Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

4020 JD

Welcome Guest, Log in or Register
Author 
the flying Belg

02-11-2007 19:29:11




Report to Moderator

As a teen growing up on a farm in the 60s wit JD. 2 cylinders I always wished we had a 4020. I still believe as many others do that it was the best farm tractor ever built. Question. Im sure they probably had a week point or a reputation of something being bad. what would that be. evan today when you go in a JD. shop and there is a 4020. What are they repairing on it? In 1972 Pa bought a new 4230 and that was a good tractor but never gained the reputation of the 4020. He did have miner ijector problems with the 4230.

[Log in to Reply]   [No Email]
Raleigh

02-13-2007 08:45:35




Report to Moderator
 Re: 4020 JD in reply to the flying Belgian, 02-11-2007 19:29:11  
WOW!!! Good Post with Good responses!!!!



[Log in to Reply]  [No Email]
Mike M

02-13-2007 08:52:38




Report to Moderator
 Re: 4020 JD in reply to Raleigh, 02-13-2007 08:45:35  
How are you getting along with yours ? Did you ever post any pictures ?



[Log in to Reply]  [No Email]
Raleigh

02-13-2007 16:50:28




Report to Moderator
 Re: 4020 JD in reply to Mike M, 02-13-2007 08:52:38  
I need to post pictures, my machine is about 1 45 mins to 2 hours away!! Tomarrow I am getting yet another freakin Bushhog! So Maybe I f can remember I will take some photos. But Iget up ther and get caught up in the moment and forget, then the nextr thing you know money is all spent and the weekend is over..



[Log in to Reply]  [No Email]
WTW

02-12-2007 07:13:25




Report to Moderator
 Re: 4020 JD in reply to the flying Belgian, 02-11-2007 19:29:11  
Here is a JD's mechanics point of view that has worked on allot of these tractors in the last 30 years. First all old tractor wear out including 4020's. In there day worked to there full potential I would say the weakest link would had been the load shaft seals. Second would have been the water pump. Third would be the traction clutch on the Syncrorange but not a bad clutch if used correctly or compared to the competition at the time, but it would wear out and require service several times in the life of a 4020. The 24 volt system was actually on of the better features when up in shape as they would crank and start better. The 24 volt system got a bad rap as allot of people didn't understand them and when these people messed with them in most cases would create a bigger problem than they were. I would take a 4020 24 volt system any day over any conversion. Just got to understand and know how to take care of them. Your 4230 clutch was the best traction clutch that John Deere ever put on a farm tractor. The 4020 "clutch" does not even compare to a Perma clutch as used on all the later 30, 40, 50 and 55 series manual transmission tractors. The 4020 was defiantly a good tractor in its day but there were allot of improvements that were made off/after it on later tractors. DW

[Log in to Reply]  [No Email]
ET

02-12-2007 06:43:07




Report to Moderator
 Re: 4020 JD in reply to the flying Belgian, 02-11-2007 19:29:11  
I think the load shaft seals were one of the greatest weak points. On some tractors it seems you put them in every year. Its not quite so bad now that not to many 4020's are pulling plows. When those seals leak and the transmission oil gets low it causes a lot of other problems. I agree with Bob, the biggest problem with the 24v system was a lack of understanding.



[Log in to Reply]  [No Email]
Bob

02-11-2007 20:05:31




Report to Moderator
 Re: 4020 JD in reply to the flying Belgian, 02-11-2007 19:29:11  
The most common MAJOR repairs I see to 4020's are leaking sleeves and/or sleeve "O" rings, and "upper shaft" transmission repairs (forks, synchros, and shift collars).



[Log in to Reply]  [No Email]
Gerald J.

02-11-2007 19:47:44




Report to Moderator
 Re: 4020 JD in reply to the flying Belgian, 02-11-2007 19:29:11  
The gas 4020 is the third worst on fuel consumption after a couple hydrostat IH gas tractors. But it sells for enough less its still economical.

The diesel injection pump has parts that are failing and needing it to be rebuilt.

The 4020 is the first complicated tractor compared to the previous (well not much more complicated than the 4010 unless the 4020 has the power shift transmission) and parts do wear out.

Check out the hours on those you see in the shops and ask how many times has the hour meter been around. Look at the generator and water pump pulley grooves.

They may also be in the shop for restoration as a collected tractor these days.

They do break, push pull cables rust fast, gaskets leak, they can wear enough to burn oil, or leak oil out the seals on the load control shaft underneath, or need injectors, injection plumbing, water pumps, radiators, hydraulic pumps, oil pumps, fuel pumps or wiring repaired.

Good they are, invincible, they are not, but even with repairs they do a lot of work for their cost.

Mine is gas.

Gerald J.

[Log in to Reply]  [No Email]
POOR DIRT FARMER

02-11-2007 19:37:54




Report to Moderator
 Re: 4020 JD in reply to the flying Belgian, 02-11-2007 19:29:11  
WELL WE HAVE A 68 - 4020 AND A 74 -4230, I LIKE THE 4230 BETTER, BUT THAT 4020 IS A HECK OF A TRACTOR , JUST LOOK AT WHAT THE REST OF THE TRACTOR COMPANIES AT THE TIME WHERE MAKING TO GO AGAINST THE 4020, NOT NOTHING IN THE SAME CLASS. THE 24 VOLT ELETRICAL SYSTEM IS A BAD FAULT ON THESE TRACTORS. MATTER OF FACT I HATE IT. BUT OVER ALL THE 4020 IS STILL IN MY OPION A GREAT BENCHMARK FOR TRACTORS OF THAT SIZE.

[Log in to Reply]  [No Email]
Bob

02-11-2007 20:03:04




Report to Moderator
 Re: 4020 JD in reply to POOR DIRT FARMER, 02-11-2007 19:37:54  
It's not so much that the 24-Volt system was inherently BAD, as the fact that it was never too well understood by the average owner or mechanic.

Nowadays, even Deere mechanics who understand it are as scarce as hen's teeth.



[Log in to Reply]  [No Email]
ED WINBERRY

02-14-2007 08:58:38




Report to Moderator
 Re: 4020 JD in reply to Bob, 02-11-2007 20:03:04  
CAN SOMEONE PLEASE DRAW A DIAGRAM OF HOW TO WIRE THE STARTER AND SOLENOIDS ON A 24-VOLT 1968 4020D. OR MAYBE YOU CAN EXPLAIN IT SO THIS D.A.CAN FIGURE IT OUT.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy