Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

730 to 630 swap

Welcome Guest, Log in or Register
Author 
MN Rick

04-01-2007 08:39:46




Report to Moderator

Got an offer to trade my 730 ES diesel for a 630 gas. Not a Deere guy here so kind of lost on this deal. My 730 has round tube wide front (not correct, I know), 3 pt without top link, very straight tin, almost new 15.5-38 Firestones. Very good running engine, runs clean from the moment it is started, battery box needs help, no fenders. Fellow wants to trade even up for a 630 that he calls "parade ready". Fenders, but no 3pt. Tires about the same amount of lug as mine, but light cracking. Havent seen his tractor yet, but he claims that I will be "very impressed with the paint". Is a 630 as sellable as a 730? His asking price is 300.00 more than mine, but wants to trade even up. He wants to do a little hobby farming and says he has too much money, time and effort into this tractor to take it to the field. After sleeping on it my inclination id to think I probably need a few hundred to boot. Any thoughts? Thanks

[Log in to Reply]   [No Email]
Tx Jim

04-02-2007 05:12:13




Report to Moderator
 Re: 730 to 630 swap in reply to MN Rick, 04-01-2007 08:39:46  
Rick,I sold a "non-running 730D" with wide frt,3pt for more $$$$$$ than most running 630's will bring. I say $1000's of boot would be required. Tx Jim



[Log in to Reply]  [No Email]
Big_Roy

04-01-2007 09:58:50




Report to Moderator
 Re: 730 to 630 swap in reply to MN Rick, 04-01-2007 08:39:46  
I think you should get several hundred more to boot. There is no way I would trade a good running 730 diesel w/3 point for a gas 630 w/o 3 point.



[Log in to Reply]  [No Email]
Bob

04-01-2007 09:21:59




Report to Moderator
 Re: 730 to 630 swap in reply to MN Rick, 04-01-2007 08:39:46  
R U nutz?

Or; is this the April 1 joke???

If you REALLY want to get rid of the $$$$ 730 put it on epay; or advertise it in some of the magazines and get top $$$$ out of it; THEN deal on a gasser.



[Log in to Reply]  [No Email]
MN Rick

04-01-2007 09:26:47




Report to Moderator
 Re: 730 to 630 swap in reply to Bob, 04-01-2007 09:21:59  
Wow...didn"t expect that kind of reception. I buy and sell red ones all the time and am up to date on values. Said in my post I"m not a Deere guy. I take it a 630 gas is not nearly the desirable tractor that a 730d is. Guess I need to apologise for my stupidity.



[Log in to Reply]  [No Email]
uoflncolts

04-01-2007 10:01:59




Report to Moderator
 Re: 730 to 630 swap in reply to MN Rick, 04-01-2007 09:26:47  
All 30 series are "desirable" However if you had a 630 gas and 730 diesel electric side by side with same type of restoration and options, the 730 should bring about $1000 to $2000 more. Now you have to consider that you have a $900 front end and a $1000 three-point on your tractor too. It also bugs me that the 630 describtion has "parade ready". Does that mean it is worn out and cant pull a two bottom plow, so all it can do is pull a little wagon? I dont even look at "parade ready" tractors because, in my opinion, they are just painted for show, must of the time with no motor, transmission, or any work at all. There is a reason why the seller did not use the restored word, I would try to find out why. Good luck, if you get a chance post pictures of both.

[Log in to Reply]  [No Email]
Bob

04-01-2007 09:49:16




Report to Moderator
 Re: 730 to 630 swap in reply to MN Rick, 04-01-2007 09:26:47  
Sorry; Rick! I didn't mean to come across like that! There have been lots of April Fool jokes floating around some of the "boards" I've been on this morning and I was seriously thinking this might have been one of them!

Since you're serious; I appologize!

Seriously; you need to research the selling prices of good-running 2-cylinder diesels; with 3-point; even; before even CONSIDERING swapping it away!

[Log in to Reply]  [No Email]
MN Rick

04-01-2007 13:35:22




Report to Moderator
 Re: 730 to 630 swap in reply to Bob, 04-01-2007 09:49:16  
Yeah, I'm serious. It occurs to me that I'm trading wide front and 3 pt for paint and fenders. I now wish I had priced my 730 a little higher, because if I go ahead with this, I'll be selling a fairly priced tractor and getting into one I'll have to get top dollar out of in order to come out on the deal. I collect, buy, sell, trade and part out tractors all the time and while I have no illusions about getting rich at it, I hate to have it cost me money to trade.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy