Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

830 JD (1958)

Welcome Guest, Log in or Register
Author 
Richard Kinney

12-14-2006 20:08:11




Report to Moderator

Why does my tractor have excessive fuel discharge through the exhaust, even at high idle? I assume the injectors need to be rebuilt. Are there any other reasons?




[Log in to Reply]   [No Email]
Bob

12-14-2006 21:18:37




Report to Moderator
 Re: 830 JD (1958) in reply to Richard Kinney, 12-14-2006 20:08:11  
Are you observing this after it has warmed up to operating temperature from working, or simply barely warm from "putzing around"?



[Log in to Reply]  [No Email]
Mike M

12-15-2006 04:26:37




Report to Moderator
 Re: 830 JD (1958) in reply to Bob, 12-14-2006 21:18:37  
Even "putt-zing around" these should burn clean !

If they don't you need injection work and a good chance compression is low too.



[Log in to Reply]  [No Email]
Bob

12-15-2006 06:19:55




Report to Moderator
 Re: 830 JD (1958) in reply to Mike M, 12-15-2006 04:26:37  
They DON'T burn clean, though, if they don't warm up.



[Log in to Reply]  [No Email]
Mike M

12-15-2006 06:48:37




Report to Moderator
 Re: 830 JD (1958) in reply to Bob, 12-15-2006 06:19:55  
Mine do burn clean, hardly see any smoke unless pulled hard, and they see very limited use for the most part. I spent good money to get them that way. Put everything back to spec.



[Log in to Reply]  [No Email]
Bob

12-15-2006 14:07:25




Report to Moderator
 Re: 830 JD (1958) in reply to Mike M, 12-15-2006 06:48:37  
I have no idea where he is located, and how cold it is there,b but I have been around quite a few 2-cylinder diesel Deeres that "wet stack" if they aren't warmed up.



[Log in to Reply]  [No Email]
F-I-T

12-15-2006 14:26:53




Report to Moderator
 Re: 830 JD (1958) in reply to Bob, 12-15-2006 14:07:25  
I dunno, Bob. In my short life around these two cylinder diesels, stack slobbering is almost always eventually traced to worn rings and bores, worn piston ring lands, nasty injector tips, worn out valve guides, and never just one of those things. Had a fella tell me his would be better after an hour of getting hot on the dyno, and after an hour of burning paint from places he didn't know had paint, it was just blowing the unburnt fuel and soot in a bigger circle. I re-bored, re-pistonned, re-injectored, and re-everythinged my 70D that had slobbered for the years that my Dad had it, and now it is dry every hour, hot or cold. It cost me more using my labor than the tractor cost new to do that, but I was reversing 7,000+ hours of pretty rough treatment. IMHO, it generally boils down to wear.

[Log in to Reply]  [No Email]
Bob

12-15-2006 15:53:54




Report to Moderator
 Re: 830 JD (1958) in reply to F-I-T, 12-15-2006 14:26:53  
My longest-term experience was with an 830. My Dad and Uncle bought it when it was a couple of years old, and we used it up to about 1980. I was born in 1957, and one of my VERY early memories was when the Massey 55 diesel left, replaced by the 830.

It had an OH at a Deere dealer, by an old time John Deere mechanic, including a re-bore, and injection work, a few years before we sold it, and would always slobber a bit, over all the years I can remember, unless it was warmed up, NOT always an easy thing to do up here in the COLD north, in the fall, or early spring with the temperatures in the upper 30's to 50's.

I had a 730 for many years, used for making hay and running a grain dryer. That one had LOTS of hours on it, and burned some oil, but I guess I would have to say I don't recall it being nearly as bad as the 830 was for "wet stacking" when cold.

The 830 had TONS of power, got great fuel economy, didn't use oil, and started well, but ALWAYS tended to slobber a bit when cold.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy