Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Difference between 630 and 720

Welcome Guest, Log in or Register
Author 
txasylum

04-07-2007 10:39:03




Report to Moderator

I am posting this question for a friend of mine that is leaseing some land to plant wheat, etc.

He is looking at two tractors. One is a 720 LP with a wide front and the other is a 630 LP with the row crop front. Both have 3-point hitch. He is buying a 14' tandem disc to use. A few questions come to mind.

1. What is the difference between the two tractors.
2. Will both pull the 14' disc without hesitation?


The guy with the 720 wants $3000 and the 630 is $1800. Of course the $1800 is more in his price range, but he doesn't want to buy a tractor that will be underpowered and can not pull the 14' disc.

Thanks
Bob

[Log in to Reply]   [No Email]
nothing but a deere

04-12-2007 12:35:55




Report to Moderator
 Re: Difference between 630 and 720 in reply to txasylum, 04-07-2007 10:39:03  
i wouldnt worry about getting a 14' plow i would get a 12'plow easier for both of them



[Log in to Reply]  [No Email]
MLD

04-09-2007 06:02:54




Report to Moderator
 Re: Difference between 630 and 720 in reply to txasylum, 04-07-2007 10:39:03  
The 720 is a size larger than the 630 & a series older. 730 replaced the 720, 630 replaced the 620. 14' maybe a load for the 720, I'd want a 12'. Good Luck.



[Log in to Reply]  [No Email]
txasylum

04-08-2007 10:25:46




Report to Moderator
 Re: Difference between 630 and 720 in reply to txasylum, 04-07-2007 10:39:03  
Well, that guy that has the 630 wants $2500, not $1800. Was misinformed. So the decision is to buy the 720.

Bob



[Log in to Reply]  [No Email]
HAPPY DEERE

04-08-2007 08:55:32




Report to Moderator
 Re: Difference between 630 and 720 in reply to txasylum, 04-07-2007 10:39:03  
ill buy the 720 if he dont



[Log in to Reply]  [No Email]
machinery-man

04-08-2007 06:48:08




Report to Moderator
 Re: Difference between 630 and 720 in reply to txasylum, 04-07-2007 10:39:03  
Mismatching equipment to tractor is ages old. Most people buy a smaller tractor but want to believe it will outdo a larger tractor. Guess they want to think they have something they don't. You're definitely out of line on your setup up. Use about 12' model and you'll be much happier.....



[Log in to Reply]  [No Email]
Pathand

04-08-2007 06:02:05




Report to Moderator
 Re: Difference between 630 and 720 in reply to txasylum, 04-07-2007 10:39:03  
I pull a 12' IH disc with my 620 and it will handle it until soft ground and the disc goes deep. It pulls a lot nicer behind my 720D. When I was in High school my uncle had a 720D and it pulled a 14' JD disc in the sandy soil of Nebraska. Both those tractors are resonably priced. good luck



[Log in to Reply]  [No Email]
mark ace

04-07-2007 20:32:26




Report to Moderator
 Re: Difference between 630 and 720 in reply to txasylum, 04-07-2007 10:39:03  
my 720, 730 & 70 have no problem pulling a 14 foot aw disk, i think i will try one of my 630's this spring just to see how they do



[Log in to Reply]  [No Email]
johns48jdb

04-07-2007 19:30:17




Report to Moderator
 Re: Difference between 630 and 720 in reply to txasylum, 04-07-2007 10:39:03  
i have an 574d ih and at 54 hp its all it wants with a ten foot disk cutting to the axles.



[Log in to Reply]  [No Email]
MPK

04-07-2007 18:00:31




Report to Moderator
 Re: Difference between 630 and 720 in reply to txasylum, 04-07-2007 10:39:03  
I had a 620 with a 13 ft disc and I would say go for the 720. It is 10 HP more, A lot better match for a 14 ft disc.



[Log in to Reply]  [No Email]
txasylum

04-07-2007 15:40:02




Report to Moderator
 Re: Difference between 630 and 720 in reply to txasylum, 04-07-2007 10:39:03  
He says thanks for the advice. Now he has a target to shoot for in reference to disc size and tractor size.

Bob



[Log in to Reply]  [No Email]
Mike Aylward

04-07-2007 14:01:22




Report to Moderator
 Re: Difference between 630 and 720 in reply to txasylum, 04-07-2007 10:39:03  
Txasylum, one thing your friend might consider is that if you take the wide front of the 720 into account the tractors are priced very nearly the same. Wide front ends (assuming it is a factory Deere front end) are bringing about as much as the difference in the price. If your friend simply doesn't want to spend that much money he would be better to pay the $1800 and have money left over for a proper size disk for his 630. A 14 foot disk is too much disk for either tractor to handle. I would look for a 12 foot for the 720 and a 10 foot for the 630. While they might pull a larger disk at times these sizes will be much more "comfortable" for the tractor. Mike

[Log in to Reply]  [No Email]
Mike M

04-07-2007 19:47:15




Report to Moderator
 Re: Difference between 630 and 720 in reply to Mike Aylward, 04-07-2007 14:01:22  
I missed that WF the first time I read it. Had to go back and reread it. Sounds like a good buy on both of them !



[Log in to Reply]  [No Email]
Mike M

04-07-2007 13:14:24




Report to Moderator
 Re: Difference between 630 and 720 in reply to txasylum, 04-07-2007 10:39:03  
The real differance is about 10 HP. 630 should make about 50 and the 720 about 60 Generally the 30 series will bring more $ than the 20 series. From what the others say he's going to need that 720 for that disc. But that sure is a super good price on that 630 !



[Log in to Reply]  [No Email]
txasylum

04-07-2007 10:40:02




Report to Moderator
 Re: Difference between 630 and 720 in reply to txasylum, 04-07-2007 10:39:03  
Oh, I should add that both are equal in appearance, so one is not any better looking than the other.



[Log in to Reply]  [No Email]
Tom43

04-07-2007 11:49:30




Report to Moderator
 Re: Difference between 630 and 720 in reply to txasylum, 04-07-2007 10:40:02  
The 630 absolutely will not pull a 14 foot disc. It will be a load for the 720.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy