Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

roll-o-matic

Welcome Guest, Log in or Register
Author 
bigblock

04-18-2007 19:14:05




Report to Moderator

I have a roll-o-matic,but what is it and what does it do?Also what does the rockshaft do?




[Log in to Reply]   [No Email]
bigblock

04-20-2007 18:23:51




Report to Moderator
 Re: roll-o-matic in reply to bigblock, 04-18-2007 19:14:05  
Thanks guys that clears that up.Ya'll got any sheet metal for a 730 gas?I also need throttle and governor linkage.



[Log in to Reply]  [No Email]
MLD

04-20-2007 11:33:37




Report to Moderator
 Re: roll-o-matic in reply to bigblock, 04-18-2007 19:14:05  
These are the type of things that make me LOVE a JOHN DEERE!!! 1.Two Cylinder
2.Roll-o-matic 3.Hand Clutch
4.Rack & Pinion Rear Wheel Tread Adjustment (on the newer tractors, the old splined axles are are a BEAR)



[Log in to Reply]  [No Email]
Another Bill

04-19-2007 17:33:23




Report to Moderator
 Re: roll-o-matic in reply to bigblock, 04-18-2007 19:14:05  
I always thought the Roll-O-Matic was a clever idea. We never had any problems with the one on our 4010. Simple way to cut the tractor's front end movement over a bump under 1 tire by 50% less than a straight axle. They are more fragile than a wide front end, as they can be broken if you hit things too hard. The gears will wear if not kept greased and when worn thin enough the front end will fall down. However, Roll-O-Matics will last for many years if properly maintained and operated. Just watch out about getting in the mud with them (same with a straight axle narrow front end too). They can plug up rather easily, and they're usually at their very worst in the mud when you're trying to back up to get out. You also need to keep the correct tire size on them so there will be adequate clearance under the tractor when at the extreme rotation.

[Log in to Reply]  [No Email]
johns48jdb

04-19-2007 15:46:45




Report to Moderator
 Re: roll-o-matic in reply to bigblock, 04-18-2007 19:14:05  
i've broken as much ground as any body my age i'm sure. i'm 63 and grew up "yanking" the trip rope on a jd disk turner turning plow. i never saw the front tire of any tractor riding in a furrow. if there is only 3 inches of play then how could it possibley ride in the bottom of a furrow? both front tires always ran on unbroken ground on anything i ever drove. when you turned the corner at the end of a through you tired to aim the front wheels for the exact corner of where two furrows met. that way you had an ease ride back up onto the unbroken ground with the front end and you did get the blazes knocked out of you by trying to climb up on the unbroken ground just any where. you didn't have to slow your engine down that way and could keep your ground speed up that way. oh yeah, never tie the trip rope to the seat of your tractor and use a rope that would break ease. on the unbroken ground the roll-a-matic was real nice.

[Log in to Reply]  [No Email]
dds-inc

04-18-2007 20:17:51




Report to Moderator
 Re: roll-o-matic in reply to bigblock, 04-18-2007 19:14:05  
to boost iowa daves comment, it was also used to give front end steering stability when you have one tire in the furrow while plowing.



[Log in to Reply]  [No Email]
F-I-T

04-18-2007 21:16:34




Report to Moderator
 Re: roll-o-matic in reply to dds-inc, 04-18-2007 20:17:51  
If you had one wheel of a narrow front end in the furrow while plowing, you were having a tough day! Typically the Roll-A-Matic really shined when you were working ground the first time over, up and over turned ground, down in a depression with one wheel, high on another spot with the other wheel. It did help when you had to climb up and over furrow walls, too.

The thing a lot of folks miss about the Roll-A-Matic is that since the two spindles were geared together, when one tire went over a 6" obstacle, the other wheel was pushed down the same amount so the effect was that you just went over a 3" bump. If yuou can decrease the effective impact of every bump by 50%, you had a great improvement in the ride.

The rockshaft used in the context of a tractor is typically a lifting shaft that does not turn completely around, making only a partial rotation so it "rocks" instead of rotating. Today's 3 point hitches use such a shaft and it too, is called a rockshaft. Any shaft that is designed to rotate over a partial circle is known as a rockshaft.

Frank

[Log in to Reply]  [No Email]
dds-inc

04-19-2007 21:48:27




Report to Moderator
 Re: roll-o-matic in reply to F-I-T, 04-18-2007 21:16:34  
jiminy cricket, did you actually think I plow with the whole rollomatic front end in the furrow? that'd be a s*** a** plowing job! Of course i meant one rear tire!



[Log in to Reply]  [No Email]
F-I-T

04-20-2007 06:24:29




Report to Moderator
 Re: roll-o-matic in reply to dds-inc, 04-19-2007 21:48:27  
Hey back off! I read what you wrote. I also don't see the advantage of a roll-a-matic in a canted position, so your post was pretty difficult to understand. Nothing beats good punctuation and clear, concise wording. Try that before you holler at me.



[Log in to Reply]  [No Email]
just-a-thought

04-20-2007 09:06:59




Report to Moderator
 Re: roll-o-matic in reply to F-I-T, 04-20-2007 06:24:29  
You don't think the roll-a-matic would equalize the load on the front wheels when the tractor is tilted due to a rear tire in the furrow? That should certainly improve your ability to keep the tractor straight.

Interesting.



[Log in to Reply]  [No Email]
F-I-T

04-20-2007 09:46:02




Report to Moderator
 Re: roll-o-matic in reply to just-a-thought, 04-20-2007 09:06:59  
I think ease of steering straight while plowing with a row crop twin wheel front end is more a function of having the draft line of the plow through the tractor centerline so you don't have to fight it with the steering wheel....or the brakes.

The R-O-M might keep both wheels in contact with the ground as opposed to a solid front axle by raising one wheel up and pushing the other down, but the spindles will still be tilted up on the left and down on the right since the R-O-M doesn't vary in the lateral or roll direction. So, the tires actual contact will be skewed toward the outside edge of one tire and toward the center of the other, just like on a solid axle.

I just never found R-O-M to be an aid to steering straight ahead with that tilt or cant, but great for variable vertical changes, like up and over a rock, or spanning a depression.

Now the advent of Power Steering....THAT was an improvement!

[Log in to Reply]  [No Email]
just-a-thought

04-19-2007 07:04:13




Report to Moderator
 Re: roll-o-matic in reply to F-I-T, 04-18-2007 21:16:34  
"to boost iowa daves comment, it was also used to give front end steering stability when you have one tire in the furrow while plowing."

He probably meant one rear tire. The roll-o-matic would help in this situation because the load on the two front tires would be equalized, making steering easier. (The tire with more load has more rolling resistance, pulling the tractor in that direction.)



[Log in to Reply]  [No Email]
CLW

04-18-2007 20:12:37




Report to Moderator
 Re: roll-o-matic in reply to bigblock, 04-18-2007 19:14:05  
third party image

Steps over rocks and such and makes steering better when following a furrow.



[Log in to Reply]  [No Email]
Mike M

04-19-2007 04:55:28




Report to Moderator
 Re: roll-o-matic in reply to CLW, 04-18-2007 20:12:37  
Is that an old photo from a display ?

Looks like even the "NEW" tractors dripped some,look at the spot on the carpet under the middle.



[Log in to Reply]  [No Email]
NE IA Dave

04-18-2007 19:52:55




Report to Moderator
 Re: roll-o-matic in reply to bigblock, 04-18-2007 19:14:05  
A roll a matic is between the front wheels, drive over a hump with one wheel and you can see for yourself that it evens out the extreem high and low spots.

The rock shaft simply twists forward- the shaft purpose is so if a implment is hooked on to this as the shaft rolls forward it lifts the implment out of the ground. You are sitting over this shaft, and each end is over your rear axle (that is where the implment hooks) Most were used probably for cultivators.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy