Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

3010 Nebraska test

Welcome Guest, Log in or Register
Author 
ram ranch

05-17-2007 17:59:30




Report to Moderator

Dos anyone know why the 3010 was tested with 13.9-36 tires at the Nebraska tractor test? When every one runs 38 inch wheels, it just dosn't make any sence.Why not 14.9-38,13.6-38s, or 12.4-38s? Why 13.9-36? that's what they where putting on As and Bs in the late 30s, and also 530s, but this(3010) was a 55 horsepower tractor.The 70 was a 50 horse tractor tested with 13.00-38s(14.9-38).Was John Deere unsure of there tractor to under size the tires? Can any one explain?

[Log in to Reply]   [No Email]
JHEITKEMPER

05-18-2007 17:14:20




Report to Moderator
 Re: 3010 Nebraska test in reply to ram ranch, 05-17-2007 17:59:30  
THE DIESEL 3010 IS A GOOD TRACTOR,,BUT , Had a 3010 gasser built in 1960 ,,real power wonder ,,Always wondered why it had none, it came with 36 in wheels ,we welded 38 rims right to the 36 wheels ,, workedfine ,,,,, To keep the gasser running ,, I would have to change the manifold heat blocks around from summer to winter settings ,Change to hotter plug ,,Always adjust fuel jet on Zenith carb to fit the needs of the job ,,That tractor ran a lot on 2 cylidars when it first started and when it came here ,,WHEN IT LEFT SHE RAN LIKE A TOP . idling it would blow the prettiest smoke -rings ,, Today each one would probably cost a nickle a peice ..MY 2cENTS

[Log in to Reply]  [No Email]
ram ranch

05-17-2007 19:33:55




Report to Moderator
 Re: 3010 Nebraska test in reply to ram ranch, 05-17-2007 17:59:30  
I know they are a gutless wonder but why did John Deere do this? standard tires on a 630 and 730 where 12.4-38, 13.6-38. Was John Deere disapointed in the testing of the 3010, that they put 13.6-36 on them. There were test done with the 30 series(two-cylinder)tractors that had 36 inch wheels too. Was John Deere at the limit with the two-cylinder motor, so to make them pull more,they put smaller diameter wheels on them to make up some extra Horse?

[Log in to Reply]  [No Email]
wolfman

05-17-2007 18:57:13




Report to Moderator
 Re: 3010 Nebraska test in reply to ram ranch, 05-17-2007 17:59:30  
They likely tested it with the small tires/wheels so it could pull itself. 3010's were grossly overrated. The 59 hp happened at the PTO with engine revved at 2500 rpm but the tractor got 540 PTO at 1900 rpm. Do the math and at 540 rpm the 3010 was about a 44 hp unit. I've had a 3010D for 20 years with 15.5-38's, even gave it a new JD motor kit-handy tractor but can hardly pull itself. Never use it if you're in a hurry. A good Super M or WD-45 or 460 just simply have more smoke than the 3010. I've put all four on the chopper and the 3010 comes in a distant fourth.

[Log in to Reply]  [No Email]
Stonecreek

05-17-2007 18:41:24




Report to Moderator
 Re: 3010 Nebraska test in reply to ram ranch, 05-17-2007 17:59:30  
I owned a 3010 Diesel many years ago equipped with 13.9x36 tires. I assume that those were standard on them. I can also tell you that replacements were hard to find, at least in my part of the world. NOW I've got a 2240 eqipped with even scarcer 12.4x36's; just hope they don't give out on me.

I don't recall the tires limiting the 3010's field capabiity (60 horses at the pto). One great thing about that tractor was fuel consumption. I always tried to remember to fill it up once a month whether it needed it or not. Compared to a 4020 you'd swear that 3010 MADE more diesel the longer you ran it. With a 4020 you could always quit an hour before dark with the excuse that you were just about to run out of fuel. With the 3010, you'd better be prepared to run all night, because that tractor just refused to run out of fuel.

[Log in to Reply]  [No Email]
IaRalph

05-18-2007 06:33:51




Report to Moderator
 Re: 3010 Nebraska test in reply to Stonecreek, 05-17-2007 18:41:24  
I always thought that the 3010 and 4010 used the same sleeves and pistons, just 4 instead of 6. So if it had the same motor than why would one be more efficient than the other?



[Log in to Reply]  [No Email]
ram ranch

05-18-2007 06:44:58




Report to Moderator
 Re: 3010 Nebraska test in reply to IaRalph, 05-18-2007 06:33:51  
uhh lets see 2 more pistons? 253.9 cubic inches compared to 380.8 cubic inches? 55 horse compared to 80 horse? I really don't know why one would be more efficient than the other? Maybe it take more fuel to make more horsepower?



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy