Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

DeRust Carb with 12 Volt charger

Welcome Guest, Log in or Register
Author 
Ben.So.Tex

04-25-2007 16:39:33




Report to Moderator

One of my jd B carb got some moisture rust in it. So I took the carb and droped it in a plastic container of water and hooked one lead of a charger to the carb and have the other lead down in the water, Will this take the rust off? Or am I just spinnings my wheels? Ben




[Log in to Reply]   [No Email]
Ken Thies

04-26-2007 15:52:48




Report to Moderator
 Re: DeRust Carb with 12 Volt charger in reply to Ben.So.Tex, 04-25-2007 16:39:33  
A little phosphoric acid will fix you right up.
Ken



[Log in to Reply]  [No Email]
Mike M

04-26-2007 09:40:49




Report to Moderator
 Re: DeRust Carb with 12 Volt charger in reply to Ben.So.Tex, 04-25-2007 16:39:33  
A sandblast cabinet works wonders on them.



[Log in to Reply]  [No Email]
F-I-T

04-26-2007 12:48:18




Report to Moderator
 Re: DeRust Carb with 12 Volt charger in reply to Mike M, 04-26-2007 09:40:49  
If you don't have a $500 compressor and a $300 blast cabinet on hand, a $15, 10 amp charger, or a even a fully charged car battery, along with 25 cents in washing soda is a tad more economical. I have both and still opt to use electrolysis as my main rust and paint removal method of choice.

As far as the notion that water and electricity make for a dangerous combination, it sure does, just like sparks and gasoline. You do need to possess an understanding of the process, the theory and practice, and operate with the necessary required safeguards like having a working GFI power source. Remember, even charging a wet-cell battery involves bringing water and electricity into close proximity, as does the washing machine, the dish washer, the electric water heater, swimming pool, hot tub, aquarium, Mr. Coffee, electric range, irrigation timers, etc.

[Log in to Reply]  [No Email]
F-I-T

04-25-2007 18:51:57




Report to Moderator
 Re: DeRust Carb with 12 Volt charger in reply to Ben.So.Tex, 04-25-2007 16:39:33  
Ben:

My site is down for maintenance, so all you will find is my e-mail address for now. If you send me a note at [email protected], I'll send you the article that I post on my site.

Frank



[Log in to Reply]  [No Email]
Thunderr

04-25-2007 17:50:47




Report to Moderator
 Re: DeRust Carb with 12 Volt charger in reply to Ben.So.Tex, 04-25-2007 16:39:33  
see www.fboerger.com it will tell how to do electrolysis right. long story short...washing soda (not baking soda...) in the water. maybe a spoonful in your pail. Neg - lead to carb, pos + lead to a piece of scrap sheet steel. dont let copper touch the water, attatch with steel wire. plug in. but first read site, very informative



[Log in to Reply]  [No Email]
RWWisehart

04-25-2007 17:19:37




Report to Moderator
 Re: DeRust Carb with 12 Volt charger in reply to Ben.So.Tex, 04-25-2007 16:39:33  
O my



[Log in to Reply]  [No Email]
G/MAN

04-25-2007 16:57:52




Report to Moderator
 Re: DeRust Carb with 12 Volt charger in reply to Ben.So.Tex, 04-25-2007 16:39:33  
Let's see - a battery charger plugged into an outlet with the battery leads dropped in a bucket of water. I don't see any potential for electrocution, fire or any other injury or damage there whatsoever...



[Log in to Reply]  [No Email]
billde

04-25-2007 20:49:32




Report to Moderator
 Re: DeRust Carb with 12 Volt charger in reply to G/MAN, 04-25-2007 16:57:52  
You are stepping 120 volts down to about 7 volts at about 4 amps. Been doing it for about 6 or 7 years now, works great if you use Washing Soda and a stainless electrode.



[Log in to Reply]  [No Email]
G/MAN

04-26-2007 07:38:55




Report to Moderator
 Re: DeRust Carb with 12 Volt charger in reply to billde, 04-25-2007 20:49:32  
Getting away with something doesn't make it safe. Want to be that there's a sticker on that battery charger somewhere that recommends keeping it away from water???



[Log in to Reply]  [No Email]
cwjohn

04-27-2007 13:59:48




Report to Moderator
 Re: DeRust Carb with 12 Volt charger in reply to G/MAN, 04-26-2007 07:38:55  
Best thing I ever found is meant for removing the bluing from a gun (bluing is just pretty rust) It"s from Brownells (www.brownells.com) called Steel White. Costs 25 bucks for a quart mix with 3 quarts of water and let it sit in a bucket over night. Looks like it was just cast when its done. Blow the carb out with DRY compressed air when done.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy