Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

John Deere piston rings

Welcome Guest, Log in or Register
Author 
bigtim72

01-12-2007 17:58:11




Report to Moderator

rebuilding my john deere D and was thinking about leaving out one piston ring in each cylinder would that increase horse power very much? there would be three comp. rings instead of four and one oil ring each. any ideas?




[Log in to Reply]   [No Email]
johns48jdb

01-13-2007 14:41:19




Report to Moderator
 Re: John Deere piston rings in reply to bigtim72, 01-12-2007 17:58:11  
i wouldn't second guess jd engineers. they've been doing this for so long they know what is right.



[Log in to Reply]  [No Email]
Glen in TX

01-12-2007 22:49:54




Report to Moderator
 Re: John Deere piston rings in reply to bigtim72, 01-12-2007 17:58:11  
I don't understand why you want to do that anyway but according to BIG LOU in West Michigan down below I dont know nuttin anyway? lol. Tim, Why not just bore for more cubes or up the compression with longer pistons or shave the block and head off some? You can shave more than you think off the back side of a D block for more compression and it has been done on many for years. Look at what the stock compression rating on a D was compared to other 2 cylinders made to run on gasoline.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy