Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Another 4020 question.

Welcome Guest, Log in or Register
Author 
Tray C.

12-21-2006 23:42:59




Report to Moderator

I�m sure you guys are tired of talking about 4020�s but I�m trying to get as much info as I can before I buy one. Ok I�m kind of leaning toward a late model even though they are higher in price I�m willing to pay more I think. My considerations are either a 4000 or a 4020 either should get the job done but getting into more detail I wanted to know more about the engine specifically the diesel. I was told that early models had leak problems with the O-rings around the sleeves and I looked in my parts book and it shows models 280000 and older have 2 and later 280001 have 3 but that makes only one year 1972 and late 72 at that and those seem to be really hard to find. That brings me to another point, people say the 4000 and 4020 have the same engine right? But what I have noticed is for late 72 serial 280001 and later there are two blocks available MARKED R47170 OR R48440 excluding air conditioned model block which have a separate number does this mean there were different blocks used for the 4000 and the 4020 and remember the 4000 is lighter so they could have shaved off weight any place they could find and internal parts would still work? The reason I�m saying that is that serial number of 280001 is already close to the point of no more 4020�s and I just don�t see changing a casing within a few months of each other unless one is lighter duty thinner cast for a 4000 and the other a heavy cast 4020. Yes they both cross over to one number for a replacement but that still doesn�t really disprove anything its just the closest equivalent they had at the time and its NLA. What about the heaters some models have a block with a knock out plug to install a heater and other engines have one of those canister types but the parts book doesn�t say what serial numbers are which just 201000 and newer is this true they can use both? And my final question is that long shifter on syncro models was it 71 and 72 only from what I have noticed it seems so but I could be wrong.

I hope some of you guys are willing to read all this and answer my questions I truly want to know these things and the dealer doesn�t seem to know much.

[Log in to Reply]   [No Email]
buickanddeere

12-22-2006 14:28:12




Report to Moderator
 Re: Another 4020 question. in reply to Tray C., 12-21-2006 23:42:59  
I can't hurt to price a 4230 and a 4430 before opening your wallet for a 4020. Much quieter cab & other improvements.



[Log in to Reply]  [No Email]
Tray C.

12-22-2006 16:23:08




Report to Moderator
 Re: Another 4020 question. in reply to buickanddeere, 12-22-2006 14:28:12  
Thanks guys, I did get some good answers I'm still a little confused as to the engine differences between the 4000 and 4020 blocks but its probable irrelevant anyway just curious to see if my theory was true. I have considered a 4320 since they run actually a little cheaper than a lat model 4020 and a turbo sounds sweet when running at full load. I had a 4430 way back when and I loved it but for me with only 100 acres of land it seems to be a little large for my needs plus my implements are too small for such a tractor. I do wonder how much physical size larger a 4320 is to me it seems longer than a 4020 but I have never seen them next to one another to compare. Also my question is fuel economy with the turbo 4320 use less gallons per acre than a 4020 for the same size implements?

Again thanks for all the feedback I enjoyed reading what you all had to say.

[Log in to Reply]  [No Email]
buickanddeere

12-22-2006 23:44:33




Report to Moderator
 Re: Another 4020 question. in reply to Tray C., 12-22-2006 16:23:08  
Alright, how about a 4230?



[Log in to Reply]  [No Email]
Nylon

12-22-2006 12:53:08




Report to Moderator
 Re: Another 4020 question. in reply to Tray C., 12-21-2006 23:42:59  
Another question to ask since I dont know the answer is:

Does the 4000 come with differential lock. I am not a heavy ag farmer. But do pull a plow on occasion amongst other things. That diff lock has its blessings. I really like having it on my minnie 4020...the 790 compact as well. Not sure if 4000 has foot throttle either.....something I really like on loader tractors. Often you but things with features you never use or need. Everything on my 4020 gets used...only thing that hasn't is the belly pto and that still may be driving something before too long.

I have also seen some of the postings mention that early 4020 is nice when you have remotes and you plumb in a joystick. Your remotes are free and not banging knee on console. I have a 68 converted to 12V with 2 remotes that I plumbed in a joystick with the aid of posters on here:] I like the 12 volt because I have no problem with cranking power or starting. And I am a smart guy but that 24v troubleshooting I would find aggrevating. Right now I have my loader on and a snowblower on back with hydraulic chute pluged into a remote...or loader and blade with hydro angle. This set up is great. So if earlier models are cheaper I would opt for that type of set up anyway. Again there have been a few times diff lock has saved my bacon from burying myself in the bottom of a swamp or skidding down trees in the winter or not tearing up a road backing onto it uphill with heavy loader load and spinning one wheel or plowing in a low spot with poppel root and tag alder enchroachment and etc etc.

My $2 worth...2 cents adjusted for inflation and deere parts :]

[Log in to Reply]  [No Email]
JD Jim

12-22-2006 16:05:40




Report to Moderator
 Re: Another 4020 question. in reply to Nylon, 12-22-2006 12:53:08  
Yes 4000 has diff lock, standard option as it was on later 4020.You have to remember that 4000 was side console only, so had all later improvements, just smaller axles and less tin. I have an early 3020 that does not have diff lock. Dont know about 10 series



[Log in to Reply]  [No Email]
G/MAN

12-24-2006 12:38:38




Report to Moderator
 Re: Another 4020 question. in reply to JD Jim, 12-22-2006 16:05:40  
I don't think diff-lock was available on a 10-series. There's no reference to it in the parts book and I can't remember having ever seen one.



[Log in to Reply]  [No Email]
Gerald J.

12-22-2006 15:36:47




Report to Moderator
 Re: Another 4020 question. in reply to Nylon, 12-22-2006 12:53:08  
I second the need for differential lock. I use it a lot. One time disking in plowed ground without out the 4020 got to bounding side to side and ripped the muffler off. It doesn't do that with the differential locked.

I think differential lock was an extra cost option on the 4020, I have no idea on the 4000. Its not somthing to be easily added later.

As for 4000 using the 4010 tranmission, that may be more of a concept of sizes, but the PTO for the 4000 like that of the 4020 is consideraby improved from the 4010. I don't know about the 4000 not having the front PTO, I don't have data on the 4000, like shop manual, owner's manual, and parts book. Since my 4020 is a SN 184,000 range, the manauls and parts book don't show side console parts.

Gerald J.

[Log in to Reply]  [No Email]
msb

12-22-2006 08:11:36




Report to Moderator
 Re: Another 4020 question. in reply to Tray C., 12-21-2006 23:42:59  
Don't be concerned about the block numbers being different.Some are only minutely different in ways that don't affect the quality of the engine at all.It could have only been from using a slightly different casting sand or something like that, so Deere could track the reliability of such.I doubt you could find anyone alive now that could tell you how each casting number is different than the earlier ones unless you drop back to a 1968 model engine.
The 69 and up blocks were narrowed up in an effort to cut down on the headgasket slobber on the right side of the engine the early production years were more prone to do.To accomplish this Deere had to go to a mushroom style cam follower,but no longer could you pull the followers without removing the camshaft, but there again that is no big deal.This change also allowed using a longer headbolt on the right side of the block since a part of the slobber problem was from the big difference in the much shorter length of the right side head bolts which tended to stretch more than the longer bolts.
The 4000 and 4020 engines were the same throughout.Nothing was shaved off the 4000 engine.
Both engine block heaters work equally well, so that should not concern you.
I don't really think there was that much difference in relability concerning the o-rings on the sleeves.Maybe a slight advantage to the later models that didn't have the weep holes.That allowed using either two or three packings at the bottom of the sleeves.Deere tried several different materials in those packings in an attempt to find the best material possible.We even got some overhaul kits and were told in service school or through service bulletins to use a later o-ring set than what came in the kit.
For that matter some guys are now using 3 packings in the older(with weep holes) with reasonable success these days.But there again---no big deal!
The shift lever is interchangeable.Had one young buck customer who had me install one off a 5020 before the serial number break came out because he thought it looked more rugged and powerful. I think Deere thought the same.Certainly there was no need for the longer lever on a 4020.
Don't blame the dealer for not knowing what I would call trivia.Few people at Deere today would know the answers to your questions either.

[Log in to Reply]  [No Email]
John51

12-22-2006 07:41:01




Report to Moderator
 Re: Another 4020 question. in reply to Tray C., 12-21-2006 23:42:59  
The 4000 and late 4020 have EXACTLY the same engine. The basic tractor is identical. The 4000 was a less expensive, lighter 4020. Money was saved on battery boxes, lack of sheet metal around the platform, 2 headlights, a lighter 3 pt hitch, floor mat, smaller tires, no front PTO,etc. All these things, or lack of them, made a less expensive tractor to sell. Weight is less because of those items plus smaller outboard axles, lighter wheels and tires and a few other minor items. Think of it this way....the 4020 was the deluxe version while the 4000 was the basic version. They will do the same work. I have both and do the same jobs with either one.

[Log in to Reply]  [No Email]
jdeere70

12-22-2006 08:16:33




Report to Moderator
 Re: Another 4020 question. in reply to John51, 12-22-2006 07:41:01  
The 4000 had a lighter engine block more similar to the 4010. The rear end was also more like a 4010 with the exception of the axles. They were the same as a 4020



[Log in to Reply]  [No Email]
Way OFF

12-22-2006 11:22:24




Report to Moderator
 Re: Another 4020 question. in reply to jdeere70, 12-22-2006 08:16:33  
Your comment could be no further than the truth. Read the other comments above as they are correct. The 4000 has no parts or relationship to a 4010 except for wheel centers, if the 4000 was equipped with a 15.5 tire. The 4000 is the same base tractor as a 4020 with a few/lesser options. The only thing lighter on the 4000 over the late 4020 was the hitch arms, rear axle shafts and wheel centers. Both tractors use the same parts book and share the same common part numbers that show the true actual differences/commonality between the two. A part book don't lie.

[Log in to Reply]  [No Email]
jdeere70

12-22-2006 14:09:22




Report to Moderator
 Re: Another 4020 question. in reply to Way OFF, 12-22-2006 11:22:24  
Every 4000 I ever saw had the light block in it originaly. The parts books list the replacement parts, not what the tractor was shipped with.



[Log in to Reply]  [No Email]
G/MAN

12-24-2006 12:36:06




Report to Moderator
 Re: Another 4020 question. in reply to jdeere70, 12-22-2006 14:09:22  
What are you calling a "light block"? That doesn't even make any sense. They didn't see anywhere near as many 4000s and 4020s but they supposedly built a special "light block" for a 4000 when the regular 4020 block would do the same job, and while they were taking weight off the tractor in other areas? That makes absolutely no sense at all. If they were so adamant about having a "light block" in the tractor when it left the factory, they sure as heck would have kept providing one for service parts replacement also. So what exactly is the weight difference between a light block and a standard block? What's casted differently to reduce the weight? Sorry, I'm no New Gen expert, but I gotta call b.s. on that one also.

[Log in to Reply]  [No Email]
low budget

12-22-2006 05:42:32




Report to Moderator
 Re: Another 4020 question. in reply to Tray C., 12-21-2006 23:42:59  
Your wise to ask questions but I don't know all these answers. All I know is there is a couple of different kits depending on serial number. The longer shift lever came with the change to side console in 69, I'm not positive, my 69 is a powershift. My 71 has it. It does get the shift lever away from the throttle and steering wheel, little nicer but no big deal. . There's probably no such thing as a bad 4020, just find one that hasn't been abused for a resonable price and enjoy it. If you really want a few more refinments maybe you should consider a 4230. You have to decide for yourself what you need or want and what you can live without. Any used tractor will have some problems, you just want to avoid the big and expensive ones. You can get alot of work done with a tractor with an engine that is a little tired. Heck, I had a friend that bought a 4020 for $4200, was missing 2nd, 5th, 7th and 8th gears. They used it for years and when they did fix it, it wasn't all that expensive. The hyd system is so integral to the operation of these tractors that it would be my major concern. And there will be problems you will miss or develope unexpectedly. And two weeks after you buy one, you'll find one in better shape for less money.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy