Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Power troll dummy plugs ?

Welcome Guest, Log in or Register
Author 
northeast pulle

05-21-2007 14:04:37




Report to Moderator

I picked up an extra set of Power troll dummy plugs with screw on covers at a swap meet this weekend. I now have one set in each tractor and one set with the covers in the holders on each tractor for show. Are the plugs all the same length for the A,B, and G ?Do they also fit the 50,60,70 and 20 and 30 series? Or are they all different. Thanks for any info.

North East puller.




[Log in to Reply]   [No Email]
northeast puller 1

05-22-2007 08:07:29




Report to Moderator
 Re: Power troll dummy plugs ? in reply to northeast puller 1, 05-21-2007 14:04:37  
Thanks for the info.

NorthEast puller



[Log in to Reply]  [No Email]
Mike M

05-21-2007 19:31:19




Report to Moderator
 Re: Power troll dummy plugs ? in reply to northeast puller 1, 05-21-2007 14:04:37  
The plugs for a G and 70 had 3/4" pipe threads so you could flow a larger volume of oil and the others used 1/2" pipe threads.

Good chance at the show they will grow legs and walk off.



[Log in to Reply]  [No Email]
F-I-T

05-21-2007 20:08:50




Report to Moderator
 But he asked about Dummy plugs.... in reply to Mike M, 05-21-2007 19:31:19  
He was talking the non terminated "dummy" plugs which were the same across the models. Plugs for the cylinders are another matter.



[Log in to Reply]  [No Email]
Mike M

05-22-2007 04:50:17




Report to Moderator
 Re: But he asked about Dummy plugs.... in reply to F-I-T, 05-21-2007 20:08:50  
Misread that one .LOL

There are 2 totally different type of "dummy" plugs. 1 type for use with the eariler design that used a shear washer and knurled retainer nut and the other type for the little later tractors that has the release lever.

20 and 30 series used the "today standard" ISO type pioneer coupling and a solid dust plug on a chain.



[Log in to Reply]  [No Email]
F-I-T

05-22-2007 05:06:20




Report to Moderator
 Re: But he asked about Dummy plugs.... in reply to Mike M, 05-22-2007 04:50:17  
Yup. And I listed those part numbers in the response below. Looks like the lever type Powr-Trol came out around the time of the "R", but I do not know a date of introduction since the serial number tract is by P-trol unit, nut by tractor S/N.



[Log in to Reply]  [No Email]
F-I-T

05-21-2007 15:33:52




Report to Moderator
 Re: Power troll dummy plugs ? in reply to northeast puller 1, 05-21-2007 14:04:37  
>>>Are the plugs all the same length for the A,B, and G ?Do they also fit the 50,60,70 and 20 and 30 series? Or are they all different.>>>

The plugs used on the A/B/G Powr-Trol are the "shear washer" variety, held on with large, round, knurled nuts. They were designed to shear the hold in "E" washer in the event a towed implement struck an object and unhoooked from the tractor hitch latch. The plugs were AA4980 and the screw on cover was A3255.

The improved plugs were introduced on the "R" Diesel, and continued on with the 50/60/70. The plugs were retained with spring-loaded pins so that if the plug were pulled out, you didn't lose a shear washer, but you still lost your oil as before. The plugs were AA4981 R, and the caovers were A 3616 R.

[Log in to Reply]  [No Email]
Kurt_JDB

05-21-2007 17:19:53




Report to Moderator
 Re: Power troll dummy plugs ? in reply to F-I-T, 05-21-2007 15:33:52  
Fit,

The late styled A and B also had the later design plugs. Changed over in 50 or 51? Don"t know about the G.

Kurt



[Log in to Reply]  [No Email]
F-I-T

05-21-2007 17:53:04




Report to Moderator
 Re: Power troll dummy plugs ? in reply to Kurt_JDB, 05-21-2007 17:19:53  
Yes, you sure are right. I seem to always forget about the late, late, styled lettered tractors. Since the cut-over was by P-trol box serial number, I can't seem to make it stick in my head when the cut over occurred. And I thought I was doing good to include the "R"!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy