cleaning is demeaning, and after all that time, they shoot it up with some synthetic enamel that was obsolete 35 years ago when acrylic lacquer came out. I might use synthol on something that I just want to coat and not care about in a 2 or 3 years, but if it is going to work for a living or sit in the sun a lot, it's got to have a decent autmotive finish. The other thing that I found is that even if you are on a tight budget, there are acrylic enamel products out there that are actually less expensive (Limco 1-2-3 and some Omni) than something like the John Deere brand synthetic enamel. So, like I said there's a place in the shop for synthol, maybe even on a showpiece that never sees dirt or sun, but if you want tough paint like that on your car, you need to pony up the money and buy the right stuff, and apply it right.

Frsnk

[Log in to Reply]  [No Email]
nylon

05-24-2007 21:40:41




Report to Moderator
 Re: Dumb question on epoxy primer in reply to F-I-T, 05-24-2007 04:19:28  
Yeah what he said. That is such a nice looking rig it is almost painful to look at.



[Log in to Reply]  [No Email]
bigblock

05-24-2007 19:13:01




Report to Moderator
 Re: Dumb question on epoxy primer in reply to F-I-T, 05-24-2007 04:19:28  
FIT,let's see some more pics of that fine 70!



[Log in to Reply]  [No Email]
F-I-T

05-25-2007 04:31:04




Report to Moderator
 Re: Dumb question on epoxy primer in reply to bigblock, 05-24-2007 19:13:01  
I did this one several years ago. It's an original from my Dad's farm in Ohio. At 7,000 hours, she was flat worn out. I posted it as an ongoing "Project 70D", starting back in 2001 and everyone got in the act, giving me advice and helping locate parts, etc. You can still search the archives for different parts of the story. I met a lot of very nice people on the board as a result of rebuilding that old clunker. That's how I came to know quite a bit about Powr-Trols, powersteering, and painting.....I had every nut and bolt loose on this critter. I normally have photos on my webpage, but I changed services, and they lost my back up file, so I decided to re-write the page and it is not coming as fast as I had hoped (that darn thing called "work" keeps getting in the way), but it will be back up, including old and new "How-to" articles, and photos of my shop buddies, tractors, projects in process, and my new shop.

Frank

[Log in to Reply]  [No Email]
Kurt_JDB

05-24-2007 04:06:29




Report to Moderator
 Re: Dumb question on epoxy primer in reply to Nylon, 05-23-2007 20:51:15  
Nylon,

I am new to the automotive type paint game, and all the advice I have received has recommended using epoxy primers, especially if you are painting cast iron. I have had no particular trouble using ppg epoxy primers, even though I am inexperienced at spray painting. Particular care must be taken to mix the paint correctly, follow directions, and make sure are the parts and air are at the right temperature. Depending upon the epoxy primer type, the pot like can be from 8 to 24 hours. I have had no trouble at all cleaning the gun and other parts with laquer thinner. Of course you don"t want the paint to set up before you clean it. It"s good stuff. Good luck.

Kurt

[Log in to Reply]  [No Email]
flying belgian

05-24-2007 03:07:23




Report to Moderator
 Re: Dumb question on epoxy primer in reply to Nylon, 05-23-2007 20:51:15  
very tough. yes. no. no.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy