Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

4955 versus 4960

Welcome Guest, Log in or Register
Author 
teddy56

04-15-2007 18:09:44




Report to Moderator

Hi. I'm looking to trade my 4840 for one of thses. Which would be better if hours and everything were similiar? I have heard that both are excellent. If anyone has info they could give,that would be great. Thanks.




[Log in to Reply]   [No Email]
G/MAN

04-16-2007 17:57:05




Report to Moderator
 Re: 4955 versus 4960 in reply to teddy56, 04-15-2007 18:09:44  
Mechanically-speaking, the two tractors are for all intents and purposes identical - same engine, same powertrain, same horsepower, etc. The main differences are the cab interior, both batteries being located on the LH side, and of course the exhaust, which has already been mentioned. And yes, they're both good horses. I've heard criticism of the 60-series exhaust systems, but in my experience it's a good set-up. A little more of a pain when it comes to adjusting valves or pulling nozzles, but other than that they're very good. And if separating the muffler from the down pipe becomes an issue, the whole exhaust system can pretty easily be removed in one chunk. There's no muffler elbow to rust out, etc. I've worked on dozens of 45s, 47s and 4960s and I think I've had to replace one muffler and have seen a handful of the vertical pipes next to the cab rust out and blow out at the top.

[Log in to Reply]  [No Email]
luckyman7m

04-16-2007 08:57:23




Report to Moderator
 Re: 4955 versus 4960 in reply to teddy56, 04-15-2007 18:09:44  
I would personally pick the 4960 because we have a 4760 and it has been the best of tractors we bought. I also like the exhaust out to the side.



[Log in to Reply]  [No Email]
GeraldDD333

04-16-2007 07:09:49




Report to Moderator
 Re: 4955 versus 4960 in reply to teddy56, 04-15-2007 18:09:44  
both are good tractors. i have seen many over 10,000 hours that have original engines and trannys. their just good old workhorses. if it were me,id pick the 4960 simply cuz of the side exhaust.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy