Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

3020 hyd oil leak

Welcome Guest, Log in or Register
Author 
Regan

05-09-2007 19:31:17




Report to Moderator

I recently sold a late model 3020 , and the guy that I sold the tractor to tells me there is a massive oil leak in the clutch housing. My IT repair manual tells me that the PTO is hydraulicly assisted to allow for smoother engagement. This tractor has the PTO lever on the left side of the steering colume. Could there be a valve inside the the clutch housing, or a hose or something? I would appreciate some input. Thanks in advance.

[Log in to Reply]   [No Email]
Regan

05-12-2007 19:24:35




Report to Moderator
 Re: 3020 hyd oil leak in reply to Regan, 05-09-2007 19:31:17  
Bob Thans for the info. Sorry I didnt get back to you sooner, but just got too busy. I'm sure this will be valuable information when we get to repairing the leak.



[Log in to Reply]  [No Email]
Bob

05-09-2007 21:59:08




Report to Moderator
 Re: 3020 hyd oil leak in reply to Regan, 05-09-2007 19:31:17  
"the PTO is hydraulicly assisted to allow for smoother engagement"

NO "hydraulic assist" there... it's simply 100% "hydraulically operated".

Does it only leak when the PTO is engaged?

If so, it is likely the apply piston seals are shot, and the pistons aren't the best, either.

There's a whole bunch of things that are involved in accelerated seal and apply piston wear, from valve adjustment to clutch finger adjustment.

There are updated PTO clutch fingers available, as well.

Third Party Image

The apply pistons are Key # 11, the seal is Key # 10, and the backup ring is Key # 9, the updated, weighted clutch finger is # 7.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy