Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Anyone ever see a flywheel come off a running trac

Welcome Guest, Log in or Register
Author 
Buckeye

04-02-2007 19:26:24




Report to Moderator

I always wondered what would happen when a flywheel came off a running tractor. Anyone seen it?




[Log in to Reply]   [No Email]
oldksguy

04-05-2007 18:21:02




Report to Moderator
 Re: Anyone ever see a flywheel come off a running in reply to Buckeye, 04-02-2007 19:26:24  
I saw a flywheel come off a styled D at a plow day in Minnesota.. Flywheel went about 100 feet out in front of the tractor through the plowed ground then circled back around on the land side. No one was hurt but not a good situation!!!!



[Log in to Reply]  [No Email]
Mike M

04-04-2007 06:55:53




Report to Moderator
 Re: Anyone ever see a flywheel come off a running in reply to Buckeye, 04-02-2007 19:26:24  
I remember hear tell of a JD 70 D that the crank broke off and flywheel was to of killed the driver. I did spot the tractor on a vist years ago to Willard Oh. tractor junk yard so at least the tractor was were it was suspose to be in the described condition , but can't verify the rest.



[Log in to Reply]  [No Email]
Jen Jensen

04-04-2007 04:13:36




Report to Moderator
 Re: Anyone ever see a flywheel come off a running in reply to Buckeye, 04-02-2007 19:26:24  
It happened here in NY a couple of years ago. The owner's of a John Deere G. They had just bought it and was trying to start it by towing it. The flywheel flew off, rolled across the show grounds and hit a wheel on a John Deere BR, damaging the rim. The owner paid the gentleman to fix his BR's rim, and luckily no one was in the way or they would have been killed. It came off with such force and literally kept rolling loosing no momentum until it hit the BR. Be very careful when buying those "FIXER UPPERS"! The tractor has been gone through since and repaired throughout. It ended up getting a good, used crank and flywheel. It is currently in the paint shop.

[Log in to Reply]  [No Email]
Andy Motteberg

04-03-2007 14:56:03




Report to Moderator
 Re: Anyone ever see a flywheel come off a running in reply to Buckeye, 04-02-2007 19:26:24  
You should leave the flywheel on. It is not good for the tractor to run without the flywheel, the motor turns easier with the weight and sort of keeps the motor balanced.



[Log in to Reply]  [No Email]
Mike M

04-03-2007 10:04:38




Report to Moderator
 Re: Anyone ever see a flywheel come off a running in reply to Buckeye, 04-02-2007 19:26:24  
I once had a 720D that the previous owner had left running while hauling in silage wagons and upon returning the tractor was still running and the flywheel was across the barnyard up against the silo. Or so the story goes ?



[Log in to Reply]  [No Email]
alnciowa

04-03-2007 05:51:22




Report to Moderator
 Re: Anyone ever see a flywheel come off a running in reply to Buckeye, 04-02-2007 19:26:24  
25 years ago here in NC Iowa a little boy was killed by a fly that came off a JD.



[Log in to Reply]  [No Email]
rick in sc

04-03-2007 05:06:08




Report to Moderator
 Re: Anyone ever see a flywheel come off a running in reply to Buckeye, 04-02-2007 19:26:24  
I've never seen that happen but I did hear about a Fairbanks-Morse diesel that ran away, sheared the end of crankshaft off with the flywheel attached (several ton flywheel), tore the wall out of the cotton-gin it was running,and went down a hill to a creek several hundred feet away. So-called operator (newbie) had filled the crankcase with oil and once it got hot it started running on the oil vapors. The "operator" ran and was never seen in the area again.

[Log in to Reply]  [No Email]
Steve Crum

04-03-2007 04:52:06




Report to Moderator
 Re: Anyone ever see a flywheel come off a running in reply to Buckeye, 04-02-2007 19:26:24  
I've heard a few clunking and getting ready before, but never saw one drop. Dad used to get laughing so hard while telling of the 2 1/8" shaft snapping right behind the flywheel on a New Holland model 66 baler they had. It chased the hired man a short distance before it dawned on him to side step it. The flywheel went thru a woven wire fence and into the creek where it stopped. The drive belts from the old Wisconsin engine just missed hitting Dad who was on the wagon behind the baler.

[Log in to Reply]  [No Email]
leon Nelson

04-03-2007 04:31:52




Report to Moderator
 Re: Anyone ever see a flywheel come off a running in reply to Buckeye, 04-02-2007 19:26:24  
There's an interesting description of this in the write up section of the Nebraska Tractor Test Report #1 of the Waterloo Boy.



[Log in to Reply]  [No Email]
machinery-man

04-03-2007 04:08:18




Report to Moderator
 Re: Anyone ever see a flywheel come off a running in reply to Buckeye, 04-02-2007 19:26:24  
many years ago, my Uncle was baling hay with a 44 B. The flywheel came off went several yards. As I recalled the engine stopped, he may have throttle back, wheel was reattached and we were back on our way. To my knowledge no damage or problems as a result.



[Log in to Reply]  [No Email]
JD60WH

04-02-2007 20:09:41




Report to Moderator
 Re: Anyone ever see a flywheel come off a running in reply to Buckeye, 04-02-2007 19:26:24  
I did have one come off an Unstyled A I was driving. I was tooling around the field and I noticed the thing moving and before I knew it the thing dropped straight down rolled about 5 feet or so. The ground was real soft so it took a bunch of the inertia the flywheel had. The tractor was shaking so bad I pulled the throttle back dropped it in 4th,slammed the brakes and threw the clutch to kill the motor. I went and picked up the flywheel and found it was cracked around the bolt holes. I"m lucky no shrapnel flew off while it was running. Scared the crap outa me!

[Log in to Reply]  [No Email]
Bob-Wyo

04-02-2007 19:56:04




Report to Moderator
 Re: Anyone ever see a flywheel come off a running in reply to Buckeye, 04-02-2007 19:26:24  
Heard of a D coming off in the field and it busted the front axle out from under the D and rolled about 125 more feet up the field. You right don't even want to go there, but sure a reason to keep checking them.
Bob



[Log in to Reply]  [No Email]
G/MAN

04-03-2007 07:38:12




Report to Moderator
 Re: Anyone ever see a flywheel come off a running in reply to Bob-Wyo, 04-02-2007 19:56:04  
It had enough energy to break the front axle off a Deere and THEN roll another 100+ feet? Sorry, but that's one I'd really have to see to believe. I can't see a smooth flywheel getting enough "grip" on dirt to do that. Sometimes stories get bigger and bigger the more times they're told.



[Log in to Reply]  [No Email]
Glen in TX

04-03-2007 09:03:47




Report to Moderator
 Re: Anyone ever see a flywheel come off a running in reply to G/MAN, 04-03-2007 07:38:12  
I guess you need to study closer on a D next time? I could see it going forward landing on the axle first before hitting the ground as not too far forward from there plus that D flywheel is heavy. I got a old one for a vise stand and it doesn't move much on a level floor or out on dirt. Earlier D axles were made lighter too and know for busting and cracking out from just field work and many early ones got replaced with later heavier axles too.

[Log in to Reply]  [No Email]
G/MAN

04-03-2007 16:45:24




Report to Moderator
 Re: Anyone ever see a flywheel come off a running in reply to Glen in TX, 04-03-2007 09:03:47  
No, I've been around a couple of "D"s, both styled and unstyled. Do you really think the crankshaft is going to be able to "fling" the flywheel forward enough for it to land directly on the axle or hit it with enough force flying forward to actually break the axle? I don't. The very fact that it IS heavy is going to suggest that it will fall straight down thanks to gravity. A flywheel laying flat on the ground and one balancing on its edge are two different things. After all, the crankshaft is stationary and spinning and the flywheel is more or less stationary and spinning also. The only "forward" momentum it would actually have is the forward momentum of the entire tractor moving, right? Don't get me wrong, I'm not saying it DIDN'T happnen or COULDN'T happen, and if someone has PROOF that it happened, I'll eat these words. It's just that it seems pretty unlikely to me. I believe there's a TV show called "Mythbusters" that has successfully disproven ALL SORTS of things that people have sworn up and down actually happened. Maybe we should give them a call.

[Log in to Reply]  [No Email]
johns48jdb

04-02-2007 19:36:49




Report to Moderator
 Re: Anyone ever see a flywheel come off a running in reply to Buckeye, 04-02-2007 19:26:24  
i don't want to even think about it. i guess it has happened but i've never heard of it. i have heard of guys using the steering wheel and adapter to hand crank an electic crank tractor when the battery was dead and the steering wheel would take off flying and you'd have to run it down. lets not try this at home kids.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy