Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

2010 value, What do you think?

Welcome Guest, Log in or Register
Author 
Steve Crum

03-04-2007 09:31:55




Report to Moderator

third party image

I went and took a look at this 2010 this morning more out of curiosity that anything. It's been sitting along route 6 for the better part of a year now for sale. I contacted the owner by phone. It is a gas tractor with 3 pt, PTO that won't shut off, a tach/hour meter that is not readable (if it even works), a seat you can't sit in and tire that hold air at best. Price is $4,000 firm. Supposedly the engine has 30 hours on it since being majored but the owner has no receipts and it looks like the air cleaned tube hasn't been hooked up in a good long time.
Some humor for a Sunday morning and a nice road trip to have breakfast with Bad Brad.

[Log in to Reply]   [No Email]
Bill in NorthCentral PA

03-04-2007 15:45:37




Report to Moderator
 Re: 2010 value, What do you think? in reply to Steve Crum, 03-04-2007 09:31:55  
Steve, I stopped to look at it too. I left when I saw the $4,000 price tag - too high to even begin to negotiate - and then he won't to boot? I don't know the name of the Owner, but I should know the Owner if you want some more info (assuming you have the name). How does Bad Brad like MU?

Bill



[Log in to Reply]  [No Email]
Steve Crum

03-04-2007 16:31:54




Report to Moderator
 Re: 2010 value, What do you think? in reply to Bill in NorthCentral PA, 03-04-2007 15:45:37  
Brad likes MU, just wish he would give it the effort it deserves. Seems like the only time we see him anymore is if he has car trouble or we go see him.
As far as the tractor and it's owner, I have no further interest. I would settle for a red tractor if the price is fair for what I need it for.



[Log in to Reply]  [No Email]
Bill in NorthCentral PA

03-04-2007 17:43:39




Report to Moderator
 Re: 2010 value, What do you think? in reply to Steve Crum, 03-04-2007 16:31:54  
Wish him luck. When I attended there I didn't give it the effort it deserved, and now I don't usually tell people that I ever attended there. My GPA (from other college endeavors) is a 3.95, unless you count the one semester at MU back in the 80's, which probably makes the GPA a 1.00 or so!

Bill



[Log in to Reply]  [No Email]
G/MAN

03-04-2007 16:56:21




Report to Moderator
 Re: 2010 value, What do you think? in reply to Steve Crum, 03-04-2007 16:31:54  
You would??? Say, I got a 560 gas that only needs a new seat, new T-A, new clutch, 3 new tires and a paint job. All for only $9500. Interested?



[Log in to Reply]  [No Email]
Steve Crum

03-04-2007 18:14:26




Report to Moderator
 Re: 2010 value, What do you think? in reply to G/MAN, 03-04-2007 16:56:21  
Yoy bet pal!! Those are a dime a dozen in this area. Biggest problem with those is the 2 pt fast hitch and of course the T/A which is usually a casting full of cinders by the time a problem is realized.
I'm looking for something reasonably priced in the 5,000 pound class that I can set up a forklift mast on, on the 3 pt hitch for handling steel sheets.



[Log in to Reply]  [No Email]
Pete/ME

03-05-2007 02:53:43




Report to Moderator
 Re: 2010 value, What do you think? in reply to Steve Crum, 03-04-2007 18:14:26  
Steve, check out Scott at>Link
I see he's got a rear forklift attachment for sale. I don't know anything about the lift, but Scott's a good guy to deal with.



[Log in to Reply]  [No Email]
Mike M

03-04-2007 15:22:54




Report to Moderator
 Re: 2010 value, What do you think? in reply to Steve Crum, 03-04-2007 09:31:55  
I guess the owner musta heard of that 5010 going for $70,000 Plus and then he thinks his 2010 at $4,000 is a real deal !

Pass it up and find something better for the same money ! like a 1020,2020 or even an old 620,630



[Log in to Reply]  [No Email]
jdemaris

03-04-2007 14:01:26




Report to Moderator
 Re: 2010 value, What do you think? in reply to Steve Crum, 03-04-2007 09:31:55  
For me, I'd never pay more than $1500. But - there are many tractor collectors who care nothing about how useful the tractor can be, or about the bad reputation of the 1010/2010 series in general. For some people, it's a Deere and that's all that counts. I wouldn't be surprised if the guy gets his price - although it would never be from me. One case in point. I went to a farm auction last summer. It was a local farm - the old guy died. There was a 2010 wheel ag-tractor that had been sitting out in the field for the past 25 years - with the head off the engine, no hood on it, and many parts missing. As far as I could tell - a parts machine only. I'm sure it was apart because something blew years ago. Next to the 2010 was an air-cooled diesel Porsche tractor - from the late 50s I think - complete and not set-up. Well - the Porsche went for $700 - which seemed pretty cheap to me. And the 2010 junker? Brought $1600. Can't figure some of this stuff out - maybe I'm just too cheap.

[Log in to Reply]  [No Email]
G/MAN

03-04-2007 12:41:32




Report to Moderator
 Re: 2010 value, What do you think? in reply to Steve Crum, 03-04-2007 09:31:55  
I'm not a 1010/2010 expert or even much of a fan, but I'd agree that $4000 seems a little high. The fact that he's been sitting on it for a year would seem to back that up. There's enough Deere freaks out and about that even a tractor with a less-than-stellar reputation like a 1010 shouldn't hang around that long if priced reasonably. On the plus side, it looks to have some redeeiming qualities. The tin work looks pretty decent from what I can see, it's got that nice little front weight set on it and the tires at least hold air and are serviceable enough to get it around til it "deserves" some new rubber. I'd be a little leery of the engine with the intake being unhooked, and would probably want to at least do a compression check and give it a good going over in general, particularly if he doesn't want to come down much. Those little engines have that fine "deck sleeve" construction and can be a little pricey to rebuild. Talk him down, get a decent deal and build yourself a nice little 2010. Kind of a cute little devil, if nothing else.

[Log in to Reply]  [No Email]
Steve Crum

03-04-2007 12:48:47




Report to Moderator
 Re: 2010 value, What do you think? in reply to G/MAN, 03-04-2007 12:41:32  
I thought 2 grand to be a fair price, but the guy refuses to talk less than 4 grand (price of crack must be up). Brad is going to college in that town and TT will be in 2 years so I'm figuring I have about 6 years to watch this one.



[Log in to Reply]  [No Email]
G/MAN

03-04-2007 12:59:34




Report to Moderator
 Re: 2010 value, What do you think? in reply to Steve Crum, 03-04-2007 12:48:47  
Amazing how some people will let something sit and rot in order to get what they think it's worth rather than take a little less and send it to a good home, isn't it? I guess when we talk about something being "worth" what the buyer will give and the seller will take, that's what we're referring to. I guess you can't blame the guy too much. Lot's of people have been "taken" pretty badly when selling something relatively rare and valuable for next to nothing to someone that wasn't bothered a bit by offering next to nothing for something they knew others would pay much more for. Hearing about those kind of deals and the tremendous popularity of John Deere as a whole lead some to sit on relatively common stuff like it's a golden egg, even when made a fair offer on it.

[Log in to Reply]  [No Email]
Osage

03-04-2007 11:41:24




Report to Moderator
 Re: 2010 value, What do you think? in reply to Steve Crum, 03-04-2007 09:31:55  
Steve:

She looks a little rough for 4K. As for the PTO on some of the older one's including the 1010's the PTO shaft continued to turn even though it was not engaged.

I think I would agree with MSB and hope that the restoration expenses didn't stack up too high.

Osage



[Log in to Reply]  [No Email]
msb

03-04-2007 11:27:08




Report to Moderator
 Re: 2010 value, What do you think? in reply to Steve Crum, 03-04-2007 09:31:55  
$2,000-2,500 would be my absolute top bid.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy