Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

4020 hydraulics

Welcome Guest, Log in or Register
Author 
Toby Woodmore

05-05-2007 04:29:06




Report to Moderator

Have a 67 4020 syncro that the 3pt raises slow and vibrates as it gets close to the top. No mech with knowledge within 100 miles. Everyone works on mowers around here now. What is your guess on the problem.

Toby




[Log in to Reply]   [No Email]
JD @ Antique Acres

05-05-2007 06:05:07




Report to Moderator
 Re: 4020 hydraulics in reply to Toby Woodmore, 05-05-2007 04:29:06  
The first thing I would do is change the oil and filters, if you haven't . On my 4020 awhile back I had similar symptoms and found there was a slight amount of condensation in the system cause the filters to plug. Drained and flushed, new filters and oil..problem solved.



[Log in to Reply]  [No Email]
tstex

05-05-2007 05:38:48




Report to Moderator
 Re: 4020 hydraulics in reply to Toby Woodmore, 05-05-2007 04:29:06  
Toby,

msb sounds like he could be on to something.

I am not familiar with the specifics of the 4020 hydraulics, but here are some basics:

1). insure all the fluids, filters, screens are up to spec.
2). if you do not use they hydraulics much and have had some excessive temperature changes [cold to warm/hot], you may have some condensation/water in the system - using the system alot and heating it up will/should burn this off...

try heating the tractor up then really give the hydraulics a good working, and i mean a good one [that is after you have checked to determine everything is up to spec].

finally, did this problem just start? what is the history of the issue.

post back and let us know,
tstex

[Log in to Reply]  [No Email]
msb

05-05-2007 05:25:31




Report to Moderator
 Re: 4020 hydraulics in reply to Toby Woodmore, 05-05-2007 04:29:06  
Have you changed the transmission filter lately? That is the first place to start. The suction screen should also be checked if the filter change doesn'ty help.



[Log in to Reply]  [No Email]
toby

05-06-2007 05:48:59




Report to Moderator
 Screen in reply to msb, 05-05-2007 05:25:31  
I know this sounds dumb but where is this suction screen everyone is always talking about.

toby



[Log in to Reply]  [No Email]
Gerald J.

05-06-2007 20:09:28




Report to Moderator
 Re: Screen in reply to toby, 05-06-2007 05:48:59  
Behind a square socket headed plug, left rear lower corner of the final drive housing.

Gerald J.



[Log in to Reply]  [No Email]
Doug in IL

05-05-2007 04:55:37




Report to Moderator
 Re: 4020 hydraulics in reply to Toby Woodmore, 05-05-2007 04:29:06  
I don't know what causes it, but I have a 2510 that does the same thing. Except, mine does it after the tractor is first started. Mine will vibrate all the way up for the first couple times you use it. It will work real smoothly from then on. Until it sets a while and the tractor is restarted. Then the vibration cycle will happen again.



[Log in to Reply]  [No Email]
Doug in IL

05-05-2007 15:56:57




Report to Moderator
 Re: 4020 hydraulics in reply to Doug in IL, 05-05-2007 04:55:37  
I just finished changing the hydraulic filter and transmission/hydraulic oil in my 2510. Also checked the screen and it was clean. The jerky three point problem seems to be solved.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy