Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

7020 john deere turbo troubles

Welcome Guest, Log in or Register
Author 
francis pawelek

01-15-2007 15:40:14




Report to Moderator

for the 2nd time in 1 month i've been thru a second turbo,is there some way that a brand new rebuilt engine could have missed an area that was not cleaned out right?the oil line that feeds the turbo bearings oil is not clogged either,or could a reman turbo just come off the shelf bad?theres like an oil cooler whgere the oil feed line comes off of that leads into the turbo,theres a small allen screw plug under it,should this be drained also and add a new filter and oil as well when the 3rd turbo is added?where else can i clean at?what about flushing lines with varsol in case theres something eating up the turbos seal and allowing it to dump oil?

[Log in to Reply]   [No Email]
msb

01-16-2007 08:14:52




Report to Moderator
 Re: 7020 john deere turbo troubles in reply to francis pawelek, 01-15-2007 15:40:14  
Wrote a long reply last night and then it got lost in cyberland when I went back to include an h.
The long and short of it is I would suspect you have some sort of contamination in the oil. I would draw an oil sample and send it out for analysis.On my way to help guide some guys working on a 1520.I'll try to get back with you this evening.I have a lot of questions to ask you.



[Log in to Reply]  [No Email]
FRANCIS PAWELEK

01-16-2007 16:45:36




Report to Moderator
 Re: 7020 john deere turbo troubles in reply to msb, 01-16-2007 08:14:52  
well i dumped the oil this morning,cleaned the oil cooler out,then pulled thew 2 check valves,added new oil,new turbo may be in tomorrow



[Log in to Reply]  [No Email]
4010 Pride

01-15-2007 18:51:15




Report to Moderator
 Re: 7020 john deere turbo troubles in reply to francis pawelek, 01-15-2007 15:40:14  
Francis, there is a guy on here under the screen name of MSB. He is really knowledgeable with the 404ci turbo and non-turbo.Hopefully he"ll respond to you. There are a number of things you should be careful of when installing a new or reman turbo. Make sure your oil RETURN line is large enough to handle the volume of oil coming off the bearings in the turbo. If it can"t handle the volume and the oil pressure is obviously pushing oil into the turbo at the normal rate, than it could blow your seals out. The gentleman in the other response was also correct in saying that you should pre-lube the bearings with oil before installing it. Just drip some oil into the connector flange where the feed line couples in, spin the shaft by hand a few times. Also, after you get it bolted up, you should turn it over with the fuel cut out (on the dash of tractor) closed for a couple minutes. This will allow the oil pressure to push some oil up the line and into the turbo before you start the tractor and wind the turbo up with exhaust pressure. Also, there are 6 allen header 1/8"npt plugs in what is called the oil galley area of the block. They are on the right hand side, almost even with top of the tractor frame rail...they are tapped holes right into the block. This is a great place to get oil pressure if the factory area isn"t working for you. Also, you should install a filter in your oil feed line to ensure the oil is CLEAN before reaching the turbo bearings. Make sure your oil pressure is correct as well. Good luck. Jon in NY

[Log in to Reply]  [No Email]
FRANCIS PAWELEK

01-16-2007 16:53:05




Report to Moderator
 Re: 7020 john deere turbo troubles in reply to 4010 Pride, 01-15-2007 18:51:15  
well i spent much time this morning back cleaning out the turbo oil line,then the cooler that its hooked on by running varsol and blowing out a lotta old oil,,then poured some into where the oil filter mounts,then pulled the 2 plugs under the oil filter to find 2 springs with valves on then that were cleaned,,,then after that dumped some varsol thru the oilpan as well,,
first thing i really did was drain the oil for sure,
now,the guy who built this motor ended up putting on my old oil filter ,,,that was not good to start with,,
now i have a brand new filter,brand new 10-40 castrol,,and 2 new air filters,,
before the turbo is put back on,i plan on adding some stp oil treatment down in the new turbo oil area and see it come out of the bottom too,cant let this go again man

[Log in to Reply]  [No Email]
Greg_Ky

01-15-2007 16:05:53




Report to Moderator
 Re: 7020 john deere turbo troubles in reply to francis pawelek, 01-15-2007 15:40:14  
Replace the oil cooler. They are great at storing debris no matter how well you think that you cleaned it. Also prelube the turbo before installation.



[Log in to Reply]  [No Email]
francis pawelek

01-15-2007 17:15:59




Report to Moderator
 Re: 7020 john deere turbo troubles in reply to Greg_Ky, 01-15-2007 16:05:53  
hi greg thanks for that info,is it located inside the green intercooler right under the turbo?is there any way of cleaning it?i'm thinking that its located inside the large green manifold where the turbo is connected,but theres also the tall tube where oil is pumped up the tube to lube the turbo,



[Log in to Reply]  [No Email]
Glen in TX

01-15-2007 18:36:17




Report to Moderator
 Re: 7020 john deere turbo troubles in reply to francis pawelek, 01-15-2007 17:15:59  
A intercooler would have like a small radiator with engine coolant flowing thru it inside the air intake manifold. If air cleaner got a hole in it or foam or tubing leaks on intake yes it can get sucked full of trash behind the intercooler core inside. The engine oil cooler is the one on side of engine. Hydraulic oil cooler is in front of radiator. 7020 parts catalog is available online.

[Log in to Reply]  [No Email]
FRANCIS PAWELEK

01-16-2007 16:58:34




Report to Moderator
 Re: 7020 john deere turbo troubles in reply to Glen in TX, 01-15-2007 18:36:17  
i went thru my shop manuals and recleaned all oil areas,oil cooler,turbo line,oil filter holder,and the 2 valves under that,then the oilpan,then blew in there with air real good,added new oil,and filter,and new air filters,i think i'm going to run some stp oil treatment into the new turbo when i get it in tomorrow to coat it before i hit any start buttons,
i bumped the starter and let the turbo line pump oil today for about 30 seconds too,its pumping oil in too

[Log in to Reply]  [No Email]
Glen in TX

01-17-2007 13:36:06




Report to Moderator
 Re: 7020 john deere turbo troubles in reply to FRANCIS PAWELEK , 01-16-2007 16:58:34  
Ok well I too was hoping MSB would come back and ask you more questions last night or today. He could cover other things on it better than I could. The oil analysis is a good idea since someone else was in it before you now and see what else might show up in oil. Like I said before check the air cleaner assembly well. That setup on 7020, 7520 & 6030 was one of Deere's poorer air cleaner designs and famous for that foam blowing out leaking dirt and crud into or past the filter. Check the hose for cracks or holes and clamps also. If the intake stack has ever hit anything and bent pipe bracket bending it any the foam between it and air filter cannister won't stay or seal right either. Had best luck sealing those over on sides and outside with black silicone sealer to hold in place and then let it cure well before starting engine. Have seen once where someone left both filters out outer and inner with lid off while going to clean them or get new ones. They came back and reinstalled filters but didn't know while they were gone so long a bird built quite a nest in intake hose and it all got sucked into the intercooler when tractor was started lol. Fun mess to clean out later and has happened before.

[Log in to Reply]  [No Email]
Greg_Ky

01-15-2007 17:43:36




Report to Moderator
 Re: 7020 john deere turbo troubles in reply to francis pawelek, 01-15-2007 17:15:59  
Not sure on what type of cooler that is. When ever I had engine failure on the race cars I always replaced the oil coolers because the type that we used you could not clean all the debris out.If you reused the oil cooler you were almost guaranteed another failure.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy