Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

346 baler

Welcome Guest, Log in or Register
Author 
rick schriever

04-16-2007 18:22:40




Report to Moderator

i have a 346 johndeere baler and a 336 baler. taking parts from 336 and using them on the 346. my question is. I switched the gear boxs that has the plunger and fly wheel on it. I did put the fly wheel back on the 346 that came off it because it was thicker then the one that came off the 336. question is are the strokes the same from the 336 plunger as it was from the 346 so now I have the 336 gear box and the fly wheel on that gear box from the 346

[Log in to Reply]   [No Email]
Tx Jim

04-17-2007 04:02:59




Report to Moderator
 Re: 346 baler in reply to rick schriever, 04-16-2007 18:22:40  
I think the strokes/min are the same on 336/346.Tx Jim



[Log in to Reply]  [No Email]
rick schriever

04-17-2007 19:04:34




Report to Moderator
 Re: 346 baler in reply to Tx Jim, 04-17-2007 04:02:59  
thanks Tx Jim that makes me feel better.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy