Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Duplicate post from impl alley re: Vermeer R21 beh

Welcome Guest, Log in or Register
Author 
TimS in Mo

03-09-2007 06:53:53




Report to Moderator

Apologies for the double post but I wanted to make sure I consulted with my JD pals in here:

I bought a fixxer upper R21 ( mostly needed a bunch 140+ rake teeth and a couple hydraulic hoses, and a lot of lubing etc ) that I was wondering how
to slow down the hydraulic flow coming from the 4010 scv since they didn't have the flow control knobs.

I know I could put a flow restrictor in place, I also thought of making a flip over bracket that would hold the second scv lever in the 'slow extend' position as well.

Any other ideas before I reinvent the wheel on how to slow the hydraulic flow from a closed center hydraulic system thru those motors on the rake?

Oh, and just for fun and because the rake was rusty in a lot of spots, we painted it glossy JD green with gloss jd yellow wheels. I'm going to get some John Deere stickers for it and a made up model number like 699 and slap on it just for fun. Vermeer makes the newer and bigger R23 rake for JD as the 705 so I figured what the heck.

:)

It actually looks so good the paint crew ( father in law, my dad, and my wife ), want me to pull the Vermeer 605 H in the barn, clean it up, strip the stickers off and paint it green as well - which I imagine we will do as well as its a bit rusty in spots and we have lots of gloss JD Green paint.

[Log in to Reply]   [No Email]
Bob

03-09-2007 07:51:13




Report to Moderator
 Re: Duplicate post from impl alley re: Vermeer R21 in reply to TimS in Mo, 03-09-2007 06:53:53  
No need to "reinvent the wheel. The SCV's (located under the hood) have a basic "rabbit-turtle control". Look for the screw with a screwdriver slot. Turn CW to slow the implement hydraulics flow from that SCV.



[Log in to Reply]  [No Email]
TimS in Mo

03-09-2007 09:00:18




Report to Moderator
 Re: Duplicate post from impl alley re: Vermeer R21 in reply to Bob, 03-09-2007 07:51:13  
Thanks Bob, that's just what I needed!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy