Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

1951 A Fuel Line (Gas)

Welcome Guest, Log in or Register
Author 
Mean Green

03-05-2007 04:57:50




Report to Moderator

I have a 1951 JD A that is Gas and I'm trying to find a fuel line for it. What have you guys used or where can you get them?

Thanks




[Log in to Reply]   [No Email]
CalJim

03-05-2007 21:25:59




Report to Moderator
 Re: 1951 A Fuel Line (Gas) in reply to Mean Green, 03-05-2007 04:57:50  
Sharp's has alot of fuel lines, worth
checking out. www.oldjd4u.com CalJim



[Log in to Reply]  [No Email]
Mean Green

03-05-2007 19:19:10




Report to Moderator
 Re: 1951 A Fuel Line (Gas) in reply to Mean Green, 03-05-2007 04:57:50  
I ordered my parts from Robert"s. Thanks guys.



[Log in to Reply]  [No Email]
Ben.So.Tex

03-05-2007 16:58:58




Report to Moderator
 Re: 1951 A Fuel Line (Gas) in reply to Mean Green, 03-05-2007 04:57:50  
I made a couple of them out of copper tubing, Got the stuff at local ACE hareware store and the fitting also. Good Luck Ben



[Log in to Reply]  [No Email]
F-I-T

03-05-2007 08:29:49




Report to Moderator
 Re: 1951 A Fuel Line (Gas) in reply to Mean Green, 03-05-2007 04:57:50  
third party image

Like Glen said, Robert's has the hardware. In the 60's we had need to make a new one for our '48 "A", and the dealer just sold us a length of copper and said that's what they use. I have made many over the years, and I prefer using the correct size tubing, but in steel. Steel brake line is now available at most car parts stores in a variety of lengths, and it really makes a nice, tough line, but it is more difficult to handle and bend, and it takes a knack to solder the glands on it, but when you are done it will look and act as factory. Don't forget to put the loop in it for adjustability, and DO NOT forget to put the nuts on the line before you solder the final gland on!

You can just barely see the steel fuel line running form the sediment bowl on my VAC project behind the aircleaner canister to the carburetor.

Frank

[Log in to Reply]  [No Email]
Glen in TX

03-05-2007 06:57:09




Report to Moderator
 Re: 1951 A Fuel Line (Gas) in reply to Mean Green, 03-05-2007 04:57:50  
Not sure if JD has the nuts and line glands new still but I know other vendors and Roberts Carb do have those if you want to build up your own lines. It's hard to ask worn, rusty or cracked glands and nuts to seal after almost 60 years.



[Log in to Reply]  [No Email]
P Browning

03-05-2007 06:11:32




Report to Moderator
 Re: 1951 A Fuel Line (Gas) in reply to Mean Green, 03-05-2007 04:57:50  
Try Detwiler (715) 659-4252, or Shephards (715) 265-4988, or Marlin Smith (712) 489-2570.

If you can, be part-number specific because there will be a gasoline line and a fuel line on your tractor if it is an all-fuel model.

PatB



[Log in to Reply]  [No Email]
ram ranch

03-05-2007 05:32:39




Report to Moderator
 Re: 1951 A Fuel Line (Gas) in reply to Mean Green, 03-05-2007 04:57:50  
From the sediment bowl to carburator? Is a gas or all fuel? I can get the gas one, or you can just go down to the hardwere store and make your own.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy